Special repair of Sub Health Centre at village Sirhol and Urban Health Centre at village Sukhrali. (RECALL)

Amount

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc(HSR 13.13)

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing In cement(HSR 8.5 b)

Providing & fixing vitrified tiles of size 600mm X 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO(HSR 14.89) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material(HSR 14.89)

Providing & fixing vitrified tiles of size 600mm X 600mm of approved make in skirting/dados laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO(HSR 14.89) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material(HSR 14.90)

Providing & fixing Ist quality ceramic glazed wall tilesconfirming to IS 15622 (thickness to be specified by manufacturer)of approved make in all colors,shade except burgundy,bottlegreen,black of any size as approved by engineer-In Charge in skirting ,risers of steps and dados over12mm thick bed of cement mortor 1:3 coarse and jointed with grey cement slurry,including pointing in white cement mixed with pigment to match the shade complete. Size of ceramic Glazed tiles 300mm X 450mm(HSR 14.92 b) Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO(HSR 14.89) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Providing & fixing ceramic tiles/ anty skid tile of size 400mm X 400mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT Bell, JONSONS , RAK & SIMPOLO(HSR 14.89) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material(HSR 14.91)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling.(HSR 14.1)

Screed of 40 mm thick lime concrete 1:2:8 to be laid below the topping(HSR 14.7)

Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (Note:- Reputed make Tile only ISI Marked will be used as approved by Engineer-in-Charge). (HSR 14.45) Note:- The agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall(HSR 15.12)

12 mm thick cement plaster 1:6(HSR 15.7)

Cement pointing 1:2 flush on flat brick flooring.(HSR 15.71)

Providing & fixing PVC Rain water pipe 6 Kg Pressure of ISI Mark in cement mortor during masonery work. 100MM dia PVC pipe 6Kg. Pressure(HSR 13.89a)

Providing & fixing PVC Rain water pipe 6 Kg Pressure of ISI Mark in cement mortor during masonery work. 150MM dia PVC pipe 6Kg. Pressure(HSR 13.89b)

Providing & fixing PVC Bend ISI Mark 100MM dia PVC pipe 6Kg. Pressure(HSR 13.90a)

Providing & fixing PVC Bend ISI Mark 150MM dia PVC pipe 6Kg. Pressure(HSR 13.90b)

Providing and fixing commercial type block Board, plain lining, butt jointed, including Wooden plugs (teak) placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall bepayable extra)- 19mm thick (HSR 17.49b)

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/mate of thick 1.0mm as per DSR 9.127.2

Supplying and fixing glass panes with Deodar wood moulding- 4 mm thick (glazing area above 55 sq dm, but upto 84 sq dm of each pane)(HSR 17.24 c)

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy annd chaplash, etc. (non coniferous timber other teak conforming to I.S specification no. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc. complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (i) 30 mm thick (HSR 17.92 (i) - Note I under 17.18

Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- as per HSR 17.93 a iii. (Note) :- Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges. (Duro, Green) 35 mm. Thick (HSR 17.93a iii- note I under 17.18))

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate(HSR 18.34b)

Supplying and fixing glass panes including special metal sash putty of approved make glass panes 4 mm thick, exceeding 40 sq dm areas.(HSR 18.30 b)

CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating Size 450 mm x 450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 40 kg with C.C. topping )(HSR 29.84a)

Factory manufactured paneled and glazed door shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., c(non –coniferous timber other than team, conforming to I.S specification no. 1003 kiln seasoned), with 100 mm wide vertion 35mm thick (HSR 17.91 b) note I under 17.18))

Factory manufactured paneled and glazed door shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., c(non –coniferous timber other than team, conforming to I.S specification no. 1003 kiln seasoned), with 100 mm wide vertion 30mm thick (HSR 17.91 i) note I under 17.18))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUITE, SYPHONIC TYPE, Consisting of- Single trap symphonic W.C. Suite white (HSR 30.5a-i)

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid. White plastic seat (Solid)(HSR 30.13 i)

PROVIDING AND FIXING IN POSITION BESTINDIA MAKE LARGE FLAT BACK or Angular lipped from Urinal 610 MM HIGH consisting of: Flat back lipped or angular urinal basin or VITREOUS CHINAWARE; (to the approval of the Engineer-in-charge)(HSR 30.25 i)

PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; Size 550 mm x 400 mm with one no. tap(HSR 30.41 iv)

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE. 600 mm x 450 mm x 200 mm(HSR 30.53a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE PAPER HOLDERS FIXED INTO wall with C.P Brass screws complete in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. C.P brass(HSR 30.67a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. 25 MM DIA C.P BRASS ADJUSTABLE75mm long(HSR 30.68 a-i)

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWL PLUGS WITH C.P BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. With C.P brass brackets and guard rail 600 mm x 125 mm(HSR 30.69a-i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRRON Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or c INDIAN MAKE 600mmx450mm (HSR 30.71 a-i)

Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Bib cock long body(HSR 30.75a)

Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Bib cock (HSR 30.75c)

Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) 15 MM STOP COCK Stop cock male and female end(HSR 30.76a-i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION C.P Brass 15 mm x 450 mm(HSR 30.82 b-iii)

Providing and fixing HDPE water storage tanks of sintex, Diplast, O.K. supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing Iin position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer.(HSR-30.119) 1000 Ltr.

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinthlevel.(HSR 11.7)

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost (HSR 18.12)

Providing and fixing concertina wire fencing having 600mm dia with wire dia 2.5mm thickness with zinc coating having bar length 11mm & width 17mm having spcing 24mm placed at every 2.5 meter to 3 meter apart embedded in pvaement concrete blocks with binding wire by providing coats including drilling holes in the cost complete (Excluding cost of posts, structs, earthmark & concrete which is payable extra (N.S)

Providing and fixing Fiber Sheet of reputed manufactures Complete in all respect (N.S) (3mm) Note:- The agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge)(HSR 16.24)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work.(Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge)(HSR-16.60)

Distempering with washable oil bound distemper (of approved manufacture) one coats on old distempered work.. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.59).

Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). [HSR 16.79 (b)].

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

Scraping--White wash and colour wash (HSR 8.32) a

Dismantling white or coloured glazed tiles (HSR 8.38)

Painting one coat with synthetic enamel Paint in all shades on old wood-work, or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Note:- First quality paint/primer of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.7).

Cost of aluminium fitting cokmplte for doors and windows, such as tower bolts, handles, etc., and screws for these fittings (excluding sliding bolt)- for single lead shutter(HSR 17.72a)

Providing and fixing sliding bolt with nuts and screws etc. complete- aluminium- size 300 mm x 16 mm(HSR 17.83b-i)

Cement concrete 1:2:4 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified.(HSR 13.64)

Dismantling Roofing demolishing mud phaska in tile terracing.(HSR 8.8g)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore(DSR 18.10.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore(DSR 18.10.2)

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around(HSR 6.6)

Cement concrete 1 : 8 : 16 with stone aggregate 40 mm Nominal sie in foundation and plinth(HSR 10.28)

First class brick work laid in cement sand mortar 1:6 in foundation and plinth(HSR 11.2)

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 kg per sqm laid hot and sanded.(HSR 10.114)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving door and window frame of size 114 mm X 50 mm with 40 mm wide double rebate.(HSR 18.34 d)

10 mm thick cement plaster 1:4(HSR 15.52)

Cement concrete 1:1 1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in posi(HSR 10.82+10.95a)

Cement concrete 1:1 1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding st(HSR 10.86+10.95a)

Steel reinforcement TMT steel bar FE-550 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate ofRCC including stairghtening, bending, binding, wastage, overlaps, welded joints, spacer, bars, chairs, stays, hangers and annealed steel wire etc.and placing in position complete in all respect for all heights/depts/story/basement etc. (HSR-18.22) (Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. From the length so measured, the weight of reinforcement shall be calculated in tones on the basis of IS:1732.Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement).

Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16(HSR 13.50)

Khurra on roof as per item No. 13.50 with A.C spouts and fixing in position.(HSR 13.52)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc.(HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR: 16.3)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work.(HSR 16.58)

PROVIDING AND FIXING IN POSITOIN BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for Sinking into floor, with raised foot treads COMPLETE WITH 100 MM H.C.I, ‘P’ TRAP with or without vent as re Size 580 mm white (HSR 30.2a-i)

EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY C.I. LOW DOWN CISTERN flush bend and all other necessary fittings instead of 12.5 litres capacity high level C.I. flushing cistern with flush pipe complete (as approved (HSR 30.9)

Recovery Items:-Bidder have to quote rate for recovery items at least or more than reserve price. The rate quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency.T Note:- The reserve rate/amount is minimum amount to be used as base for quoted purchase rate by the agency. No rates/amount below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.-- Door @ 150 Each

Tiles @ 4.50 Each

Brick Bats @ 400 Per cum Note:- In Case of any difference in the DNIT & Nomenclature of any of HSR Items of Civil, PH Work Depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable