Repair and maintenance works of water supply network of colonies including AMC works at Booster and pump houses under GM Unit, Piparwar Area.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6(1 cement :6 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix: 1:4(1 cement: 4 fine sand)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 32 mm dia nominal bore

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4 sq. mm

Providing of Nylone rope 12mm dia

Providing of Rigid PVC pipe 50mm outer dia conforming to IS:4985 specification(6kgf/sqcm)

Lowering and commissioning of submersible pump in the deep bore well with rigid PVC pipe, all accessories ect. Complete including cost of labour but excluding the cost of materials and fittings (Cost of pump, cable, rigid PVC pipe, control panel to be paid separately)

Providing and fixing bolts including nuts and washers complete.

Welding by gas or electric plant including transportation of plant at site etc. complete

Providing Gailen Packing of Different Sizes

Lifting of submersible pump-motor set from deep bore well with rigid PVC pipe of 50 mm dia including all accessories etc. complete including stacking all materials as per instruction of Engineer-in-charge.

Supplying and Installation of Control Panel board of 3 HP submersible pump of capacity 3 HP etc all complete as per direction of EIC

Supplying and Installation of Control Panel board of 2 HP submersible pump of capacity 2 HP etc all complete as per direction of EIC

Making Checknut with material for different size 3 inch dia

Making checknut with material for different size 4 inch dia

Making checknut with material for different size 6 inch dia

Making gun matle spindal for different size 3 inch dia

Making gun matel spandle for different size 4 inch dia

Making gun matel spandle for different size 6 inch dia

Supplying labours, tools and tackles for cleaning filled and choaked man hole, septic tank, inspection-chamber, gullay pits, sewerage tank etc. in all lift and disposal of spoils upto a lead of 50M all complete as per specification and direction of E/I.

Cleaning of all type of roofs including removal of dry leaves,weeding and cleaning drain holes,brooming etc. all complete with tools and tackels and stacking the garbage at specified places as per instruction of EIC.

Labour charges for cleaning of toilet including W.C. Pan washbasin other fittings if any for quarters by hand dusting and cleaning to make the toilet clean with tools and tackles and uniform etc. all complete as per instruction of EIC

Disposal of dead animals like street dog,pigs,cat etc. as an when required including digging of pits and buring the same as per instrution of engineer in charge As per Practical observation

Disposal of dead animals like cow,ox,buffalow etc. as an when required including digging of pits and buring the same as per instrution of engineer in charge As per Practical observation

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge

Trimming of tree branches coming out of main trunk having girth 30 cm to 60 cm measured at knot of a main trunk.The avarage height of tree is 3.00 mtr and above. It also includes stacking of serviceable materials and disposal of unserviceable materials upt the lead of 300 mtrs as per direction of EIC.( based on actual observation at site)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12 mm cement plaster of mix: 1:4(1 cement: 4 fine sand)

Neat cement punning

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information