REPAIR TO FLOORING, TILING AND JOINERY AT CERTAIN SMQs IN AKASH VIHAR AT AF STN UNDER GE AF GORAKHPUR.

Amount

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame but exc 1.50 Sqm and n.exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Resecuring or easing & adjusting without taking of shutters of any description area exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S & F factory made pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 125 x 60 mm.including holdfast filling in chowkhats complete all as specified and directed.

S & F factory made pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm.including holdfast filling in chowkhats complete all as specified and directed.

M&L factory made second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/gauge etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I(2009) complete all as specified and directed.

S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.

S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010 complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F 75mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F in repairs 100 mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F in repairs 75 mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F Aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified.

S&F in repairs Aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified.

S&F 150 mm long Aluminium anodized barrel tower bolt, complete all as specified.

S&F in repairs 150 mm long Aluminium anodized barrel tower bolt, complete all as specified.

S&F in repair 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repairs galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples fixed in wooden/steel frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or escription) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old galzing pins/springs clops and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty in square n. exc 0.5 sqm in each pane.complete all as specified and directed.

S&F in repair mortice lock of mild steel vertical type of size 150mm with 4 levers fixed to wooden/ aluminum doors complete all as specified and directed.

S&F in repair 1st class hardwood beads, straight (any size), for glazed or gauzed joinery, including renewal, forming mitres, fixing with nails/screws, and making good the surfaces, complete all as specified and as directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair two (double) legged floor door stopper of aluminium body and tongues anodised with hard drawer steel spring with rubber fixed to door 150mm complete all as specified and directed.

S&F in repair aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F 300 mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and as directed.

S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and as directed.

M&L powder coated aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x1.5mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed .

M&L anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 1.5 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with ACP panel in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

S&F in repair 20 mm dia Harrison rails/curtain rod, chromium plated with fixing brackets, stops, rollers,end ball& round block etc complete all as specified and directed.

S&F in repair 18 mm thick HDHMR (High density high moisture resistance) board of grade1 quality make:Green Ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finsih mica of appoved quality make:- Century or as approved by GE Fixed with screws, slovent cement/adhesive to make cupboard shutters, sides, top, bottom, shelves inside the cabinet shutter or drawer including piano hinges and magnetic catcher,knobs complete all as specified and directed.

S&F in repair rubber door brush seal, including cutting, fixing with screws/adhesive as required, ensuring uniform contact with floor/threshold, complete all as specified and as directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid WPC @ 3% of qty of cement or as per manufacturer instructions ( WPC will be measured and paid separately), finished even and smooth without using extra cement with necessary scaffloding complete all as specified as directed

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement with necessary scaffloding complete all as specified as directed.

M&L Rendering 5mm thick in CM 1:3 on celing, finished even and smooth in ceiling without using extra cement with necessary scaffloding. complete all as specified as directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat alkali resistant primer complete all as specified and as directed by Engr-in-Charge. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.

M & L for prepartion of new plasterred surfaces of wall and applying two coat of oil bond distermper over a coat of over a coat alkali resistant primer including 2 mm thick wall care putty with necessary scaffloding complete all specified and directed

M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash with necessary scaffloding complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.09 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 300x450mm x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

ditto as above but in skirting/dado etc over 10 mm thick Cement plaster 1:4 complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removing from site complete all as directed.

Taking up or down steel tubing and connections 20mm bore including cleaning for refixing or removing from site complete all as directed.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

S&F 20mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 15mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 20mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.

S&F in repair EWC. wash down water closet pan white excl. flushing cistern & flush pipe incl. plastic water closet seat cover closed pattern with flat bottom and cover and hinging device as per manufacturer instruction incl. connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc.complete all as specified and directed.

S&F in repairs Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite the surface including dismantling complete all as specified and directed.

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in copings complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.

M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface complete all as specified and directed

M&L 50 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface complete all as specified and directed

M&L Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20 mm thick cement screed bed in CM 1:6 etc complete all as specified and as directed.

M&L 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.

M&L for 60mm thick factory made cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L 75mm thick cement concrete (1:3:6) type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection and path laid in panels not more than 3.0 mtr in lenght laid to slope 1:30 including forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 Parts of sand) surface,complete all as specified and directed. (Note:- The quoted tates are deemed to be inclusive of material against work and joints fillings.)

M/s Pandey Trading Company (BID ID -3516308)

M/S SHRI RC YADAV (BID ID -3516094)

M/s Vivek Traders (BID ID -3516628)

PAWAN GARG (BID ID -3516328)

M/S EASTERN TECHNOCRAFTS (BID ID -3516453)

H AND Y GROUP (BID ID -3516145)

M/S RAM AWADH SINGH (BID ID -3516112)