Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-Finance | L1 | Accepted-Finance accepted | |
| 2 | L2₹6.8 L+₹32,859 (5.09%)Accepted-Finance | L2 | Accepted-Finance accepted |
| Sl No | Description | Qty | Unit | SRI RAVI BALAJI ERECTORS L2 | WEDWAY INDUSTRIES L1 |
|---|---|---|---|---|---|
| 1.00 | Complete Overhauling of 3500KW/ 6.6 KV Boiler Feed Pump MOTOR (3C)
Removal of end covers and measuring the air gap and magnetic axis | 1 | No | 2,785 ₹2,785 | 2,700 ₹2,700 Lowest |
| 2.00 | Removal of water line pipes, cooler assembly and lifting the cooler unit to a convenient location. | 1 | No | 5,650 ₹5,650 | 5,400 ₹5,400 Lowest |
| 3.00 | Removal of sleeve bearings, resting the rotor on the stator after placing rubber sheet. | 1 | No | 12,952 ₹12,952 | 12,300 ₹12,300 Lowest |
| 4.00 | Removal of foundation bolts, Lifting the motor to a convenient location. | 1 | No | 12,952 ₹12,952 | 12,300 ₹12,300 Lowest |
| 5.00 | Overhaul of stator : Inspection and cleaning and checking of stator windings, fastening of the stator winding to the end ring and also the inter coil spacers and packing in the overhang portion of the windings, tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, Drying out the stator, preheating, Checking the IR value, DC resistance and Tan delta, packing in the overhang portion of the windings, tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, Drying out the stator, preheating, Checking the IR value, DC resistance and Tan delta. | 1 | No | 73,335 ₹73,335 | 69,200 ₹69,200 Lowest |
| 6.00 | Overhaul of rotor :Inspection and cleaning of released rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, cleaning of overheated and burnt places, applying one coat of Dr.Beck’s insulating varnish and drying out. | 1 | No | 18,686 ₹18,686 | 17,700 ₹17,700 Lowest |
| 7.00 | Cleaning the cooler tubes, checking the coolers by hydraulic testing, reconditioning of cooler flanges, replacement of gasket etc, | 1 | No | 40,017 ₹40,017 | 37,800 ₹37,800 Lowest |
| 8.00 | Checking the bearing and preparation of bearing surface and blue matching the housing. (Bearings supplied by TANGEDCO) | 1 | No | 15,634 ₹15,634 | 14,800 ₹14,800 Lowest |
| 9.00 | Lifting and Erection of the motor back on its bed after cleaning and checking healthiness of pedestal insulation. | 1 | No | 12,952 ₹12,952 | 12,300 ₹12,300 Lowest |
| 10.00 | Assembling of sleeve bearings, Checking the interference between the bearings and housing, checking the clearance between shaft and bearing. (Bearings supplied by TANGEDCO) | 1 | No | 12,952 ₹12,952 | 12,300 ₹12,300 Lowest |
Tender Value
Refer Docs
EMD Value
₹6,500
Closing Date
12 Aug 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE/ES/NCTPS-I
Superintending Engineer Electrical System NCTPS I Chennai 120
NCTPS I ES Circle EM I Dn S Dn IV Annual Over hauling of HT LT Motors at Unit III during the year 2025 2026
2025_EB_586793_1
CE/NCTPS-I/SE/ES/WC-21/2025-26
Open Tender
Power/Energy Projects/Products
Works
365 days
NCTPS-I
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹6,500
Yes
15 Oct 2025
29 Jul 2025
13 Aug 2025
29 Jul 2025
12 Aug 2025
29 Jul 2025
Amount
Complete Overhauling of 3500KW/ 6.6 KV Boiler Feed Pump MOTOR (3C) Removal of end covers and measuring the air gap and magnetic axis
Removal of water line pipes, cooler assembly and lifting the cooler unit to a convenient location.
Removal of sleeve bearings, resting the rotor on the stator after placing rubber sheet.
Removal of foundation bolts, Lifting the motor to a convenient location.
Overhaul of stator : Inspection and cleaning and checking of stator windings, fastening of the stator winding to the end ring and also the inter coil spacers and packing in the overhang portion of the windings, tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, Drying out the stator, preheating, Checking the IR value, DC resistance and Tan delta, packing in the overhang portion of the windings, tightening the wedges, spraying one coat of Dr.Beck protective enamel varnish, Drying out the stator, preheating, Checking the IR value, DC resistance and Tan delta.
Overhaul of rotor :Inspection and cleaning of released rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, cleaning of overheated and burnt places, applying one coat of Dr.Beck’s insulating varnish and drying out.
Cleaning the cooler tubes, checking the coolers by hydraulic testing, reconditioning of cooler flanges, replacement of gasket etc,
Checking the bearing and preparation of bearing surface and blue matching the housing. (Bearings supplied by TANGEDCO)
Lifting and Erection of the motor back on its bed after cleaning and checking healthiness of pedestal insulation.
Assembling of sleeve bearings, Checking the interference between the bearings and housing, checking the clearance between shaft and bearing. (Bearings supplied by TANGEDCO)
Assembling the end covers, checking air gap and magnetic axis.
Lifting the cooler assembly ,fixing with motor and connecting the water line pipes, etc.,
Tightening the bed bolts, foundation bolts, Checking the IR value, DC resistance and trial run the motor in decouple/couple condition running the motor satisfactorily.
Machining of Oil Catcher of Boiler Feed Pump motor
Overhauling of LT Motors Overhauling of Auxiliary Oil Pump (MOT) Motor-3B (100 KW)
Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional)
Overhauling of Auxiliary cooling water pump motor – 3B & 3D (110 KW LT Motor)
Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional)
Brazing of new terminal leads from winding (Optional).
Overhauling of Sea water booster pump motor - 3C & 3D ( 55 KW LT Motor)
Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Brazing of new terminal leads from winding, its termination works and provision of New Terminal Block for 3 phase, 415 V, 55KW Sea Water Booster Pump motor (Optional).
Overhauling of Ash water supply pump motor-3A (37 KW)
Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Instrument Air Compressor motor- 3C (150KW)
Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional)
Brazing of new terminal leads from winding, its termination works (150 KW Instrument Air Compressor motor) (Optional).
Overhauling of Vacuum pump motor -3A (93 KW)
Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional)
Overhauling of Stator water pump motor – 3A (9.3KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of AC seal oil pump motor (5.5KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Auxiliary Oil Pump (BFP) Motor-3A (5.5 KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of On line Tube Cleaning motor-3B (5.5 KW)
Overhauling of Debris Flushing Pump Motor -3B (11KW)
Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Phosphate dosing pump Motor -3B (3.7KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Hydrazine dosing pump Motor -1B (0.75 KW)
Overhauling of Stator water Vacuum pump Motor-3B (2.2 KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Generator Seal Oil Vapour Extraction Fan Motor-3B (1.5 KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Gland Steam Exhaust Fan Motor-3B (2.2 KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Priming Pump motor (11 KW)
Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Recirculation Pump motor of Vacuum Pump – 3A (1.5 KW)
Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional)
Overhauling of Seal Oil Vacuum Pump motor (0.18 KW)
Special Consumable 6318 C3 (for 100 KW DE & NDE Side) Make:NTN Imported; Cage: Steel
N321 (for 150 KW DE Side) Make:SKF; Cage: Brass
6318 (for 150 KW NDE Side) Make:NTN Imported; Cage: Steel
6319 C3 (110KW NDE Side) & (93KW DE Side) Make: NTN Imported; Cage: Steel
N 319 (for 93 KW NDE Side) Make: NTN Imported; Cage: Brass
NU 319 (for 110 KW DE Side) Make: FAG; Cage: Brass
6215 C3 (for 55KW & 37KW NDE Side) Make:NTN Imported; Cage: Steel
NU 215 (for 55KW & 37KW DE Side) Make:NTN Imported; Cage: Brass
Consumable & T&P
SRI RAVI BALAJI ERECTORS (BID ID -1427104)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .