SPECIAL REPAIRS TO BLDG NO NP-1 MAIN FIRE STN AND BLDG NO T 44 NISSAN HUT AT ME LINES OF OD TALEGAON UNDER GE DEHU ROAD

Amount

Dismantling wall & floor tiles, incl cement mortar bedding (but not backing) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc any type on any surfaces complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated. Etc) sheet in roof covering complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge , thickness, including nainital or similar pattern in roof covering complete all as specified and directed.

Dismantling timber scantling area 40 sqcm and over in section, in any position unframed work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets any thickness including cover fillets complete all as specified and directed.

Dismantling timber in fillets, rafters, purlins etc under 40 sqcm in section unframed work complete all as specified and directed.

Taking down steel tubing galvanised with connections of dia 15 mm complete all as specified and directed.

-do- all as per item no 8 but 20mm dia complete all as specified and directed.

Taking down chowkats or frame with shutter (w/o taking off shutter from the frame) of area not exc 1.5 Sq.m each complete all as specified and directed.

-do- all as per item No.10 above area exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300mm x 450mm x 6 to 7 mm thick as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat of 10mm thick in CM 1:4 finished even and fair to receive tiles all as direced.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles excedding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles incl 10mm thick CM (1:6) screed bed to receive tiles all as specified and directed

M & L for non skid coloured ceremic tles 7 to 8 mm thick area of each tiles exceeding 0.18 sq.m but not exc. 38 sq.m , in floors, etc.set and jointed in cement slurry and pointed in white or coloured cement to match. Including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L for polished 20-25 mm thick machine cut cudappa stone slab set jointed with grey cement & pointed with pigment to match the shade of slab including rubbing & polishing at any position,Including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including rounding edges of sides, pointing in white cement (1:2) using marble dust with admixture of pigment to match the sahde of granite complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 sqm on plan and exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L Pre-cast cement concrete block type C-1 1:3:6 (using 20mm graded stone aggregate) masonary with solid blocks exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed.

M&L for rendring 10mm thick in CM 1:6 on fair faces of brick/ concrete surface is to be finished even and smooth (without using extra cement ) with thin layer of sagol complete all as specified and directed.

M&L for rendering 15mm thick in two layers (10+5mm) cement plaster on concrete/ brick surfaces in CM 1:4 and finished top surfaces even and smooth without using extra cement with water proofing compound complete all as specified and directed.

M&L two coats of cement based paint on new wall surfaces with preparation of new or undecorated surfaces wall with alkeli resistant priming paint etc complete all as specified and directed.

M/L for two coat of OBD over a coat of wall putty on new surfaces of wall including ncessary preparation of new surfaces etc complete all as specified and directed.

S & F 0.5 mm thick pre painted galvalum Al zinc coating GI based corrugated steel sheet of any colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

S & F 0.5 mm thick pre painted galvalum Al zinc coating GI based plain steel sheet of any colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L roof trusses (framed), trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle, chanel or flat sections) including distance pieces, cleats etc Fe-410 W (Gde E-250) complete all as specified and directed.

M&L for rolled section of mild steel as in main and cross beam hip and jack rafter, purlins confirming to grade Fe 410-S where connected to common rafters and running rails nd guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed.

S&F 12mm dia mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 CM long complete all as specified and directed.

M&L for Providing cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) in roof kerbs or mud stone or bed block complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, beams complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (Using 20mm graded stone aggregate)as in lintel, beam complete all as specified and directed.

M&L mild steel bars 10mm dia and over, cut to length, bent to shape, required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) complete all as specified and directed.

All as per item No 32 but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed.

S & F 15 mm dia GI pipes medium grade with all fitting & fixed to wall / floor complete all as specified and directed.

-ditto- all as per item No. 34 above but fixing only complete all as specified and directed.

-ditto- all as per item No. 34 above but 20mm complete all as specified and directed.

-ditto- all as per item No. 36 above but fixing only complete all as specified and directed..

S&F anodised aluminium snap grid frame works 605x605mm frame works for flat/sloping ceiling aluminium grid work 35.60x23.60x1.60mm main and Tee 23.6x23.6x1.6mm cross complete fixed with 6mm MS rod in roof and ceiling all as specified and directed.

M & L for 09 mm thick printed decorative accustive board for insulation and accustic purpose 60 x 60 cm to size fixed in ceiling to snap grid frame work complete all as specified and directed.

M & L for 0.71 mm thick plain aluminium sheeting, alloy 31000 H4 of size 60 x 60 cm to fixed in ceiling to snap grid frame work complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa pattern" size 580x 440mm white including integral foot rest with provn of fime concrete bedding & jointing to flush pipe & socket of WC including 'P' or 'S' trap complete all as specified and directed.

S&F in repairs viterous china white wash basin flat back or size 550 x 400mm and incl brackets , wast coupling of PTMT (half or full threaded) 32mm dia and PVC connection 15mm dia x 450mm long with LDPE pipe of pressure rating 6 kgf/sqcm complete all as specified and directed.

S&F in repairs vitreous China urinals half stall urinal (back or corner wall type), complete inlcuding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including urinal spreader of PTMT any colour for fixing with 15mm dia pipe, PVC connection 15mm x 600mm long, waste coupling of PTMT (Half or full threaded) 40mm dia complete all as specified and directed.

S&F in repairs 15mm dia pillar taps cast copper alloy with capston head chromium plated screwed down high pressure wlth or without letter "Hot" or "cold" with long screwed shanks and flynuts complete all as specified and directed.

S & F in repairs 15 mm dia bib taps chromium plated fancy type , screwed down for iron pipes or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm dia stop valves fancy type , chromium plated with long shank and cup (concealed type) ,screwed high pressure with crutch or butterfly handles screwed both ends for iron pipe etc complete all as specified and directed.

S& F in repairs PVC flushing cistern white colour of 10 ltr capacity with inlet, ball valve, lever & bracktes etc complete all as specified and directed.

S&F in repair cabinate mirror cupboard pattern of size 450x350mm regular size with mirror and PVC shelves complete all as specified and directed by Engr-in-Charge.

S & F in repairs chromium plasted brass tubular towel rail, 20 mm D type 60 cm long between flanges complete all as specified and directed.

S & F in repairs 75 mm dia outlet long arm cast iron nahani trap with grating incl jointing to waste pipe fixed in cement concrete etc complete all as specified and directed.

Taking down PVC (SWR) pipe 75/110mm dia including fitting complete all as specified and directed.

S & F PVC (SWR) pipes single sockated in any length with rubber ring joints fixed on walls dia 110 mm complete all as specified and directed.

-ditto- all as per item No.52 above but 75 mm dia complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia with acess door complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S/F factory made solid PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS ltubes for top and bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' chanel having a PVC sheet strips PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail. Panelling and plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates incl necessary fixing lugs hinges lock strike plates exc size or frame 105 x 60mm complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone agg) as in door frame filling complete all as specified and directed.

S&F 30 mm thick flush shutter solid core construction with block board corre & plywood face pannels commercial type on both sides complete all as specified and directed.

M&L for painting to wooden surfaces with two coats of synthetic enamel paints wlith pink primer and preparation of surfaces etc complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) fixing 300mm long complete all as specified and directed.

S/F 200mm length Aluminium anodised barrel tower bolt complete all as specified and directed.

S/F Aluminium handles fabricated type anodised 150mm size complete all as specified and directed.

S&F anodised aluminium frame powder coating (minimun thickness of powder coating 50 micron) coated for doors, window, ventilators powder coated with one or more rebates including joining cleat for fixing etc, complete all as specified

S&F anodised powder (minimun thickness of powder coating 50 micron) coated aluminium window and ventilator shutter, fixed type without sash bar, aluminium section weighting not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neorene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified

S & F 4.8 mm thick sheet glass ordinery quality nexc 0.50 sqm in each pane complete all as specified and directed.

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded including guard bar 12mm square etc all as specified.

S & F Stainless Steel wire cloth ,0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galv. Wire stapples complete all as specified and directed.

Demolition of brick or stone/boulder masnory, built in cement mortar including all quions, arches, pillars, etc, but excluding alshar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M &L brick work with sub class 'B'bricks straight or curlved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismanling water tanks exc 250 & n exc 500 ltr complete all as specified and directed.

M&L rotational moulded polythelene water store tank, cylindrical vertical with closed top hoisted and fixed in position all as specified capacity of tank 500 ltrs complete all as specified and directed.

S&F ball brass valves, high pressure, with polythene float and flynut complete screwed for 20mm bor iron pipe or brass ferrule and fixed complete all as specified and directed.

Demolition cement concrete (unreinforced) in ground floors and pavings n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection 75mm thick finished top surface even and smooth without using extra cement complete all as specified and directed.

M & L 100 mm thick PCC 1:4:8 mix, type D-2 (40 mm graded stone aggregate) as in sub base for tiling complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L 75 mm thick PCC 1:4:8 mix, type D-2 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L 25mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2008 of 60 mm thickmess M-35 grade complete all as specified and as directed.

Supply and fix 3mm sheet glass ordinary quality fixed in window frame area not exc 0.50 Sqm in each pane complete all as specified and directed.

E/M Portion

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses pendants, regulators, sockets etc to be measured separately) removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

Taking down sheet metal enclouser distribuion board with all rated MCBs any type/ make/ way/ pole etc of /SP/SPN/Isolator/MCCBs and other connecting accessories complete all as directed.

Taking down carefully all type of tube light/ security/ lamp holder etc.all type of fittings complete with all connecting accessories.

Taking down ceiling fans any type and size etc complete with all connecting accessories with dimanteling the fan blade and other accessories to be kept in safe custody and depositing in AGE yard for re-using the same at site all as specified and directed.

S&F in replacement submain wiring with 2 single core PVC insulated multistranded flexible copper conductor 1100 Volts grade FRLS cables 4 Sqmm and 1 run 2.5 Sq mm Earth Wire PVC insulated multistrand cupper conductor cable (FRLS) drawn through PVC casing caping of suitable size and with all accessories all as directed and specified by Engr-In-charge.

S & F Switch piano flush type single pole one way 230V 6 Amps

S & F switch socket combination polycarbonate ISI marked out let 2-in-1 5 pin 6 amps shuttered , flush type

M&L for Point wiring complete with and including 1.5 sq. mm ( nominal area) single core FRLS multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade I S I marked drawn into including PVC Rigid Non-metallic Conduit ISI marked suitable size thickness not less 1.5 mm with accessories such as bend ,tees, junction boxes etc. incl. 1.5 Sqmm PVC insulated and unsheathed multi strand FRLS copper conductor as earth wire including concealed PVC premoulded switch board ISI marked / 3 mm thick hylam sheet in existing MS/ PVC terminal box of suitable size for housing switch, socket and fan regulators etc complete and making good the disturbed surfaces of wall by cement patch all and matching the surface to the existing finising colour all as specified and directed for the following:-

One light point controlled by one switch

One ceiling fan point controlled by one switch

One socket point 6 Amps on the independent board

All as above item No. 5 but using 2.5 Sqmm copper cable FRLS for 15 Amps sockets on independent board and using 2.5 Sqmm PVC insulated unsheathed single core muilti strandard copper conductor cable 1100 volts cable as earth wire connecting to as common earth dolly

Supply and fixing 6 Amps Switch sockets combination moduler type in 2 module 5 pin all as specified and directed.

Supply and fixing 16 Amps Switch sockets combination moduler type in 2 module 5 pin all as specified and directed.

Supply and fixing 6 Amps switch with indicator moduler type in 1 module all as specified and directed.

Supply and fixing combined plate 8 module for power sockets all as specified and directed.

Supply and fixing combined plate 3 module for power sockets all as specified and directed.

Supply and fixing combined plate 2 module for unit all as specified and directed.

Supply and fixing 5 step fan regulator high speed energy saving modular type 1 module complete.

Supply and fixing ceiling rose 3 terminal PVC polycorbonate isolated body complete.

S & F in replacement of 4 feet 20W linear aluminium LED Batten professional CW 6500K cool white complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size. Cat Part No : LHEXACP7IN1W020 of Havells, SZSLAMX020 of Shakti and equavalant of Philips,Bajaj, Crampton, Havells and HPL.

S&F in repair LED Security Light fitting of 30 W, Die cast Aluminium extruded housing with reflector and enclosed with toughened glass IP 65 for Driver all as specified & Directed Make : Cat Part No of Havells UNDURAPEALSL30WLED757SASYTOPC and equavalant of Philips,Bajaj, Crampton and HPL.

S&F energy efficeint BLDC ceiling fan 1200 mm sweep 220 volt including making connection using 3 core flexible cable all as directed Make: Havells,Bajaj ,USHA, Crampton,Surya and Orient.

Supply and fixing sheet metal enclouser disribution board for MCBs to be fixed 240 volts, 8 ways double door with hinged vertical type having 200 rated copper bus bar with neutral link , MCB as incomer complete mounting on teak wooden board in suitable size minium one inch thick complete all as specified and directed.

S & F MCB SPN 10-40 amps, 240Volts 10KA

Supply and fxing MCB , SP, 10 to 40 Amps, 10 KA , 240 volts complete.

Disconnecting and taking out existing old U/S LT UG Cable of size 16 Sq mm 2 core and supply and laying LT UG cable 1100 Volt grade of size 16 Sq mm 2 core PVC insulated PVC beded, galvanised steel strip or wire armoured with strended aluminium conductor complete as specified and directed.

M & L for DWC HDPE Pipe 50 mm outter dia for UG cable protection passing of cables on wall or floors with shaddling and under ground and all as specified and directed by Engineer-in-Charge.

Excavation Soft / loose soil in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm buried directly in ground vertical to a depth not less then 2.25 mtr below ground level with the top edge of earth plate at a depth of not less then 1.5 mtr below normal ground level using GI earth strip in size 25x4 mm connecting to TPN main DB by means of nuts bolts and washers etc. made out of galvanised iron and GI wire connected to main DBs including necessary excavation earth work PCC (1:3:6) type C1 using 20 mm graded stone aggregate earth chamber 40mm thick RCC cover with PCC (1:2:4) type B1 using 20 mm graded stone aggregate 20 mm dia GI medium grade watering pipe and 40 mm for strip, funnel, protection pipe, adequate quantity of common salt, charcoal etc. and connecting up to main DBs complete all as specified and shown in electrical plate No. 3 of MES Sch Part - 1 complete all specified and directed.

D J Construction

H S TAKHI

DR J S CHADHA AND SONS