Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.1 CrAccepted-AOC | L1 | Accepted-AOC Negotiated 1st lowest bidder | |
| 2 | L2₹22.4 Cr+₹19.5 L (0.88%)Rejected-AOC | L2 | Rejected-AOC 2nd lowest bidder | |
| 3 | L3₹22.8 Cr+₹59.4 L (2.68%)Rejected-AOC AT CHAND MARKET COMPLEX N H 6 P O P S BARGARH DISTRICT BARGARH ODISHA | BARGARH | BARGARH | ODISHA | L3 | Rejected-AOC 3rd lowest bidder |
Tender Value
₹21.1 Cr
EMD Value
₹21.1 L
Closing Date
22 Jul 2025, 5:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer, Roads-II, Odisha
O/o the E.I.C (Civil-Cum-Roads), Odisha, Nirman Soudha, New Building, Unit-V, Bhubaneswar
Improvement of Bikash School to Haladipali road from 0/000 km to 0/800 km and from 3/430 km to 4/650 km in the district of Bargarh under State Plan
2025_EICCL_115214_1
CE-ROADS-II-06/2025-26
Open Tender
Civil Works - Roads
Percentage
180 days
Bargarh Division
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,000
₹21.1 L
Yes
20 Jan 2026
7 Jul 2025
23 Jul 2025
7 Jul 2025
22 Jul 2025
7 Jul 2025
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Unit - Cum
Loosening to a depth of 150mm, leveling and compacting original ground supporting embankment /sub-grade as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 305, 305.3.4 of MoRT&H Specification for Road & Bridge works (5th Revision) & including cost of all labour, T&P etc complete and as per direction of Engineer-in-Charge. | - | Cum | 36.05 | - |
| 3 | Unit - Cum
Providing and laying Granular Sub-base with Grading-VI stone screening materials as per Table 400-1 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | - | Cum | 2,221.96 | - |
| 4 | Unit - Cum
Providing Wet Mix Macadam using crushed stone aggregates as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 406 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | 1 | Cum | 2,424.18 | ₹2,421.76 |
| 5 | Unit - Sqm
Providing and applying primer coat with slow setting bitumen emulsion on prepared surface of granular base, including clearing road surface and spraying primer using mechanical means as per approved drawing and technical specifications complete in all respect as per Section 900, Clause 501.5.2 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P etc complete and as per direction of Engineer-in-Charge. | 1 | Sqm | 38.39 | ₹38.35 |
| 6 | Unit - Sqm
Providing and applying tack coat with rapid setting bitumen emulsion on the prepared bituminous/ granular surface including cleaning with mechanical broom and spraying bitumen emulsion using mechanical means as per approved drawing and technical specifications complete in all respect as per Section 900, Clause 501.5.2 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P etc complete and as per direction of Engineer-in-Charge. | 1 | Sqm | 13.41 | ₹13.4 |
| 7 | Unit - Cum
Providing & laying Bituminous Macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 504 of MOSRT&H Specification for Road & Bridge works (4th Revision) &including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge. | 1,817.13 | Cum | 8,126.71 | ₹1,47,67,288.54 |
| 8 | Unit - Cum
Providing & laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 508 of MOSRT&H Specification for Road & Bridge works & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. | 1,090.28 | Cum | 10,483.48 | ₹1,14,29,928.57 |
| 9 | Unit - Kg
Supply, fitting & fixing of MS Grill made out of MS angle(50*50*6)mm size of approved quality including cost of all etc complete and as per direction of Engineer-in-Charge. | 25,890 | kg | 78.68 | ₹20,37,025.2 |
| 10 | Unit - Sqm
Providing road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads@250gms per sqm area , thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes etc. for finished item of work as per approved drawing and technical specification complete in all respect as per Section 900 and Clause 803.4 of MoRT&H specification for road and bridge work (5th Revision) & including cost & conveyance of all materials, labour, T&P etc complete and as per direction of Engineer-in-Charge. | - | Sqm | 278.65 | - |
| 11 | Unit - Each
Providing and fixing of bi-directional retro reflective raised pavement markers of approved colour, quality & make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives as per Section 900 & Clause 804 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P etc complete in all respect and as per direction of the Engineer-in-charge. | - | Each | 282 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tenderdocument.pdf
Tender Documents • 0.71 MB
BOQ.xls
BOQ • 1.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .