Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance PLOT NO 28 8 D II BLOCK MIDC D II BLOCK MIDC NEAR KSB CHOWK CHINCHWAD PUNE CHINCHWAD PUNE PUNE MAHARASHTRA 411019 | PUNE | MAHARASHTRA | 411019 | Admitted-Finance |
| 2 | Admitted-Finance C 30 JAI MATADI COMPOUND KALHER VILLAGE THANE BHIWANDI ROAD KALHER THANE THANE MAHARASHTRA 421302 | THANE | MAHARASHTRA | 421302 | Admitted-Finance |
| 3 | Admitted-Finance TC III BUILDING POST BAG 979 LNT VALVES MOUNT POONAMALLE ROAD MOUNT POONAMALLEE ROAD MANAPAKKAM KANCHIPURAM TAMIL NADU 600089 | KANCHIPURAM | TAMIL NADU | 600089 | Admitted-Finance |
| 4 | Admitted-Finance D115 GHATKOPAR INDUSTRIAL ESTATE L B S MARG GHATKOPAR WEST MUMBAI MAHARASHTRA 400086 | MUMBAI SUBURBAN | MAHARASHTRA | 400086 | Admitted-Finance |
| 5 | Admitted-Finance T 45 MIDC INDUSTRIAL AREA HINGNA ROAD NAGPUR NAGPUR MAHARASHTRA 440016 | NAGPUR | MAHARASHTRA | 440016 | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
16 Feb 2023, 3:00 pmClosed
Sushant Deshpande
thyssenkrupp Industrial Solutions India Pvt Ltd Vikhroli Mumbai India
SUPPLY OF BALL VALVES FIRE SAFE AND NON FIRE SAFE as per Technical Specifications for Numaligarh Refinery Limited
2023_NRL_733697_1
TK-1ZZZA-MP-RFQ-0085
Limited
Miscellaneous Goods
Supply
180 days
Numaligarh Refinary Limited Assam
As per Technical Specifications
5 documents required · 5 mandatory
₹0
Exempted
2 Jun 2023
9 Jan 2023
17 Feb 2023
9 Jan 2023
16 Feb 2023
19 Jan 2023
9 Jan 2023 - 14 Jan 2023
GROUP -1 SUPPLY OF BALL VALVES (NON FIRE SAFE) for NREP PROJECT incuding TPI charges as specified in Material Requisition.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, GO, SINGLE REDUCED BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS INT. COATED, 150,0, API 608, FLGD,B16.5,FF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, INTERNALLY LIQUID EPOXY COATED ACC. TO, DOC. NR-0ZZZZ-CV-SPE-0019, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 15 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
GROUP -2 SUPPLY OF BALL VALVES (FIRE SAFE) for NREP PROJECT incuding TPI charges as specified in Material Requisition.
BALL VALVE CS, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 16.5 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 16.5 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 16.5 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 16.5 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (H2 SER.), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., A105N/A216 Gr.WCB, A182 F304 /A351 CF8, STEM SS 304, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 44.6 KG/CM2(G), DESIGN TEMPERATURE 190 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 70 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
BALL VALVE CS (NACE+CAUSTIC), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., SERVICE NACE, CATEGORY 1, A105N/A216 Gr.WCB, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193GrB7M/A194 Gr2HM, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, FOR SOUR(NACE) SERVICE REQ. ACC. TO, NACE MR0103,NR-0ZZZZ-PI-SPE-0025 AND IN-043, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 35 KG/CM2(G), DESIGN TEMPERATURE 120 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED.
GROUP -3 SUPPLY OF BALL VALVES (METAL SEATED TYPE FIRE SAFE) for NREP PROJECT incuding TPI charges as specified in Material Requisition.
BALL VALVE AS (H2 SER.), 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, ALL WELDS SHALL BE SUBJECTED, TO PWHT., A182F11CL2/A217GrWC6, SS316 + HF, STEM SS 316, SS316 + HF, SEAL FLEXIBLE GRAPHITE, A193 GrB16/A194Gr.16, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2" TO, 11/2"AND SINGLE REDUCED BORE FOR 2" & ABOVE, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, DESIGN PRESSURE 8.4 KG/CM2(G), DESIGN TEMPERATURE 545 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., VALVE SHALL BE SUITABLE FOR SOLIDS, HANDLING.
ANAND TEKNOW AIDS ENGINEERING INDIA LTD
NSSL Limited
DEMBLA VALVES LIMITED
NITON VALVE INDUSTRIES PVT LTD
L&T VALVES LIMITED
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .