REPAIR/ MAINT OF INTERNAL ELECTRIFICATION FITTING/ FIXTURE AND

Amount

Taking down copper/aluminium point wiring (fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,Light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requiremnt for the following Note:if Cutting & chashing required shall be measured/paid under relevant items. Make-RR/Polycab/Havells.

One light/ceiling fan/exhaust fan point controlled by one way switch 5 amps.

One bell / buzzer point controlled by one bell push

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 2.00 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board as specified and directed by Engineer inCharge. Make-RR,Polycab,Havells

All as per item No 2.00 above but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4Sqmm single core cable on independent circuit as specified and directed by Engineer in Charge. Make-RR,Polycab,Havells

M&L in replacement of point wiring with PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC conduit of suitable sizes of medium grade ISI marked for surface wiring and its accessories, including MS sunken box and hylem sheet of suitable size, ISI marked for housing the switches and sockets,Make-RR,Polycab,Havells for the following :-

One light/fan/exhaust fan point controlled by one nos, one way switch.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board Note:- On ceiling wiring shall be done in existing conduit.

All as per item No. 5.00 here in before but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

S&F in replacement 9 watt LED Bulb suitable for B-22 type holder complete all as.pecified

Taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified

S&F submain wiring alongwith earth wire with 2 run of 4 Sqmm (Main Cable and neutral) and one run of 4 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm dia bore with all fittings accessories all as directed. Make : RR Kable/Havells/Finolex,

S&F submain wiring alongwith earth wire with 2 run of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories all as directed. Make : RR Kable/Havells/Finolex

S&F submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories all as directed. Make : RR Kable/Havells/Finolex Note for item No 9.00 to 11.00 : 2 run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run all as specified.

S&F in replacement of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame. all as specified. Make : Anchor/Roma/Cona

S&F in replacement of modular switch 16 A SP one way 240 volts all as specified.Make : Anchor/Roma/Cona

S&F in replacement modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts all as specified.Make : Anchor/Roma/Cona

S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts all as specified.Make : Anchor/Roma/Cona

S&F modular bell push 6A with Neon 1 module 240 volts all as specified.Make : Anchor/Roma/Cona

S&F in replacement switch piano flush button single pole one way 6 amps all as specified. Make : Anchor/Roma/Cona

S&F in replacement switch piano flush type 15 amps single pole one way all as specified. Make : Anchor/Roma/Cona

S&F in replacement of socket outlet 5/6 amps 2 in 1, 3 pin flush type all as specified. Make : Anchor/Roma/Cona

S&F in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type all as specified. Make : Anchor/Roma/Cona

S&F in replacementceiling rose, 3 phase/ PVC/ polycarbonate isolated body all as specified and directed by Engr - in - Charge all as specified. Make : Anchor/Roma/Cona

S&F in replacement electronic fan regulator modular type 120Watt step type Double Modular as per existing all as specified. Make : Anchor/Roma/Cona

S&F in replacement DIMMER/ STEP type electronic fan regulator flush type 230 volts all as specified.Make : Anchor/Roma/Cona

S&F in replacement electric bell Ding-Dong AC 230 Volt comlete all as specified and directed by Engr - in - Charge all as specified.Make : Anchor/Roma/Cona

Taking down DB of SPN 4/8/12 way type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc.

S&F in replacement sheet metal enclosures for DB's when MCB to be used,SPN double door 240 volt, 12 way with 200 amps rated bus bar. all as specified.Make : Legrand/Standard/Indo Asian/HPL

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar. all as specified.Make : Legrand/Standard/Indo Asian/HPL

S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar. all as specified.Make : Legrand/Standard/Indo Asian/HPL

Taking down MCB type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc.

S&F in replacement of MCCB TPN 160 Amps, 415 Volt suitable for existing loadline DB all as specified. Make : Legrand/Indo Asian/Stanndard

S&F in replacement of MCB SPN 40 to 63 Amp 240 volt 10 KA all as specified.. Make : Legrand/Indo Asian/Stanndard

S&F in replacement of MCB SPN 32 Amp 240 volt 10 KA all as specified.. Make : Legrand/Indo Asian/Stanndard

S&F in replacement MCB SP 40 Amp to 63 Amp 10 KA.240 volts all as specified.. Make : Legrand/Indo Asian/Stanndard

S&F in replacement MCB SP 6 Amp to 32 Amp 10 KA.240 volts all as specified.. Make : Legrand/Indo Asian/Stanndard

S&F in replacement Metal clad enclosure with one MCB single pole, 20 Amps 240 volts. all as specified.Make Legrand/Havells/Indo Asian

S&F in replacement LED light fittings 36 w (2x2ft), 230v recessed mounting 600x600mm complete suitable for false ceilling complete with all accessories pre-wired and including connecting up with twin core wisted flexible copper conductor cable with existing suitable size complete all as spd and directed MAKE : CG/PHILIPS/HAVELLS

S&F LED Tube Light of 18 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified product Code LCTL-18-CDL of crompton or eqivalent in Make :-Havells/Phillips

S&F LED Tube Light of 24/36 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 16 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified product Code LDL-36-CDL of crompton or eqivalent in Make :-Havells/Phillips.

S&F of Endura Linear LED batten of 12 W (2 ft.),extruded aluminium heat sink provided foe efficient heat dissipation & integrated electronic driver in AC complete all as specified. Make: Havells make cat part No. LHEWEBP6PL1W012 or equivalent in CG/GE/Phillips

S&F ceiling secure down light circular shaped recess mounted LED light of 10/14 W complete suitable for existing light fittings cat part No Ceiling secure of Philips or Equalivalent of CG/Havells

Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 12'' including necessary cutting of sheet for fixing switch / socket complete as specified and directed.

Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 5'' including necessary cutting of sheet for fixing switch / socket complete as specified and directed.

Supply and fix only decorative laminated sheet 3mm thick of size 7'' X 4'' including necessary cutting of sheet for fixing switch / socket complete as specified and directed.

Supply and fix only fan capacitor of the following capacity :- (Make : Epcos/ Anchor)

Supply and fix in replacement non metallic rigid PVC conduit medium grade 20 mm dia, ISI Mark complete all as specified and directed. Make : Kalinga premium/ supreme/ finolex

Taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop and carrying out for rewinding, transportation to site, reinstallation and testing complete.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required.

All as per ser item No 47.00 but exhaust fan 230/300 mm sweep

All as per ser item No 47.00 but exhaust fan 400 mm sweep

S&F in replacement ceiling fan Ball bearing of suitable size & model (as per sample). Make:- NBC/ SKF

M&L for replacing U' clamps with rubber reel, bolts, nuts, washers and safety pin ceiling fan of any size/ make

M & L in replacementfor Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete.

S &F of Canopy of Celing fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete.

M&L for spray painting (white colour) with synthetic enamel paint to Ceiling fans/Exahust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc.

M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

S & F fan blade assy 1200/1400 mm sweep white coloure with sqrue complete all as specified.

M & L heating element of 2.0 KW (Rectangle) as required at site including rubber washers (ISI marked) etc complete all as specified and directed Make Venus or As per sample.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank.

M&L for replacement of insulating material (Glass wool) for 25/ 50 litre capacity Geysers all as directed by Engineer -in - charge.

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample).

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample).

M&L in replacement chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed.

M&L in replacement PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI mark all as specified and directed by Engr-in Charge

M&L in replacement safety nut for high pressure release (As per sample).

S&F in replacement non return valves 15mm dia and connecting up complete (ISI marked).as per sample

M&L in replacement top cover for geysers of 25/50 ltrs capacity any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) all as directed.

S&F in replacement bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces all as specified and directed.

S&F in replacement of outer cover for geyser made out of MS sheet suitable for 50 ltrs capacity geyser vertical/horigontal type all as specified and directed.

S&F in replacement of outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horigontal type all as specified and directed.

S&F in replacement thermostat (ISI Marked) for 25/50 Liters capacity Geyser.Make : Daspass/Theeta/TTE

S&F in replacement indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample)

Supply and fix in replacement mild steel hole fastner 10mm dia, 100mm long including nut and washer.

S&F in replacement 9watt LED driver suitable for 9 watt LED bolard light fittings all as spd and directed MAKE : Bajaj/Philips/CG

S&F in replacement LED light fittings 10 watt, 230v recessed mounting round type suitable for false ceilling complete with all accessories pre-wired and including connecting up with twin core wisted flexible copper conductor cable with existing suitable size complete all as spd and directed MAKE : CG/PHILIPS/HAVELLS

S&F in replacement wall mounting decorative globe light fittings made of polycorbonate for 15watt retrofit LED(Spiral base) with LED bulb 9w complete suitable for existing fitting all as specified and directed MAKE: Havells/CG/Philips

S&F in replacement on load 100 Amp changeover switch complete all as specified MAKE : Havells/CG/ Bajaj

S&F in replacement 3/5Watt LED candle type warm white lamp complete suitable for existing lamp all as specified MAKE : Havells/CG/ Philips

S&F in replacement LED Bulb 18Watt warm white/cool day 240 volts all as specified MAKE : CG/PHILIPS/HAVELLS

S&F in replacement 1 modules incl white cover plate complete all as specified

S&F in replacement 3 modules incl white cover plate complete all as specified

S&F in replacement 4 modules incl white cover plate complete all as specified

S&F in replacement 8 modules incl white cover plate complete all as specified

S&F in replacement blanking plate for switch complete wherever required

S&F in replacement 9 watt theread type LED Bulb suitable for existing size complete all as.pecified MAKE : CG/PHILIPS/HAVELLS

S&F in replacement 9 watt jallbi type LED Bulb suitable for existing size complete all as.pecified MAKE : CG/PHILIPS/HAVELLS

S & F C/fan blade suitable for 300/400 mm sweep with sqrue complete all as specified.

S&F in replacement Bulk head fitting of 10watt 230Volts,complete with LED Light10 Watt & all accrssories internally prewired including connecting wup with three core sheathed flexible copper cnductor cable of suitable size omplete all as specified and directed by Engineer-in-charge. Mke -CG cat part no-LBHP-10-CDL,EUUIVALENT IN Havells,Plilips.

Supply&Fixing in replacement light freedom Bldg security light compressing pressure, die cast housing for better aesthetics and thermal management. Comprises of extruded aluminium housing with pre-wired gear tray with LED’s & drive, heat resistant flat glass suitable gasketed for IP65 protection, high grade power coating and fitted with toughened glass with high power LED’s of 40 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia GI pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with PVC mulitistranded copper cable of suitable size complete including taking down existing 40 watt SV/MH lamp fittings all as specified and directed Make - CG freedom+ Cat pt no - LSTS-40-CDL eqivalent to Havells,phillps.

Supply&Fixing in replacement light freedom Bldg security light compressing pressure, die cast housing for better aesthetics and thermal management. Comprises of extruded aluminium housing with pre-wired gear tray with LED’s & drive, heat resistant flat glass suitable gasketed for IP65 protection, high grade power coating and fitted with toughened glass with high power LED’s of 30 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia GI pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with PVC mulitistranded copper cable of suitable size complete including taking down existing 30 watt SV/MH lamp fittings all as specified and directed Make - CG freedom+ Cat pt no - LSTS-00-CDL Equvalent to Havells,phillps.

S & F in replacement MCCB DB VTPN Vertical load line 4 way double door IP 54 "IK 09 cat no 507750 Make Legrand orequivalent or Equivelent Make of L & Tor C&S

Supply and fixing in replacement MCCB, 4 pole, 415 volt of capacity 63 Amp, breaking capacity 25 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, etc. all as specified and directed by Engr-in-Charge Make : Legrands/Schnieder/L&T cat part No 420053

M & L in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected togalvanised iron (strip 25x4mm/wire 4mm) as earthinglead lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 5 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth streep 7.5m will be measured and paid separately)

M & L in replacement For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 25x4mm galvanised iron strip/wire complete all as specified and directed.

M/S ANIL KUMAR

Surjit and Sons