Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC Accepted due to lowest rate quoted | |
| 2 | L2₹34.0 L+₹1.6 L (5.07%)Rejected-Finance | L2 | Rejected-Finance Rejected due to highest rate quoted | |
| 3 | L3₹34.1 L+₹1.7 L (5.39%)Rejected-Finance C 223 MIANWALI COLONY GURGAON 122001 HARYANA | GURUGRAM | HARYANA | 122001 | L3 | Rejected-Finance Rejected due to highest rate quoted | |
| 4 | L4₹35.9 L+₹3.6 L (11.0%)Rejected-Finance | L4 | Rejected-Finance Rejected due to highest rate quoted | |
| 5 | L5₹36.5 L+₹4.2 L (12.8%)Rejected-Finance | L5 | Rejected-Finance Rejected due to highest rate quoted |
Tender Value
₹43.2 L
EMD Value
₹86,400
Closing Date
7 Jul 2025, 6:00 pmClosed
GE (AF) GURGAON
GE (AF) GURGAON
PROVN OF PARKING SHED AT VARIOUS LOCATIONS AT AF STN NARELA UNDER GE AF GURGAON
2025_MES_713321_1
GE/GUR-/NIT-23/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (AF) GURGAON
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) GURGAON
₹86,400
Yes
31 Jul 2025
9 Jun 2025
9 Jul 2025
9 Jun 2025
7 Jul 2025
23 Jun 2025
Amount
Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided complete including dismantling of floor tiles etc complete all as specified.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting outgetting out soft/loose soil.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out soft/loose soil complete all as specified.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified.
M&L for cement concrete type B-1, 1:2:4 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified.
M&L 100 mm thick PCC 1:4:8 tybe D-2 using 40mm stone aggregate as in subbase.Complete all as specified
M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete.
M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar (1:4) complete all as specified.
M&L for half brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified.
M&L for 15 mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde E- 250) quality A all as specified.
S&F 11 to 15 mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length exc 5 cm and n exc 10 cm long all as specified.
S&F 16 to 20 mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length exc 22.50 cm and n exc 30 cm long all as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F 1 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified.
M&L prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soft/loose soil etc complete all as specified.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.
E/M SCHEDULE
M&L for Conduit point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire and connected to earth dolly for 15/16 amp multi purpose socket combination point on independent board. drawn through and including stove enamelled metallic rigid conduit,medium grade minimum 19/20/25mm dia ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,switches,sockets outlets,regulators etc complete for the following : Note:-conduit to be run surface where existimg steel rod, celing,RCC & rate are inclusive of fixing accessories on wall etc.
One light point controlled by one,one way switch.
One 3 pin socket 15/16 amp on the independent board.
S&F switch piano flush type single pole 1 way 15/16 A, complete all as specified and directed.
S&F multi pin socket outlet 2 in 1, 3 Pin 5 and 15 Amps, flush type complete all as specified and directed.
S & F Single pole and neutral (SPN) 8 way MCB distribution box doble door powder coated sheet metal encloser IP43, 240 volts including 200 amps rated bus bar complete all as specified and directed.
S&F of MCB single pole (SP) 240 Volt 6 to 32 Amp, rupturing capacity 10 KA complete all as specified and directed.
S&F of MCB single pole & Neutral (SPN) 240 Volt 6 to 32 Amp, rupturing capacity 10 KA complete all as specified and directed.
M & L for Submain wiring with two single core of 4 Sqmm and one single core of 2.5 sqmm as earth wire with multi stranded copper conductor cable PVC (FR) insulated unsheathed cable 1100 volts grade drawn through in steel enamelled Conduit (ISI Marked)of size 20/25 mm dia and the conduits accessories as complete including making good the distrubed surface to match the existing surfce.
Supply and fixing LED flood light 70 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp as directed.
M/S LADPURIA ENTERPRISES (BID ID -3341601)
M/S ujjwal associates (BID ID -3341618)
Shiv Shakti Builders (BID ID -3340828)
SHAKSHI ENTERPRISES (BID ID -3349409)
innovision limited (BID ID -3336171)
Nikunj Bansal Govt Contractor (BID ID -3341180)
akhil enterprises (BID ID -3350547)
sumit associates (BID ID -3341158)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .