Construction of Thozhi Working Womens Hostel building (100 beds G plus 2) with development works at Perundurai in Erode District

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

2.6: Supply and filling of 40 mm HBSJ

2.7: Supply and filling of 20 mm HBSJ

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24: Manufacturing & supply of steel windows (Weight basis)

25: M.S.Holdfast

30 : Ellispattern

31 : Weathering course

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

47 : S & F Alu Towel rail 75 cm long

48: S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3: C.I. Steps ( 5 kg)

Electrical arrangements 69 : 16 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112 : S & F of Exsaust Fan 300mm dia

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.2.1.1 : Standardised concrete Mix M25 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b. In Ground floor

c. In First floor

d. In Second floor

e. In Third floor

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and Basement

b.In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors b.In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a) In Stilt/ Ground Floor

b. In First Floor

c.In Second Floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a) In Foundation and basement

18.1 : Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

f.Curved surface

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1000mm x 2100mm (Single Leaf)

21.5.5.2: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1800mm x 2100mm (Double Leaf)

22.3.3 : T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

23.2.1 : 4mm thick pin headed Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx16 to18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1: Rain water harvesting using defunct borewell and providing perforated cover slab (M30) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150mm (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1: Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4: S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5: PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1: Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm (using Curshed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.2.2 : PVC Equal Tee as per BIS 7834/1975 b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

87.1: Supplying and delivery of Three phase ELCB/RCCB

90.1: Providing additional strutting to centering of plain surface For every 1m Height a) 3m to 4m Height

98.3.2 : TW Double leaves panelled door shutter (with brass fittings) a. 1800 x 2100mm (double leaf)

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361: Concrete designer tiles flooring (using crushed stone sand)

365.1.1.1 : Supply and Laying of Stain Free Nano Polish Vitrified Tiles size of 600 x 600 x 8mm Flooring in C.M 1:3 20mm Thick incl. pointing (using crushed stone sand)

367 : Providing wooden (melamine) polish for new wood

379.4.2: S & F of Granite slab of size 4'x2', 18 to 20mm Thick For kitchen arrangements (jet black) C.M 1:3, 20mm tk (using crushed stone sand) a. In Ground floor

b. In First floor

c. In Second floor

383.4: Providing double nosing to the edges of Granite slab

488.2 Providing PVC Tee with end cap

ANNEXURE - II A1: Supplying and filling stone dust.

A2:Supplying of 3 to 10mm size HBSJ including conveyance

A3: Supply and Laying of Granite wall cladding (Satharlic Grey, Paradise and similar varieties) ) of 10mm thick in C.M 1:2 (using crushed stone sand) Including Cost of Materials, Labour charges etc., all complete and as directed by the departmental officers. (The colour and Quality should be got approved from the Executive Engineer before use)

A4: Supplying and laying of 83mm Rubber Moulded Hydraulic Pressed Paver Block incl.Cost of Material and Labours Etc.,

A5: Supplying and fixing of PVC Trims (Beading)

A6: Supply and fixing of APP membrance: Basic cleaning of the surfaces to remove dirt, dust, lose particles, providing and supplying a single coat of tar felt liquid membrane completing as per standard procedure and water proofing test etc., all complete and as directed by the departmental officers

A7: Providing one coat of Wallputty for new plastered surface

A8: Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

A9: Supplying and fixing in position of UPVC window of casement type( open) for all sizes

A10: Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN make) ‘GAZEL’ (or) Equivalent (with ISI Monogram)

A11: Supply & Fixing of Qute WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member.Supply & Fixing of 25mm (+/- 1mm) thick Qute WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the frame with minimum of 5 inch butt hinges of SS make.

A12: Supplying & fixing of Stainless steel Hand Rails for Staircase

A13: HDPE water tank 1000 liters capacity with ISI mark.

A14: Drilling of 150mm dia vertical bores in hardrock formation to any required depth using "DTH Rig" as directed by the departmental officers including labour charges for incerting casing pipe and etc., a) up to 150m below G.L

b) up to 180m below G.L

c) up to 210m below G.L

d) up to 240m below G.L

e) up to 270m below G.L

f) up to 300m below G.L

g) up to 330m below G.L

A15: Supply and delivery of 150mm of PVC casing pipes (6kg/cm2) as per IS 12818 /1992 of approved quality for borewells with average wall thickness of 6.1mm and inner/outer threaded ends in standard length of 3m including transporting charges to site of work and all other taxes etc., all complete as directed by the departmental officers. (The PVC casing pipe should be got approved from the EE before use )

A16: Supply and fixing of PVC 160mm dia top end cap of approved make 6.1mm thick with inner thread etc., all complete as directed by the departmental officers

A17: Supply and delivery of Nylon Rope for Bore-well including cost of materials and labour charges etc., complete as directed by the departmental officers. -

A18: Supply and delivery of M.S clamp set 65mm

A19:Supply and delivery of Follwing G.I specials GI Pipes “B” Class a.25mm dia GI pipe

b. 65mm dia GI pipe

c.32mm dia GM Gate valves

d. 32mm dia GM Non Return valves

e. 50mm dia GM Non Return valves

f. 50mm dia Union

g.65mm dia GI Bend

h.32mm dia GI Coupling

i.65mm dia GI Coupling

j.32mm dia GI Elbow

k.65mm dia GI Elbow

l.32mm dia GI HEX NIPPLE

A20:Supply and Delivery of Submersible motor Pumpset with ISI mark IS 8034 without Panel Board of 3H.P capacity electric motor pump set with accessories at bore well for Single phase operation etc..,all complete and as directed by the departmental officiers.(The brand of pumpset should got approved by the Executive Engineer before erection). 50 LPM x 175 Three phase

A21: Supply and Delivery of Openwell submersible motor Pumpset with ISI mark IS 8034 without Panel Board of 5 H.P capacity 50 LPM X 100m of electric motor pump set

A22: Labour charges for the erection of submersible pumpset in Borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board. Up to 5HP

A23: Supplying and delivery of MS fabricated DOL panel control board 3 to 4HP with ISI mark for three phase

A24: Supplying and delivery of MS fabricated DOL panel control board 5 to 6HP with ISI mark for three phase

A25: Supplying and laying 3 core 4 sqmm FLAT COPPER CABLE with ISI mark including cost of all materials specials etc. all complete.

A26: Supplying and delievery of the 32mm dia dia UPVC - Column pipe

A27:Supplying of following dia UPVC pipe &specials including cost of all materials of best approved superior quality with isi mark etc all complete and as directed by the departmental officers. (the quality of upvc pipe should be got approved from the executive engineer a.32mm dia UPVC pipe

b. 50mm dia UPVC pipe

c.32mm dia UPVC Union

d. 50mm dia UPVC Union

e. 50mm dia UPVC Tee

f. 32mm dia UPVC Elbow

g.50mm dia UPVC Elbow

h.50mm dia UPVC Hex Nipple

i.50mm UPVC Couplor

j.50mm X 32mm dia Reducer Tee

k.32mm dia UPVC MTA

l.50mm dia UPVC MTA

m.32mm dia UPVC FTA

n.50mm dia UPVC FTA

A28:Labour charges for the GI and UPVC pipe below ground level including earth work excavation, cutting, threading, jointing, lowering, laying to proper grade and aligement and refilling the trench with excavated earth etc., all complete and as directed by the departmental officers. a. 25mm Dia GI Pipe

b. 32mm Dia UPVC Pipe

c. 50mm Dia UPVC Pipe

A29: Supply and Fixing of CP two way bib cock with health faucet

A30: Supply and fixing of 9 watts LED bulb

A31: Supply and fixing of 4' 18 watts LED Tube Light

A32:Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A33: Supply and fixing of 25W LED street light

A34: Supply and fixing of 12 watts LED bulb

A35: Supplying and fixing of 63 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board

A36: Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

A37: Run off 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

A38: Supply and fixing of Single Pole 6A to 32A, 10KA Miniature circuit breakers

A39: Supply and fixing of 3 Nos.of 100 Amps - Fuse Unit

A40: Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

A41: Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed light Fitting including cost of fixing charges, tools, connetions and etc., completed as directed by the departmental officers.

A42: supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting

A43: Supplying and delivery of 3.5 Core 50 Sqmm UG Cable (PVC aluminium armoured LTUG 1100v grade) with ISI mark including cost of cable and conveying to the site of work etc., all complete and as directed by the departmental officers. [the brand and quality of the UG cable should be got approved from the executive engineer before use].

A44: Labour charges for laying of PVC aluminium armoured LTUG cable in a trench to a depth of 0.75m including earth work excavation, providing sand cushion, brick layer protection and refilling etc., all complete and as Directed by the departmental officers Below Ground level

A45: Labour charges for laying of PVC aluminium armoured LTUG cable on post and wall to make good etc., all complete complying with relevant standard specifications and as directed by the departmental officers Above Ground level

A46: Supplying and delivery of brass cable gland suitable for 3.5 Core 50 Sqmm PVC armound LTUG Cable with earth strip around the gland and cable termination with crimping of terminal with lugs etc., all complete as per relevant standard specification and as directed by the departmental officers. (The brand and quality should be got approved from the EE before use)

A47: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure and with 1no. 40ADP MCB type as incoming and 8 nos. 6A, 10KA SP MCB as outgoing with busbar and double door arrangements in flush with wall and making good of the concealed portion with earth connection

A48: Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door ) with 1 no. 160 A 4 P MCCB switch as incoming and 2 Nos. 63A 3P MCB , 6 Nos. 6A to 32A SP MCB as outgoing with suitable cable end box on wall with earth connection only. Higher End

A49: Supplying, fabricating, erecting and fixing Hilux (or)Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets

A50: Supply and fixing of Galvanium sheet 0.47mm Thick roofing arrangements including cost of material and labour charges for fixing the same with necessary blots and nuts etc., all complete

A51: Design, Supply, Delivery, Installation,Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons with 3 Floors / 3Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work including Vision Panel chagers per floor in Passenger Lift

A52: Annual Maintance Charges for lift i. For First One Year (Free) ii.For Second Year

A53: Supply, installation, testing and commissioning of following KVA Diesel Generator set complete with all accessories like engine, alternator, batteries with leads control panel, base frame, antivibration mounts, residential silencer,400 litres fuel tank, intake & exhaust piping, fuel oil motor operated pump, other miscellaneous accessories for the total set including test trial run at load for 8 hrs at factory (inclusive of consumable oil etc) necessary control wiring for battery charger etc., annunciation etc. as per specifications give detailed specification .with AMF Panel

A54: MS STRUCTURAL WORKS Providing and fixing M.S structural work fabricated from standard sections e.g. M.S. rounds, angles, channels, plates including cutting to size, welding, drilling with concrete drilling bits and fixing dash fasteners in RCC structural members as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps, etc.)

A55: SUPPLY & INSTALLATION OF 2.0 TR Split Type AC Unit - 5 Star Rated AIR CONDITIONER WITH COPPER COIL

A56: Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay etc.,all complete and as directed by the departmental officers.

A57: Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit) etc.,all complete and as directed by the departmental officers.

A58: Supply and fixing of MS stand for fixing outdoor unit etc., all complete and as directed by the departmental officers.

A59: Supplying and erecting in position of 50liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.

chendur construction company (BID ID -1276079)

EXCEL CONSTRUCTION COMPANY (BID ID -1268437)