PROVISION OF LIVING ROOM ALONGWITH BATHROOM AND TOILET AT POST NO.15 IN SHALATENG GARRISON UNDER AGE (I) CIF (K).

Amount

B/R items Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth and getting out, for foundation, or laying of cable in any type of soil, complete all as specified.

Cement concrete,1:4:8, type D-2 (using 40 mm graded crushed stone aggregate ) as in foundation, filling and mass concrete, complete all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete, all as specified and directed.

Earth filling under floor or paving, laid in layers not exceeding 25cm thick, spread, levelled and rammed including watering complete all as specified.

Hardcore of broken stone or boulders of gauge n.exc. 63 mm deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

75 mm thick plain cement concrete 1:4:8, type D-2 ( using 40mm graded crushed stone aggregate) as in sub base of floor, etc finished even and fair without using extra cement ,complete all as specified.

25 mm thick plain cement concrete 1:2:4 , type B-0 (using 12.5 mm graded crushe stone aggregate) as in floor to receive the tiles/floor finishes rough finished complete all as specified.

Non-skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick, of size 400 x 400mm as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match shade of tiles, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified. complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Glazed ceramic tiles, coloured, of size (300 x 200mm), thickness not less than 7mm as in vertical surfacessuch as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick bedding layer in cement mortar 1:4 complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Non-skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick, of size 300 x 300mm as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match shade of tiles, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified. complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Glazed ceramic tiles, coloured, of size (450 x 300mm), thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick bedding layer in cement mortar 1:4 complete all as specified. Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soil, complete all as specified.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point , complete all as specified.

2nd class soft wood (Kail) plain, solid, straight chowkats/frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, with one or more rebates, complete all specified.

35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

2nd class soft wood (kail), glazed and skeleton shutters for doors, 35mm thick, open rebated and prepared to receive glass or gauge etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, fitted to chowkat, complete all as specified.

2nd class soft wood (kail), glazed and skeleton shutters for windows, 30mm thick, open rebated and prepared to receive glass or gauge etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, fitted to chowkat, complete all as specified.

2nd class soft wood (kail), glazed and skeleton shutters for windows, 30mm thick, open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I for door shutters, complete all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified.

4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

Mild steel galvanised wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc, complete all as specified.

Solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. etc complete all as specified and as directed.

Aluminium anodised, barrel tower bolt of extruded section and fixed, 200 mm long (ISI marked), complete all as specified.

Aluminium anodised, barrel tower bolt of extruded section and fixed, 100 mm long (ISI marked), complete all as specified.

Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked), complete all as specified.

150mm long aluminium handles, fabricated type, anodised, ISI marked, complete all as specified .

100mm long aluminium handles, fabricated type, anodised, ISI marked, complete all as specified .

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 300 mm long, complete all as specified.

300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, complete all as specified.

Powder coated curtain rods 20 mm dia, fancy type in one length as per door/window, design and colour shall be as directed by Engineer-in-Charge including fancy type brackets complete all as specified.

PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in coping, bed blocks, hold fast blocks etc including necessary formwork required (if any) all as directed and as specified.

Mild steel work as in hold fasts, wind tie for roof including securing bolts etc, including all necessary drilling bolting or riveting etc, confirming to grade Fe- 290 Gde-E-165, complete all as specified and directed.

PCC 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in lintels over 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.

15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer's instructions, complete all as specified. Note : Integral water proofing compound shall be measured & paid for separately under relevent item.

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

Preparation of new plastered surfaces of wall with 2mm thick layer of wall care putty and applying two coats of oil emulsion distemper over a coat of suitable primer, complete all as specified.

Preparation of new plastered or concrete surfaces of walls and applying two coats of cement base paint over a coat of suitable primer, complete all as specified.

Mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 all as specified and directed by Engineer-in-charge .

Rolled mild steel work in main and cross beams, hip and jack rafters; purlins where connected to comman rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed.

Mild steel screw bolts (machine made) dia of neck 11 to 16mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm n.exc 30cm long, complete all as specified.

Plates (plain or chequered ) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc. conforming to Fe-410- W(Gde- E-250) quality B, complete all as specified.

Preparation of new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engr-in-Charge.

Preparation of new wood or wood based surfaces of any description not otherwise described exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges vally gutter ect. fixed with self tapping screws complete all as specified.

1.00 mm thick plain, black, mild steel sheeting, as in eaves boarding etc. complete fixed with welded or soldered jointed, complete all as specified.

Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling at any height complete, all as specified and directed.

Hangers at 1200 mm c/c to either side of 5 mm dia GI (up to 1200 mm length) adjusting level fixed to aluminium T with holding cleats and to purlin or rafters by means of ceiling cleat made out of GI flat 40 x 3 mm size 60 mm long and nut bolts 12.5 mm dia, 40 mm long complete all as specified.

Mineral fibre ceiling boards, moisture resistant of size 610 x 610 x 6mm inserted to GI/Aluminium framework with screws, all as specified.

Vitreous China, wash hand basin, flat back white or light colour of size 550mm x 400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC, 32mm dia waste pipe including cutting for and pinning in ends of brackets or erecting stand, complete all as specified.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia, complete all as specified.

Steel water tubing of nominal bore 15 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified.

Lagging to pipes of 20 mm bore plumbing all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh covering with POP layer, complete all as specified and directed at site by Engineer-in-Charge.

Bib tap, 15mm bore, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specifed.

Stop valves, cast copper alloy, 20mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specifed.

Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, complete all as specified.

PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified.

PVC connection 15mm dia, 600mm long with brass CP nuts and washers at both ends, complete all as specified.

Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified.

PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & directed.

PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & directed.

75mm bore PVC (SWR) junction double (double T ) equal or unequal, complete all as specified.

110mm bore PVC (SWR) junction single (Single T ) equal or unequal, complete all as specified.

75 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and as directed.

110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and as directed.

PVC (SWR) reducer of size 75mm bore, complete all as specified.

PVC (SWR) vent cowl of size 75mm bore, complete all as specified.

Concrete bed to drain pipes of bore 110mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including necessary formwork complete all as specified .

PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, dia of outlet 75mm, complete all as specified.

PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified.

Rotational moulded polyethylene water storage tanks of capacity 1000 ltrs, three layered (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm brass ball valve, high pressure with polythene float and flynut and wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed by Engr-in-Charge.

Supply only liquid water proofing compound as per latest IS specifications all as specified.

E/M items Point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts grade and including PVC conduit of suitable size ISI marked ( concealed wiring) (as per conducter run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet concealed in wall or on surface as per site requirement and making good disturbed surface of wall ,covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point/ fan point/exhaust fan/bell point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No. 80 above, but for one 3 pin socket outlet 5 Amp on the independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No. 80 above, but for one 3 pin socket outlet 5 Amp on the same board with other switches, complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item No. 80 above, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Sheet metal enclosure double door shutter type for DB’s SPN, 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete all as specified and as directed by the Engr-in-charge.

MCB SPN 32 Amps, 240 Volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

MCB single pole 6 to 32 Amps, 240 volts, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Switch piano flush button single pole one way 5 Amps, complete all as specified.

Socket outlet multipurpose 2 in 1, 3 pin, 5 Amp flush type, complete all as specified.

Switch piano flush button single pole one way 15 Amps complete, complete all as specified.

Socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, complete all as specified.

Stepped type electronic fan regulator flush type, complete all as specified.

Ceiling rose surface type, 65 mm x 50 mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block, complete all specified and as directed by the Engineer-in-Charge.

LED decorative ultra slim linear tube light 20 Watt including connecting using suitable wire complete all as specified and as directed by the Engineer-in-Charge Make: Cat Part No LHEXBHP7PN1W020 of Havells or equivalent of Bajaj/Crompton/Philips/Syska

Angular type Lamp holder PVC polycarbonate type with back plate and providing LED 9 Watt lamp complete all as specified and as directed at site. Make:- Crompton Cat Part No. LED-9WDF/CDL-BI or equivalent in Bajaj/Havells/Philips/ Syska/Wipro.

Supply, jointing, fixing or passing through pipe, trenches or ducts, commissioning and testing XLPE insulated screened and PVC sheathed armoured electric power LT cable heavy duty with aluminium conductor nominal cross sectional area 10 Sqmm 2 core for working voltage upto including 1100 volts confirming to IS-7098 (Part-I) 1988, complete all as specified and as directed.

GI pipe 25mm bore light grade with all fittings laid in trenches/wall/poles for cable protection, complete all as specified and directed.

Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cables,complete all as specified. Note :- Punned thickness shall be measured for payment purpose.

Sub class (B* brick, old size, brick covering laid dry, flat transversally along the length of cable on sand cushioning, with width equal to the length of the brick complete all as specified and directed.

Exhaust fan 250mm sweep single phase AC 220 Volts 50Hz supply PVC body with louvers and connecting including provn of 3 core flexible PVC insulated multi stranded copper conductor of size 0.50 Sqmm from ceiling rose/connector to fan, MS fixing brackets and other misc items required for fixing, complete all specified and as directed by the Engineer-in-Charge.

Ceiling fan 1200mm sweep electric driven single phase 240 Volt 50 Hz complete with blades and electronic regulator complete all as specified and as directed by the Engineer-in-Charge.

Electric water storage heater of capacity 50 Ltrs (ISI marked) with 4 star energy rating including CP connection, non return valve and pressure release arrangement including fixing arrangement for geyser with grouting of bolts of appropriate size including necessary clamps complete all as specified and as directed by the Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-charge.

M/S Nazir Enterprises

M/S A.M.Enterprises