COMPREHENSIVE MAINT TO MD ACCN UNDER AGE B/R - II OF GE (W) AGRA.

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 2 shall be reused after cleaning.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10 to 12mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over interior surface of wall complete all as specified and directed

M&L for 10 to 12mm smart care ready mix repair plaster is specially designed ready to use cement-based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over exterior wall surface complete all as specified and directed

M&L washed stone grit plaster on exterior walls in two layers under layer 12 mm thick cement plaster 1:4 (1 cement 4 coarse sand furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2 (1 cement 1/2 coarse sand :2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified (payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15 deep in the top layer of washed stone girthplaster as per approved pattern using wooden battens ,nailed to the under layer including removal of wooden battens repair tothe edges of panes and finishing the groove complete as per specifications and of the Engineer -in -charge.

M & L for 5 mm thick smart care ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over ceiling surface complete all as specified and directed

M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical complete all as specified and directed.

M&L for applying one coats of oil bound distemper with roller on old decorated wall surfaces including preparation of old wall etc complete all as specified and directed.

M & L for Preparing newly plastered or un plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for Preparing old plastered or un plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.

M&L for complete removal of extg treatment with mechanical device of old plastered surfaces of ceiling and applying two coat of white wash (match with new surface) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in sub base of floor/path/paving and plinth protection finished even and smooth without using extra cement all as specified.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of CM (1:6) complete all as specified and directed.

M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed.

M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.

M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed CM (1:6) complete all as specified and directed.

M&L Machine cut kota stone 20-25 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing laid over and including 15mm thick rendering CM (1:4) complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in marble in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like in CM (1:4) incl pointing in white cement (1:2) match the shade of the slab using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing incl 20mm thick screed bed in CM (1:4) complete all as specified and as directed.

Boring holes through cooking platform lining for pipes ,etc n'exc 50mm dia and making good complete all as spd and dir by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed.

M&L cement concrete type B-0, 1:2:4 mix ( 12.5 mm graded agg) filling in door frames, coping, window chill etc complete all as specified and directed.

M&L for Pressed steel frame size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M&L for Pressed steel frame size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed skeleton door shutters open rebated and prepare to receive glass, gauge etc. divided into suares, with plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 149 of SSR 2020 (Part-II)

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet instead of plain colour PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinge with hold fast, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinge with hold fast, steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel ventilators with top hung shutters including hinge with hold fast, steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.

S&F for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tank and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

S & F Stainless steel wire cloth, 0.71 mm nominal dia of wire fixed with tinned tacks, of 20mm mesh of stainless steel wire staples complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M & L for second class hardwood plain fillets exc 13Sqcm and n exc 25 Sqcm, suare, rectangular in section clean sawn secured with nails for cubboard frame work comlete all as specified and directed.

S & F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, for cup board shelf fixed with screws to timber frame/welding to steel frame work incl all around wooden beading min 10mm thick with varnishing and flushing with particle board complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised. (40mm Width of flaps when open) complete all as specified and directed.

S&F 100 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.

S & F 20mm dia stainless steel pipe for cupboard complete all as specified and directed.

S & F 20mm stainless steel bracket complete all as specified and directed.

S&F in repairs stainless steel drapery rods, 25mm internal diameter including decoratine type brackets including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, alusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing holdpast and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

M & L for applying one coats of synthetic enamel paint including preparation of old steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etc of grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed..

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed.

M&L RCC Type B0 1:2:4 Type using (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and beams etc. complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping rough finished surfaces of concrete flat etc. complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surfaces of concrete. complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

All as per item No 78 above but 20mm bore

S&F 15mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and directed.

Refixing/laying only old steel tubing 15 mm dia bore and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified & as directed.

S&F 20mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified & as directed.

Refixing/laying only old steel tubing 20 mm dia bore and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified & as directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white with 'P' or 'S' trap incl seat and cover (excluding fluxing cistern and flush pipe) complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed. .

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S&F in repair CP jet Spray heavy duty with PVC connection complete all as specified and directed.

S&F in repair CP health faucet ABS body with wall hook and 1 mtr stainless steel braided rubber hose complete all as specified and directed.

S & F in 15 mm bore brass chromium plated mixer hot & cold water screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore, brass chromium plated basin mixer screwed down high pressure with or without lettered Hot ot Cold with long screwed and fly nuts screwed for pipe and fixed complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair chromium plated brass 15 mm dia two way bib tap with other way external thread complete all as specified and directed.

S&F in repair chromium plated brass 15 mm dia long body bib tap complete all as specified and directed.

S&F in repair 15 mm bore CP Stop valve / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair 15 mm bore CP two way angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair 15 mm bore CP concealed Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair soap dish brass chromium plated of approximate size 100mmx80mm complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers incl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.

S&F in repair 32mm CP Waste coupling (half or full threaded) in suitable for Sink complete all as specified and directed.

S&F 32 mm dia PVC flexible waste pipe 800mm long etc. complete all as specified and directed.

S&F in repair mirror cabinet PTMT size 350 x 445mm fixed with screws complete all as specified and directed.

S&F plate rack of 1mm thick stainless steel of size 750 x 900 x 230mm with three shelves fixed to wall complete all as specified and directed.

S & F in repair tubular towel rail 60 cm length of stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repairs CP shower rose 125mm dia alongwith shower arm complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair 150 mm square PTMT grating with openable flap (Min weight 100 gms) complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.

S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed.

S&F in 110 mm bore PVC (SWR) single Y with access door of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed.

S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S & F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and applying a coat of cement slurry with 3.00 kg of cement per sqm and rendering 15mm thick in CM 1:3 using WPC finished rough (Sunken floor/Wall) and then applying two course treatment as follow:- (i) Applying bitumen primer @ 0.40 Kg/Sqm. (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3.50 kg/Sqm with 100 GSM/Sqm non woven polyster mat as centre core reinforcement , laid with 75mm side over lap and 100mm end over lap sealed and finsihed neat. (iii) 40mm bore GI pipe for Spout pipe length 0.75m.

M & L for broken bricks loose filling with aggregates of gauge 40 to 80mm in sunken protion complete all as spd and dir by Engr-in-charge.

S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia or wire and average width if aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, wooden beads and steel window including welding required at site complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified & as directed.

S & F for 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beding in square not exc 0.5 Sqm in each pane complete all as specified and directed.

All as per item No. 129 above but frosted glass.

Repair to low level flushing cistern PVC or chinaware for making it fully functional and leakproof by replacing the defective parts if required complete all as specified and directed. Note : The parts replaced shall be measured separately as 'Supply only' under respective items here in after.

Supply only PVC syphon kit of low level PVC cistern of any make and model as existing on site

Supply only Syphon of low level cistern of any make and model as existing on site.

Supply only Syphon washers for low level cistern.

Supply only PVC bends 32 mm for WC and flushing cistern.

Supply only adjustment level with hook.

S & F in repair ball valve (float valve) high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (20mm bore dia of pipe ) complete all as specified and directed.

Taking down Rotational moulded polyethylene water storage tank covers complete all as specified and directed.

S&F 1 mm thick glvaniged steel sheet water tank cover sutable for 500 and 1000 ltr water tank fixed with macine screw etc complete all as spd and directed

M&L welding in repairs not exc 2.5 cm in length and not exc 6mm thick complete all as specified and directed.

S & F for welding in repair exc 2.5cm but n exc 5cm in length , thickness of mild steel members to be welded not exc 6mm but not exc 9mm thick complete all as specified and directed.

S&F in repair mild steel PVC coated drapery rods, 25 mm internal diameter including decorative type brackets, clamps including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

Resecuring or easing of door shutters for easy closing/opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed.

S&F in repair mild steel cantilever bracket with necessary length and weight for wash hand basin and sink complete all as specified and directed.

Repair to leakage from junction of CP/PVC bend with EWC & cistern by providing M-Seal complete all as specified and directed.

S&F in repair stainless steel 6 pin wall cloth hanger approx length 20 to 30 Cm fixed with screw & plug etc complete all as specified and directed.

S & F in repairs plastic WC seat cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe or for union and fixed in repairs bore of pipe 20mm, (min wt 92 gms) all as specified and directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or for union, bore of pipe 15mm (min wt 90 gms), complete all as specified and directed.

S & F in repairs vitreous china urinal, half stall type, white (excluding flushing cistern , flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/colour/plaster to match with the existing location spot complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

Supply & fix commissioning and testing of complete power cum starter unit compressing of ON/OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate, fire retardant, UV stabilized power unit internally pre-wired with suitable size copper conductor cable with overload protective device (MCB) complete unit fixed in single polycarbonate housing with inlet & outlet cable port suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 25 Amps load bearing capacity complete all as specified and directed.

Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one No. MCB SP of capacity 25 Amps 240 volts complete all as specified & directed.

Supply and fix in replacement switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed.

Supply and fix in replacement socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed.

Supply and fix in replacement switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed.

Supply and fix in replacement socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.

S&F switch, bell push button, single pole, 5/6 Amps, one way, 230 Volts complete all as specified and directed.

S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed.

Supply and fix in repair hylum sheet of 12 cm x 9cm with necessary cutting and connected accessories all as directed at site

Supply and fix in repair hylum sheet of 30 cm x 30 cm with necessary cutting and connected accessories all as directed at site

M &L rigid non-metallic PVC conduit of size 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, elbows, reducers, bell mouth tube ends & fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

Supply and fix in repair casing caping upto 20mm of size for wire/cable all as directed at site

Supply and fix metal top plug suitable for AC/Geyser Box upto 20 Amps

Supply and fix polycarbonate body plug top of rating 5 Amps.

Supply and fix polycarbonate body plug top of rating 15 Amps.

Supply and fix in replacement lamp holder insulated body with back plate for batten fitting complete all as specified and directed.

Supply & fix in replacement rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed. Make: Anchor Cat No.38284/38660 or equivalent as approved by GE.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 Volts complete all as specified & directed.

Supply and fixing in repair modular cover plate with metal frame (inner and outer) 2 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 4/5 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 6 module for mounting switch and sockets all as specified and as directed.

Supply and fixing in repair modular metal flush boxes 1/2 module all as specified and directed.

Supply and fixing in repair modular metal flush boxes 3 module all as specified and directed.

Supply and fixing in repair modular metal flush boxes 4 module all as specified and directed.

Supply and fixing in repair modular metal flush boxes 6 module all as specified and directed.

Supply and fix bell push modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed.

Supply and fix in replacement switch modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed.

Supply and fix in replacement socket outlet, 6 Amps, modular type, 2 module 230 volts complete all as specified and directed.

Supply and fix in replacement switch modular type, single pole, 16 Amps one module,one way 230 volts complete all as specified and directed.

Supply and fix in replacement socket outlet, 6/16 Amps, modular type, 2 module 230 volts complete all as specified and directed.

Supply & fix in replacement rotory stepped type electronic fan regulator modular type,Single module 120 watt 230 Volts complete all as specified & directed.

Supply and fix in repair fan capacitor of 2.5 mfd for Ceiling Fan all as directed at site.

S & F switch socket combination 2 in 1, 3 pin, 6 & 16 Amp flush type with the accessories required, complete all as specified and directed.

S & F switch socket combination 3 pin, 6 Amp flush type with the accessories required, complete all as specified and directed.

Supply and fixing LED Bulb 12 watt suitable for lamp holder complete all as specified and directed.

Supply and fix LED Bulb 12 W inverter/rechargeable type for lamp holder complete all as specified and directed.

Supply and fix LED Bulb 15 W rechargeable suitable for lamp holder complete all as specified and directed.

Supply and fix LED Bulb 9 W inverter/rechargeable type suitable for lamp holder complete all as specified and directed.

Taking down existing old/ U/S sub main wiring along with fitting/fixtures existing of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc by cement/colour/plaster to match with the existing location spot complete all as specified and directed.

M&L for in replacement of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 1.5 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, complete all as specified and directed.

M&L for in replacement of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 2.5 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, complete all as specified and directed.

M&L for in replacement of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity, complete all as specified and directed.

M&L for in replacement of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity, complete all as specified and directed.

Supply and fixing 20W Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply& fixing LED Batten 20W 3- in -1 light LED Batten (color – cool day light, natural white and warm light) surface/wall mounted with specially designed powder coated aluminium housing complete all as specified and directed.

Supply & fix in replacement, outdoor street light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply & fix in replacement, surface mounting type bulkhead 10 watt LED luminaire with reflector cover electronic driver, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 100 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed .

Supply and fix in replacement MCB DB 4 way sheet metal enclosure triple pole and neutral 415 volts with 200 standard bus bar of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB but with enclosue blank plate complete all as specified and directed .

Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 200 amps rated bus bar 240 volts complete all as specified and directed.

Supply and fix in repair warm white garden LED light complete of make philips vibe pedestal round shape or equivalent of 12W, 230 Volt including foundation all as directed by Engineer-in-Charge at site. Note Design of light will be approved by Engineer-in-Charge

Supply and fixing in replacement miniature circuit breaker (MCB) TPN 40 to 100 Amp, 4 poles, 415V 10KA 'C' curve current carrying capacity in the DB IP-20 as per IEC 60947-3 ISI marked complete with connection testing and commissioning., complete all as specified & directed.

Supply & fix in replacement MCB SPN, 40-63 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

Supply & fix in replacement MCB SP, 40 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.

Supply & fix in replacement MCB SP, 6 to 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.

Taking down existing old/ U/S aluminium conductor wiring along with fitting/fixtures existing of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc by cement/colour/plaster to match with the existing location spot complete all as specified and directed.

Supplying and fixing in repair/replacement 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections uspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core of size 4.0 Sqmm cable flat or circular compele all as specified and as directed by Engr-in-Charge.

M/s Himgiri construction (BID ID -3396887)

M/S MRITUNJAI SHARMA (BID ID -3387525)

M/S KAMAKHYA CONTRACTORS (BID ID -3390509)

SahaDevSingh Constructions (BID ID -3388811)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3389788)

saroj constructions (BID ID -3389871)

M/S APOORVA CONSTRUCTION (BID ID -3388772)