Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹41.3 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹41.5 L+₹19,631.75 (0.48%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹44.5 L+₹3.2 L (7.83%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹47.4 L+₹6.1 L (14.7%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹48.0 L+₹6.7 L (16.2%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
16 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
REPAIR TO MISC B/R WORKS TO OTM/ MD ACCN IN CAMP AREA AND PINTO PARK AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2023_MES_596675_1
GENP-29/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹98,000
Yes
9 Aug 2023
19 May 2023
17 Jun 2023
19 May 2023
16 Jun 2023
3 Jun 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing including removing the debris from site to outside MoD land.
M&L for 25mm thick cement concrete 1: 2 :4 type B-1 (using 20mm graded stone aggregate) as in floor including finishing surface even and fair without using extra cement .
M&L for non skid coloured ceramic tiles 7 to 8 mm thick first quality (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed in cement mortar 1:4.
M&L for glazed coloured ceramic tiles as on vertical surfaces of size 450x300x7mm thick first quality, set and jointed in cement slurry and pointed in white or coloured cement to match the tiles laid over & including 10mm thick rendering in cement mortar 1:4..
M&L for vitrified tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:4.
Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land.
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates/block, kerbs, window cills, water troughs and the like including weathering, slightly rounded or chamfered angles and throating.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exc 150 mm thickness (below or above ground level) including removing the debris from site to outside MoD land.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 including finishing surface even and fair without using extra cement but with liquid water proofing compound as per manufacturer's instructions upto and including 4th storey bldg with necessary scaffolding . (Note : WPC will be measured and paid separately)
Supply only Liquid Water Proofing compound.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over 85/25 grade industrial bituminous coat @ 1.20Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm on newly plastered, clean and dry sunken surface including sealing of joint by torch application complete all as specified & as directed by Engr-in-charge.
M&L for lean cement concrete 1:5:10, type E-2 using 40mm graded stone aggregate as in filling under floor/sunken slab, mass concrete, foundation etc including finished even and fair without using extra cement.
S&F in repair 20mm dia galvanised steel water tubing ‘Medium Grade’ with all ISI marked including fittings fixed on walls, ceiling or laid in floors etc complete.
S&F in repair 15mm dia galvanised steel water tubing ‘Medium Grade’ with all ISI marked including fittings fixed on walls, ceiling or laid in floors etc complete.
S&F in repair 15mm dia pillar tap, cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe.
S&F in repair 15mm dia bib taps, chromium plated, fancy type, cast copper alloy crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repair 15mm dia angle valve, chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair soap dish, vitreous China white, approximate size 160x 160x90mm fixing with brass chromium plated screws as all specified and directed.
S&F in repairs health faucet chromium plated with 1 mtr tube and hook all as specifid and directed. Make : Cat Pt No ALD-CHR-563 of Jaquar or its equivalent in Kohler/ Marc.
S&F in repair tubular towel rail, chromium plated 20mm dia, D type, 90cm long between flanges fixed with chromium plated brass screw and plastic cleats complete.
S&F in repair 15mm dia bib taps, long body, chromium plated, fancy type, cast copper alloy crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F for 20mm dia stop valves, chromium plated, cast copper alloy, screwed down, high pressure, with long shank or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with ‘P’ or 'S' trap with plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete.
S&F in repair vitreous china squatting pan 'white' Orissa pattern of size 580mmx440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron 'P' trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor.
S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.
S&F in repair 100mm bore cast iron (sand cast) soil, waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete.
S&F in repair 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door.
S&F in repair 100mm bore cast iron single branch pieces with oval access door fixed with cement joints with oval access door.
S&F in repair cast iron floor trap/ Nahani trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete.
S&F in repair 75mm bore cast iron (sand cast) soil, waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete.
M &L in replacement of 1000 litres capacity rotational moulded polyethene water storage tank white colour (cylindrical vertical with closed top) three layers, hoisted and fixed in position all as specified.
M &L in replacement of 500 litres capacity rotational moulded polyethene water storage tank white colour (cylindrical vertical with closed top) three layers, hoisted and fixed in position all as specified.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed by Engineer in charge.
S&F in repair 20 mm gun metal, globe or gate valves, with iron wheel head or lever half turn, screwed both ends for iron pipe and fixed
S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed.
S&F for factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F for 150mm long aluminium anodised handles, cast type.
S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long.
S&F in repair stainless steel butt hinges 100mm size fixed with screws complete.
S&F for aluminium sliding door bolt 250 mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete.
Taking down steel ventilators of any size and description upto four story building complete.
S&F for mild steel work framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface of any description over 10cm width or girth including preparation of surfaces.
S&F for anodised aluminium power coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
Taking down cement or cement lime plaster on brick/ stone or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc upto 4th storey building including removing the debris from site to outside MoD land.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 including finishing surface even and fair without using extra cement but with liquid water proofing compound by weight as per manufacturer's instructions upto and including 4th storey bldg with necessary scaffolding . (Note : WPC will be measured and paid separately)
M&L for 10 mm thick cement plaster on other than fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 including finishing surface even and smooth without using extra cement upto four story bldg including necessary scaffolding.
M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings including finishing surface even and smooth without using extra cement upto four story bldg including necessary scaffolding.
M&L for preparation for newly plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer upto four storey bldg.
M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint 100% acrilic of approved white or coloured over a coat of primer over 1mm thick (avg) wall care putty complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper white or coloured over a coat of primer over 1mm thick (avg) wall care putty complete all as specified & directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of walls by removal of nails etc & applying two coats of oil emulsion distemper white or coloured over a coat of primer over 1mm thick (avg) wall care putty upto four storey bldg all as specified & directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of walls by removal of nails etc & applying two coats of exterior emulsion paint 100% acrilic of approved white or coloured over a coat of primer over 1mm thick (avg) wall care putty complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of plastered or unplastered old decorated surfaces of ceiling, filling cracks/hole by applying wall care putty and applying one coat oil emulsion distemper white or coloured complete.
M&L for preparation of old painted wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint.
M&L for preparation of old painted steel & steel based surface of any description no otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint.
M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete.
S&F in repair 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including suitable clamps upto four storey bldg complete.
S&F in repair 100mm dia PVC (SWR) Tee / bend with oval access door cap.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.
S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M&L for repair to old steel gate of size 2.50m wide by taking down, cutting into the size, erecting in position and welding including necessary painting complete.
S&F in repair mild steel framed work such as sun shade, guard bar, cooler stand, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Taking down chowkats or frames with shutters (but without taking off shutters from the frames) area not exceeding 1.5 Sqm each.
Taking down chowkats or frames with shutters (but without taking off shutters from the frames) area exc 1.5 Sqm but not exc 4 Sqm each.
Taking down shutter of any description area exc 1 Sqm but not exc 2 Sqm each.
S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete.
M&L for 35mm thick second class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F for anodised aluminium coloured power coated (minimum thickness of powder coating 50 micron) door frame and shutter, single or double leaf glazed with pre-laminated particle board interior grade including aluminium powder coated beading, rubber gasket and packing materials drilling in existing wall and thrust bolt of suitable size complete comprising the following:- (a) Door frame section 101.60mm x 44.45mm x 1.93 mm fixed as per specified. (b) Door Shutter Vertical Style of Size 85mmx44.45mmx2 mm as per specified. (c) Door Shutter top style section 95.25mmx44.45mmx2.00 mm as per spd. (d) Middle lock rail/bottom rail section 150mmx44.45mmx1.93mm. (e) Aluminium coloured powder coated tower bolt 02 Nos in each shutter of 200 mm long. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long. (g) Door Floor spring ISI Marked in each shutter. (h) Six lever mortice lock brass in each door. (j) 12 mm thick pre laminated particle board (pre laminated both face) exterior grade ISI Marked (k) 5mm thick tinted glass/Plain glass(Colour).
S&F for anodised aluminium power coated (minimum thickness of powder coating 50 micron) window frame (coloured as approved by GE) of three track using Jindal section No 20832 (92mmx31.75mmx1.50mm or its equivalent) fixed with thrust bolt in walls by drilling and sliding shutter of section No 20844 (40mmx18mmx1.29mm) or its equivalent section for glass including 4.00mm thick tinted glass fixed with rubber beading and bushes complete in two track and 0.36 mm dia and 1.40mm aperture stainless steel wire mesh fixed with screw and aluminium beading complete all as specified and as directed.
Taking down old aluminum door/windows of any description of size exc.1.5 sqm but not exc. 3.00 sqm and M&L for complete over hauling of the glass pane frame/rubber beading/aluminum glazing clip sliding system locking system including necessary oiling and adjustment etc and re-fixing in same location complete all as directed. (Note :- Glass Pane/rubber beeding/aluminum beading etc will be measured and paid separately under subsequent items).
Taking down old aluminum door/windows of any description of size not exc.1.5 sqm and M&L for complete over hauling of the glass pane frame/rubber beading/aluminum glazing clip sliding system locking system including necessary oiling and adjustment etc and re-fixing in same location complete all as directed. (Note :- Glass Pane/rubber beeding/aluminum beading etc will be measured and paid separately under subsequent items).
S&F in repair rubber beading to be fixed over glass panes in aluminum windows complete.
S&F in repair aluminum anodised glazing clip to the alumiinum window frames after fixing the glass panes complete.
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for fixing railing, holdfast and the like including weathering, slightly rounded or chamfered angles and throating.
Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.
S&F for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including necesssary scaffolding / ladder and safety measures upto four storey bldg.
S&F for 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including necesssary scaffolding / ladder and safety measures upto four storey bldg.
S&F in repair for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apoerture 1.40mm and fixed with aluminium/wooden/steel beads complete.
S & F in repair floor door stopper of size 75 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring including cleats etc fixed to door.
S&F in repairs 25mm dia 16 gauge aluminium powder coated curtain rods including cutting and fixing complete.
S& F in repairs designer pattern wall bracket suitable for 25mm dia curtain rods complete.
S& F in repairs designer pattern side knobs/domes suitable for 25mm dia curtain rods complete.
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, wooden etc.) or insulation board / slabs any thickness including cover fillets.
S&F for solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.
S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
S&F for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specied and directed.
M&L for mirror polishing on marble /granite/kota stone required to give high gloss finish complete.
M & L for 75mm thick cement concrete 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection including finishing even and smooth surface without using extra cement and making joints 12 mm wide to the full depth of concrete at every 3 metres interval and at every change of direction and filling the same with bitumen (85/25 grade) sand mastic complete all as specified.
M&L for factory made chequered cement concrete tiles 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry with grey cement and pigment over and including screed bed 15mm thick in cement mortar (1:6) as in floors, path etc complete.
M&L for 60 mm thick factory made, machine pressed, precast concrete interlocking paver block of M-35 grade with grey cement & pigment complete.
M&L sand layer under floor of interlocking paver tiles including watering and consolidation.
M & L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in Sub base etc complete all as specified.
M&L for 20 mm thick granite (of any type) slab, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing for window cills and similar work laid over 15 mm thick screed bed in cement mortar 1:4 all as specified and directed by Engr-in-charge
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete.
S & F in repair door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of weight not more than 35 kg of aluminum body (die cast) and fixed as specified cast iron body.
Dismantling of existing roof treatment including tiles, plaster of any thickness and removing the debris from site to outside MoD land.
M&L for cement concrete 1:2:4 type B-1 (using 20mm grade stone aggregate) as in padding of roof to maintain the required slope complete all as specified and directed by Engr-in-charge.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over 85/25 grade industrial bituminous coat @ 1.20Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm over 10mm thick screed bed in cement mortar 1:4 mixed with liquid water proofing compound including preparation of surfaces and sealing of joint by torch application complete all as specified & as directed by Engr-in-charge.
M&L for factory made cement concrete tiles 250mm x 250mm x 25mm thick, machine pressed, set & pointed in neat cement slurry with grey cement and no pigment on roof over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus spoil to a distance not exceeding 50 m and making good surface all as specified and as directed.
S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).
High Tech Metal India
Mahesh Enterprises
VIJAY KUMAR GUPTA
JAIPAL AND BROTHERS
M/S Davinder Kumar
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .