SPL REPAIR TO BLDG NO P 475 COOK HOUSE AND DINNING HALL SR OF BATHROOM INCL TILING PAINTING AND PLUMBER WK IN BLDG NO T 362 SR TO P 11 UNDER AGE BR II AND AGE EM II OF GE 865 EWS

Amount

Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 but nexc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300X200x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.

M&L for Vitrified double charged tiles 10 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including ponting with admixture of pigment to mathc with shade of granite, over 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as directed by Engr-in-charge.

M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames complete all as directed by Engr-in-charge

All as per above item Ser No 8.00 but n'exc 1.50 sqm complete all as directed by Engr-in-charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

M&L for plain sheet glass 4.80mm thick ordinary quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

S&F in repair Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of up to 700 mm in width and weight not more than 35 Kg and fixed complete all as specified and directed.

M&L factory made single extruted WPC (wood polymer composite) solid door/ window / ceosetory windows and other frames / chowkhat of size 100x 65 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maxium toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full bodey threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being temite/ borer proof , water/ moisture proof and fire retardant and fixed in position with MS hold fast / lugs/ SS dash fasteners of required dia and length complete all as specified and directed. Note : (MS hold fast/ lugs or SS dash fasterners shall be paid for separately)

M&L factory made single extruted WPC (wood polymer composite) solid plain flush shutter of 30 mm size comprising of virgin of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maxium toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum, screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modules of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being temite/ borer proof , water/ moisture proof and fire retardant and fixed in position with MS hold fast / lugs/ SS dash fasteners of required dia and length complete all as specified and directed. Note : ( stainless steel butt hinges and necessary SS screws ahll be paid separately).

S&F IInd class soft wood as in plain solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints complete all as specified and directed.

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 35 mm thick 2nd class softwood,glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for 10 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and directed.

S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminum door handle cast type 150 mm in old or new position complete all as directed by Engr-in-charge.

S&F 100mm long mild steel medium weight but hinges cold rolled complete all as directed by Engr-in-charge.

Taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as directed by Engr-in-charge.

M&L rendering 15mm thick in cm 1:4 concrete or brick surfaces as in wall finishes even andsmooth w/o using extra cement complete all as specified and as directed

M&L rendering 15mm thick in cm 1:6 concrete or brick surfaces as in wall finishes even andsmooth w/o using extra cement and all as directed by Engneer-n Charge.

M&L for Preparing newly plastered surfaces of walls and applying two coats of acrylic emulsion paint over a coat of primer and over a coat of wall care putty applied till the surface is smooth etc complete all as specified and as directed.

M&L for Preparing old treated/untreated plastered surfaces of walls and applying two coats of synthetic enemal paind and a coat of wall care putty where required the surface is smooth complete all as specified and as directed.

M&L for Prepration of new plaster surface of wall and applying two coat of cement base paint over a coat of primer including balance area complete removale complete all as specified and as directed.

M&L to demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

M&L for dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern complete all as specified and as directed.

S&F 0.63 mm thick galvanised mild steel sheets with two corrugation side lap fixed with J or L hooks with grade of zink coating 275 complete all as specified and as directed.

S&F rolled section as in main and cross beams ,hip and jack rafters , purelins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe -410 Gde E-250 complete all as specified and as directed.

M&L for dismantling structural steel work including doors and gates of any description complete all as specified and as directed.

M&L for two coat of synthetic enamel paint on new /previous untreated corrugated steel surface including prepation over a coat of red oxide zinc chrome primer with modrant solution complete all as specified and directed .

S& F 1000 ltr capacity rotational moulded polythelene water storage tanks triple layer white colour (cylindrical vertical with clossed top) hoisted and fixed in position including dismantling of existing water tank of 1000 ltrs capacity all as specified in SSR Part 1 complete all as specified and directed .

S& F 500 ltr capacity rotational moulded polythelene water storage tanks triple layer white colour (cylindrical vertical with clossed top) hoisted and fixed in position including dismantling all as specified in SSR Part 1 complete all as specified and directed .

M&L for taking up or down steel tubing 20mm bore including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store complete all as specified.

S&F 20mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

S&F 32mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified.

S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors complete all as specified.

All as per Ser No 46 here in above but fixed to wall.

S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified

All as per Ser No 47 here in above but fixed to wall.

S&f 75mm bore PVC (SWR) pipe bends any radius complete all as specified.

S&F PVC (SWR) 110mm bore bends any radius, complete all as specified .

S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal completer all as specified.

S&F PVC (SWR) 75mm borebranch piece single 'Y' equal or unequal complete all as specified

S&F PVC (SWR) 110mm borebranch piece single 'Y' equal or unequal complete all as specified

M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement completer all as specified.

S&F PVC (SWR) 75mm bore vent cowl complete all as specified

S&F PVC (SWR) 'S' trap 110mm bore for EWC/IWC complete all as specified.

S&F viterous China squatting pan or Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with p.c.c type B-I 1:2:4 , using 20 mm graded crushed stone aggregate complete all as specified.

S&F in repairs viterous China wash down water closet pan (pedestal pattern white) (excluding flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe complete all as specified

S&F in repair single piece china wash down water closet , with UF soft close seat cover, hinges, accessories set, cistern fittings size 370x690x795mm Make: jaquar Cat No. KUSWHT-358515N or equivalant in cera/ hindware/ Kohler complete all as specified and directed.

S&F in repairs for viterous china wash hand basin flat back size 600x480mm excluding traps, waste , chain , plug and porcelain stopper incl brackets,complete all as specified.

S&F in repairs 20mm bore bib taps fancey type chromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. (Minm wt 350 Gms) complete all as specified.

S&F in repairs 20mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule complete all as specified.

S&F in repair piller taps 20 mm bore of cast copper alloy chromimum plated screwed down high pressure, hot aor cold long screwed shank fly nuts screwed to PP-R Pipesof any description complete all as specified and directed by Engr-in-Charge.

S&F wash hand basin table top type fixed on granite top grooving and cutting if required complete all as specified and directed Make: Jaquar cat No SLS WHT-6011 or equivalent in cera/ hindware/ Kohler complete all as specified.

S&F in repair pillar tap single lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. Make Jaquar Cat No. ARI 39005B or equivalent in cera/ hindware/ Kohler complete all as specified.

S&F in repair hand shower ( health faucet ) CP with 8 mm dia. 1.2 Metre long flexible tube and wall hook complete all a specified and directed. (Make : Jaquar Cat No. ALD-573) in cera/ hindware/ Kohler complete all as specified.

S&F in repair chromium plated paper holder fixed on walls complete all as specified and directed. (Make: Jaquar Cat No: AKP-CHR-35753P) in cera/ hindware/ Kohler complete all as specified.

S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed. (Make: Jaquar Cat No: ARI-39053) in cera/ hindware/ Kohler complete all as specified.

S&F in repair chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed (Make: Jaquar Cat No: ARI-39037) in cera/ hindware/ Kohler complete all as specified.

S&F glass shelf corner fixed on walls with screws complete all as specified and directed (Make: Jaquar Cat No: ACN-1173) in cera/ hindware/ Kohler complete all as specified.

S&F towel rack chromium plated brass fixed to walls with screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35781PS) in cera/ hindware/ Kohler complete all as specified.

S&F CP brass towel ring fixed with and incl CP brass screws and complete all a specified and directed (Make: Jaquar Cat No: AQN-7721) in cera/ hindware/ Kohler complete all as specified.

S&F Soap dish fixed with and incl CP brass screws complete all a specified and directed (Make: Jaquar Cat No: AKN-35731P) in cera/ hindware/ Kohler complete all as specified.

S&F chromimum plated brass 32 mm coupling for table top wash hand basin half or full thread fixed complete all as specified and directed. (Make: Jaquar Cat No. ALD-725) in cera/ hindware/ Kohler complete all as specified.

S&F PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed. (Make: Jaquar Cat No. ALD-8058) complete all as specified.

S&F Harrision rails, anodised alloy, with fixing end brackets, stops, dooms etc complete set fixed on wall or wall pannels complete all as specified and directed by Engr-in-Charge.

S&F Grating doom 125 mm with waste hole of PTMT

S&F Tubular towel rail, 20mm dia, 600 mm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs (fixed in repair),complete all as spfd and directed by Engr-in-charge.

S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations complete all as specified.

M&L Demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for precast cement concrete block masonary type C-1 , using crushed stone 20mm graded aggregate ,set and jointed in cement martar 1:6 complete all as specified.

S&F in repairs Sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing contilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm, complete all as specified.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified.

S& F in repair 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified.

S&F in repairs 20 mm PPR gate valve conforming to ISO 2000 screw down end for PPR pipe or for union and fixed complete all as specified.

S&F in repairs PPR 25 mm gate valve conforming to ISO 2000 screw down end for PPR pipe or for union and fixed , complete all as specified.

All as per Ser No 87 here in above but 32 mm dia bore.

S&F in repairs PP-R Ball valves 25 mm(brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 20mm bore, complete all as specified.

S & F shower rose with shower arm 400x 25x25mm square shape for wall mounted showers with flange (fixed in repair) Cat No. SHA-455L400 of make Jaquar, complete all as specified and as directed.

S&F18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws as in modular kitchen cabinets/cupboards including lipping portion match with laminated colour complete all as specified and directed.

S&F 100mm long extruded brass handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.

S&F 30mm width of flaps(when open) continous (piano) hinges, brass complete all as specified and directed.

S&F magnetic catcher with 8mm dia ball and brass body and stricking plate complete all as specified and directed.

S&F kitchen plate rack made of stainless steel 0.80 thick sheet, standard size 900 x 900 x 250 mm and design as approved and gixed to wall with wooden plug and screw, (Fixed in repair), complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polisihin (grade finish) and exposed edges of kota stone shall be rounded including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old decorated wooden surfaces including preparation complete all as specified and directed.

All as per Sert item No 100 herein above but steel surfacess including roof sheeting.

M&L for dismantling unframed timber scantling under 40 sqcm in section , in fillets, rails. Posts, rafters, purlins etc any position complete all as specified and directed.

M&L for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section complete all as specified and directed.

S&F for 18/19 mm thick block board grade 2 quality interior grade commercial type fixed with screws to timber frame work complete all as specified and directed.

M&L for plain fillets squar rectanglular of triangular in sectiion clean sawn secured with nails of brads complete all as specified and directed.

S&F for cast brass fanlight pivot and catches with plate size 25mm x 65mm and suitable for shutter of 30mm thickness complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished finished complete all as specified and directed.

S&F 40mm width continuous (piano) hinges, mild steel , bright finish or electrogalvanished complete all as specified and directed.

S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steell spring , fixed in floor complete all as specified and directed.

M&L for one coat of oil bound distamper on old decorated surfaces of walls incl preparatio complete all as specified and directed.

M&L for hacking out old broken glasses (any thickness, size quality, description) from wooden or steel frames fixed with putt or wooden beads complete all as specified and directed.

S&F 3mm thick glass sheet any size oridinary quality in steel or wooden frames n exc 5 Sqm complete with fixing materials such as putty glazing pins wooden beads etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for repair of stop valves, fancy type, chromium plated woth long shank and cup (angle valve type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm stop complete all as specified and directed.

S&F ball valves, high pressure of PTMT wutg epoxy coated aluminium rod and high density platic ball screwed for iron pipe and fixed (minium weight 210 gms) of bore of pipe 15mm complete all as specified and directed.

S&F in repair PVC connection 15mm size woth PTMT nuts of length 600 mm complete all as specified.

S&F in repair Grating doom 100 mm dia of PTMT (minium weight 25 gms) complete all as specified.

S&F Viterous china wash basin, white flat back size 550 x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but excluding of fixing of waste pipe fixed in repairs complete, all as specified and as directed by Engr-in-Charge.

Supply and fixing waste fittings, brass chromium plated for glazed waste basins etc with lng screwed shanks and fly nuts, flange end beaded in red lead cement and other end fixed of bore of pipe 32mm all as specified and as directed by Engr-in-Charge.

S&F Pillar taps, cast copper aloy, with capstan heads, chromuim plated, screwed down high pressure with or without lettered "hot or cold with long screwed shanks and fly nuts screwed for irom pipe 15mm fixed all as specified and as directed by Engr-in-Charge.

S&F in repair sheet glass shelf assemble consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromuim plated bracket gurad and railing 60 cm long as directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including 125 x 60 mm necessary fixing lungs, hinges lock strike plate etc as directed by Engr-in-Charge.

S&F flush shutters 30mm thick, solid core construction with block board core and plywood face panels, commercial type on both side as directed by Engr-in-Charge.

M&L for preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously intreated wooden surfaces and applying two coats of synthetic enamel paint of ver a coat of pink primer complete all as specified and directed,

S&F 300mm aluminium alloy, anodized , sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruted section and fixing blots and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed,

S&F aluminium handles, 150mm fabricated type anodised complete all as specified and directed,

M&L PVC (SWR) gully trap 125/110 mm setting and jointing with slovent cement complete all as specified and directed.

M&L soakage well of 3.0 mtr internal dia a top and min 1.80 mtr dia at bottom having min 2.45 mtr heihgt of 380mm thick random rubble uncoaoursed stone masonary wall in cm 1:6 with 150mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) below stone masonry at bottom and RCC slab using design mix M-25 with reinforcement 10mm dia bares @ 150mm C/C bothways cranked at 1/4 th of span including arrangement for manhole opening and manhole cover, inlet for 100/150mm dia pipe and rest all as specified as per Drg No CESZ/TD-1078/2011 sheet 1/1. Note : The rate includes excavation in hard/ dense soil and constructio of soakage well as per drawing, connection of inlt pipe, 100 mm dia PVC cent pipe with cowl, returning filling and removing of surplus soil to a distance exc 50 mtr but n.exc 100 mtr from site. For any disputed issue regarding drawing decision of Engr-in-Charge shall be final and binding for execution.

M&L for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. in hard / dense soil all as specified and directed by Engr-in-Charge.

M&L for Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as specified.

M&L for Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as specified.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in mass-concree/ foundation or floor complete all as specified.

M&L for cement concrete bed to drain pipe incl packing under haunching against the sides of pipes after thery are laid tested in 1:4:8 type D2 (using 40mm graded stone aggregate) of bore of piep 300mm complete all as specified.

S&F 300 mm dia bore (inner dia) double wall corrugated HDPE pipe (SN-8) in any length including all fitting and jointing with eastomeric rubber link and cuppler/ other jointing material laid in trenches are in floors complete all as specified.

M&L precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate ) block masonry with blocks exc 10 cm in width and setting in CM 1:6 complete all as specified.

S&F for 1:2:4 type B-1 (20mm graded stone aggregate) cement concrete in surface channels and drains complete all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L pre-cae cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in manhole cover slabs set in cement mortar 1:6 including necessary forwork complete all as specified.

S&F Galvanised mild steeel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or glavanised wire staples complete all as specified.

M&L for taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors etc to match the existing surface all as spfd and directed by Engr-in-Charge.

M&L for Point wiring with copper conductor FRLS cable multistrand, single core 1.5 Sqmm size for one light point or bell point/ Ex fan point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls / ceiling including rectangular PVC board heavy duty type for mounting switches/ sockets etc as specified and directed.

All as per item No 140.00 but for 5 Amps socket outlet in same board with 1.5 Sqmm cable complete all as specified and directed by Engr-In-Charge.

All as per item No 140.00 but for 5 Amps socket combination in independent board with 1.5 Sqmm cable complete all as specified and directed by Engr-in-Charge.

All as per item No 140.00 but for Bell point, with cables 1.5 sqmm complete all as specified and directed by Engr-in-Charge.

All as per item No 140.00 but for power point 3 pin switch socket 15 Amp wutg PVC copper conductor cable FRLS multistrand unsheathed 2.5 sqmm on independent board incl one run 2.5 sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl PVC box 2 mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Supply and fixing in replacement of switch Socket combination out let multi purpose 2 in 1, 3 pin, 5 Amps and 15 Amps flush type universal complete all as directed.

Supply and fixing in replacement of switch Socket combination out let multi purpose 5 Amps 2/3 pin complete all as directed.

S&F One switch socket outlet 5 Amps, 2/3 pin complete all as directed.

S&F in replacement of electrical bell (multi music type), AC, 230 Volts complete all as directed.

S&F in replacement of electrical bell push flush type 5 amp complete all as directed.

S&F in fix as in repair decorative durable LED batten fitting 18 watt, 4 feet long with decorative and caps, power coated CRCA decorative of LED type 1 X 18 W LED including LED retrofit, 4 feet long (White colour) tube of 18 watt having driver, connector block etc complete withh all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete all as directed.

S&F 2'x2' Recess mounting low depth white LED luminaries white powder coated VRVA sheet housing LEDs front frame with translucent cover fixed to the housing fixed in front frame 36w LED extruded alluminimum heat sink projected in false ceiling complete all as directed.

S&F 1'x1 surface mounting square shaped LED sonwlighter with durable housing with AI heat sink with diffuser to give glare free light with removable driver 18W LED complete all as directed.

Supply and fixing in replacement of old U/S LED mirror light fitting 7 watt 230 volts box type, with standard specification etc warm white colour complete confirming to crompton cat part No LCL-07-CDL complete all as directed.

Supply and fixing in replacement of old U/s LED 7 watt, 230 volts 50 Hz AC complete all as directed.

Supply and fixing in replacement of decorative wall mounting chrome finish 3 watt LED 6000K light fitting including LED lamp (Bed light) complete all as directed.

M&L for ceiling rose bakelite 60x50 mm two to three terminals complete all as directed.

M&L for lamp holder PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and fix in replacement of of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accossories such as safety, thermostate NRV , connection piece etc all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete as directed.

Supply and fix in replacement of sheet metal enclosure with socket plug top and MCBs single pole & earth enclosure with a 3 pin and earth plugh and socket complete with one MCB 20 Amps single phase complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of any size and provide new sheet metal distribution board iron clad, VTPN, double dooe with IP-54 1K-09, 08 ways , protection suitable for MCCBs as incomer and MCBs as outgoing 415 Volts 3 Phase 50 C/S 4 way, compklete with appripriate size copper Bus bar and netrural ling confirming complete with one MCCB 4 pole 415 volts 125 amp ratins as incomer, thermal magnetic with ruptyring vap 16 KA of the same make as of distribtuion board and including cutting chases towall for fixing DB and making good the disturbed wall surface att as reqd at site including testing complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing in replacement of old UNSV sheet metal enclosure TPN for DBs with 200 amps bas bar of 12 way 240 volts with blank plate double door all as directed by Engr-in-Charge.

Supply and fixing in replacement of old UNSV sheet metal enclosure SPN for DBs with 200 amps bas bar of 12 way 240 volts with blank plate double door all as directed by Engr-in-Charge.

Supply and fix in replacement of old U/S MCB single phase (SP), 6 to 32 amps 240 volts C Curve complete all as specified and directed by Engr-in-Charge.

S&F in replacement of old MCB SPN, C-Curve, 230 volt 63 amp 10 KA complete all as specified and directed.

S&F in replacement of old MCB SPN, C-Curve, 230 volt 40 amp 10 KA complete all as specified and directed.

S&F in replacement 415V 10KA 'B' curve miniature circuit breaker (MCB) of 100 amps current carrying capacity TPN in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F Sub main wiring with two run of 6 Sqmm (2x 6 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x 6 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x 6 Sqmm), one run of 6 Sqmm (1x6 Sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F Sub main wiring with two run of 10 Sqmm (2x 10 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 10 Sqmm (1x 10 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 10 Sqmm (2x 10 Sqmm), one run of 10 Sqmm (1x 10 Sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insualting hangers not more than 1 metre apart including 4mm suspension wire, from pole/LT distribtion panel to DB specified above, on twin core cable flat ofr circular of size 16 Sqmm all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cmx 6.30mm thick buried directly in ground to a depth not less than 2.25 mtr with top edge not less than 1.5 mtr below GL connected to and including GI earth wire 4mm dia and GI pipe 15 mm dia light grade pipe for earthing protection to the extend of mx 7.5 mtr connected o the plate by mean of GI nut, bolts, washers and further to tesh point by provn of charcoal salt etc complete with all as per SSR Part I electrical plate No -05 PCC chamber in PCC 1:3:6 type C-2 frame cover MS funnel GI watering pipe including earth work for excavation and removal of surplus soil complete all as specified and directed by Engr-in-Charge.

Supply, laying , jointing and testing LT under ground cable heavy duty 1100 volts grade PVC insulated steel wire or tape armoured and overll PVC sheatehed of size 35 Sqmm 3.5 core laid in trenches / pole/ loop including brass teminal lugs etc completed all as specified and directed by Engr-in-Charge.

M/S SHAMSHER ALI SUFI

SAFFRON CONSTRUCTION CO.