Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.5 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹50.0 L+₹621.80 (0.01%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹50.0 L+₹931.80 (0.02%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹50.0 L+₹1,226.80 (0.02%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹50.0 L+₹1,439.80 (0.03%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
22 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
PROVN OF PATHWAY COVERED WITH CGI SHEET STORM WATER DRAINAGE SYSTEM WITH CULVERT FOOTPATH 04 X TOILETS FOR HYGIENE SANITATION ADDITIONAL 02 X TOILET AND 02 X BATHROOM AT NEAR JCOS MESS TO HQ COY 3 MAHAR UNIT AREA OF WORKS AT AGE BR II UNDER GE 859
2022_MES_556473_3
8364/E8
Open Tender
Civil Works
Item Rate
270 days
BAISAKHI
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹96,600
Yes
26 Apr 2023
8 Dec 2022
23 Dec 2022
8 Dec 2022
22 Dec 2022
15 Dec 2022
Amount
Surface dressing n exc 15 cm deep and getting out in hard/dense soil with complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil with complete all as specified and directed.
M&L rough Excavation not exc 1.5 m deep and getting out in any type of soil with complete all as specified and directed.
M&L Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil with complete all as specified and directed.
Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soil with complete all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point with complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified.
M&L for Chequered cement concrete tiles 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry with pigment in floors with complete all as specified.
M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Including dismantaling of existing sheet complete all as directed.
M&L for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge, hips, valley gutters fixed with self tapping screws as specified Including dismantaling of existing sheet complete all as directed.
M&L for preparing new galvanised steel surfaces to applying two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width or girth on steel surface with complete all as specified and directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil with complete all as specified and directed.
M&L for PCC 1:2:4, type B-2 (using 40mm graded stone agg) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts including caps and bases with complete all as specified and directed.
M&L RCC (Nominal mix) 1:2:4 , type B-1, (using 20 mm graded aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves with complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 with complete all as specified and directed.
M&L for cement concrete type D-2, 1:4:8 in Cement concrete in foundations, filling and mass concrete with complete all as specified and directed.
M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m graded stone aggregate as in landings, staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces with complete all as specified and directed.
M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in bond stone etc with complete all as specified and directed.
M&L for PCC 1:3:6,type C-2 ( 40mm graded stone agg) as in surface channels and drains.with complete all as specified and directed.
M&L for Use and waste flat form work to vertical faces of drain/retaining wall and similar workwith complete all as specified and directed.
M&L extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc.complete all as specified and directed.
M&L Form work to soffit of suspended flat slabs such as roof slab n-exc 200mm thick (horizontal or sloping) with complete all as specified and directed.
M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be paid for under item 07010) with complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with complete all as specified and directed.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc with complete all as specified and directed.
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, using broken stone or boulders, watered and rammed to a true surface with complete all as specified and directed.
M&L for PCC 100mm thick, type D-2, 1:4:8 (using 40mm graded stone agg) in sub-floors, sub-base, floors and pavings etc with complete all as specified and directed.
M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement with complete all as specified and directed.
M&L rendering 10mm thick in CM 1:4 on concrete inner surfaces finished even and smooth without using extra cement with complete all as specified and directed.
M&L rendering 15mm thick in CM 1:4 on concrete outer surfaces finished even and smooth without using extra cement with complete all as specified and directed.
M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over one coat of white wash as completed with complete all as specified and directed.
M & L for 350 x 250 x7 mm or 450x350x7mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with complete all as specified and directed. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).
M & L for screed bed or bedding layer of 20 mm thick for laying floor finishes in CM (1:6 ) with complete all as specified and directed.
S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick any shape and size confirming to IS 15658-2006 with M- 35 GDE and 6mm top layers of ante abrasive rubberised material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand and laying with grey cement and no pigment . The compressive strength of layer shall not be less than 350 Kg/Cm2 with complete all as secified and directed by Engr-In-Charge.
M&L for Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as secified and directed by Engr-In-Charge.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with complete all as specified and directed. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing with complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing with complete all as specified and directed.
M&L for clean sawn Second class hard-wood in scantlings with complete all as specified and directed.
M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,for ventilators put together with glue pinned at joints, supplied and fixed with complete all as specified and directed.
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded,mitred and rebated sash bars, any numbers for ventilators etc are provided with stiles and rails as specified in SSR Part-1, section 8 clause 8.24(b) with complete all as specified and directed.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F MS window guard bars, window frames plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 etc articles confirming to Fe 290-0 or E-165 with complete all as specified and directed.
M&L for preparation of new or previously untreated surfaceof wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with complete all as specified and directed.
S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed with complete all as specified and directed.
S&F 75 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed with complete all as specified and directed.
S&F 150 mm long aluminium anodized, barrel tower bolts extruded section with complete all as specified and directed.
S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type with complete all as specified and directed.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed
S&F 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed
S & F fancy typy chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed with complete all as specified and directed.
Supply and fix chromium plated brass Bib taps,cast copper alloy with crutch or butterfly handle, screwed down for PP-R pipe for 15mm bore tubing complete all as specified and directed by Eng-in-charge.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors with complete all as specified and directed.
M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed
S&F PVC (SWR) bends any radius with access door, 110mm dia with complete all as specified and directed.
S&F PVC (SWR) bends any radius with access door, 75mm dia.
S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm.
S&F PVC (SWR) junction single, (Single T) equal or unequal of dia75mm.
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors..
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
S&F in 20mm outer dia 3-layer PP-R Polypropylene random copolymer) oncealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded random fittings fixed complete to walls, ceilings or in floors etc with complete all as specified and directed.
S&F in 16mm outer dia 3-layer PP-R Polypropylene random copolymer) oncealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded random fittings fixed complete to walls, ceilings or in floors etc with complete all as specified and directed.
S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm with complete all as specified and directed.
S&F Grating doom 100 mm dia with waste hole of PTMT (mminium weight 25 gms) with complete all as specified and directed.
S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.
S & F Vitreous China squatting pan, "Orissa" pattern, size 630 x450 mm white, with integral foot rest (excluding flusing cistern and flush pipe) with complete all as specified and directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.
S & F 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets with flush pipe complete all as specified and directed.
S & F fancy type chromium plated 20mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed
S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified
S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified
S&F 25mm outerr dia PP-R Gate valves (brass insert) as per requirement of the site with complete all as specified and directed.
M&L for walling of random rubble uncoursed, well bonded,bedded and solidly hearted built in CM 1:6 complete all as specified and directed
Extra over stone walling for hammer dressing with maximum depression from straight edge held against the dressed surface to face beds and joints as specified of random rubble walling uncoursed or brought upto courses complete all specified and directed.
M&L for keyed pointing to random rubble masonry or brought upto course in cement mortar 1:4 complete all specified and directed.
M&L for Hand packing (any thickness )at back filling with broken stone or boulders complete all as specified and directed.
M&L Excavation over area exc 1.5 m deep and getting out in any type of soil with complete all as specified and directed.
M & L for screed bed or bedding layer of 15 mm thick for laying floor finishes in CM (1:6 ) with complete all as specified and directed.
Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
All as per item No. 82 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size
All as per item No. 82 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
All as per item No. 82 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.
S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.
S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
Supply and fixing LED light fitting 1 x 22 Watt 220 volt AC decorative ultra slim polycarbonate LED lighting fixtures with high luminen output, enviournmental friendly, energy effecient connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.Make- Havells/Crompton/Syska
S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.
S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.Make- Havells/Crompton/Syska
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 4 way single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
S&F MCB SPN having braking capacity 10KA, 20 Amps, 240 V complete all as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.
M&L of SPN type rewireable switch fuse unit of 230 Volt 50 Hz single phase double pole of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting duly grouted/fixed in solid block wall or on wooden board as directed including taking down the existing all as specified and directed. Make : INDOASIAN / L&T/Havells
S&F 1100 volt grade heavy duty cable PVC insulated aluminum conductor served with inner sheathed of PVC tape and overall sheathed in service connections , one twin core cable flat or circular multistranded 10 sqmm 2 core complete all as specified and as directed.
S&F Switch Socket combination in 3 pin and 16amp flush type
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.
PIONEER TRADERS
M/S P K ENTERPRISES
M/S TSEWANG ENTERPRISES
M/S DOLKO ENTERPRISES BOMDILA
M/S T P ENTERPRISES
mon traders
D.P. Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .