Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹33.9 LAccepted-AOC 1ST FLOOR SIDHARTH TOWER BALTI KHARKHANA BYELNE S J ROAD ATHGAON GUWAHATI KAMRUP ASSAM 781001 | KAMRUP METRO | ASSAM | 781001 | L-1 | Accepted-AOC BEING L1 BID | |
| 2 | L-2₹36.1 L+₹1.7 L (4.95%)Rejected-Finance VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L-2 | Rejected-Finance Being L 2 | |
| 3 | L-3₹36.5 L+₹2.1 L (6.14%)Rejected-Finance VILL RAJARCHAK PO HALDIA PORT DISTT PURBA MEDINIPUR WB PIN 721605 | MEDINIPUR EAST | WEST BENGAL | 721605 | L-3 | Rejected-Finance Being L 3 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I) (CGN) KOLKATA
GE (I) (Coast Guard Navy) Military Engineer Services Damodar Complex Naval Transit Accommodation Hastings, Kolkata700 023
UPLIFTING OF VARIOUS B/R AND E/M INSTALLATION DAMAGED DUE TO HEAVY RAINFALL AND EXCESSIVE FLOOD AT HALDIA UNDER GE(I) (CGN) KOLKATA
2023_MES_597680_1
NIT No 8701/11/2023-2024/05/E8
Open Tender
Civil Works
Item Rate
180 days
HALDIA
AS PER TENDER DOCUMENT
8 documents required · 8 mandatory
₹500
GE (I) (CGN) Kolkata
₹77,000
Yes
12 Jul 2023
23 May 2023
22 Jun 2023
23 May 2023
21 Jun 2023
7 Jun 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness including any pattern roof coverings complete all as specified and as directed.
Supply and fixed 2 mm thick glass fibre reinforced translucent plastics sheeting of any profile, diffusion classification I with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.
Material and labour for pre-painted hot-dip galvalume aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Taking down wooden door shutter area exceeding 1.00 but not exceeding 2.00 sqm each complete all as specified and as directed.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed
Supply and fixed 35 mm thick, timber species of super group and durability class I as per IS 12896: 1990 and first grade as per IS 1003 (Part-1): 2003, factory made, panelled shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board, Grade -I, Type -I (solid core, general purpose), designation (SO GP-I) conforming to IS 3097 supplied and fixed to chowkhats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated.
Supply and fixed 100 mm medium weightstainless steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed.
Supply and fixed aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 250 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
Supply and fixed cast aluminium alloy handle, cast type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.
Supply and fixed aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed
Material and labour for powder coated aluminium frame for doors, windows, ventilators (thickness of powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
Material and labour for powder coated aluminium window and ventilator shutters, slidding type, three track without sash bar, aluminium section (thickness of powder coating not less than 50 micron) weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc. complete all as specified and as directed.
Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately), one way, space n.exc 15 cm complete all as specified and as directed.
Material and labou for reinforced precast cement concrete louvers and jallies, 50 mm thick (measured solid) in cement concrete 1:2:4, type B0, using 12.5 mm nominal size coarse aggregate including all mouldings but excluding frame and fixed in position using cement mortar (1:4) complete all as specified and as directed.
Supply and fixed rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 25 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes and PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm nominal size, minimum weight 455 grams all as specified and as directed.
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 2000 litres capacity hoisted and fixed in position including provision of 25 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes and PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm nominal size, minimum weight 455 grams all as specified and as directed.
Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and providing 20 mm thick cement plaster in CM (1:3) using water proofing compound @ 3 % by weight of cement for filling depression if any to receive water proofing treatment and providing APP modified bituminous membrane water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (not less than 3 kg/sqm ± 5% per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sqm by the same membrane manufacture of density at 25 C, 0.87-0.89 kg/litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints including for applying bituminous aluminium paint @ 0.125 Kg / sqm on finished APP surface complete all as specified and as directed by Engineer-In-charge (Note : WPC shall be measured and paid separately)
Supply only liquid water proofing compound complete all as specified and as directed.
Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for plastering 15 mm thick on fair faces of brick work (on vertical surfaces) in cement mortar 1:4 finished even and fair complete all as specified and as directed.
Material and labour for plastering 15 mm thick on fair faces of brick work (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surface as in ceiling (sunshed, Chajja) in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for cement concrete 1:2:4 type B1 using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed cement mortar in 1:6 complete all as specified and as directed.
Material and labour for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado, skirting (verticle surface) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plaster bed cement mortar in 1:4 complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge.
Material and labour for brick work with fly ash bricks of class designation 7.5 as per IS 12894: 2002, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:8 complete all as specified and as directed.
Material and labour for brick work with fly ash bricks of class designation 7.5 as per IS 12894: 2002, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 in half brick complete all as specified and as directed.
Material and labour 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm nominal size graded stone aggregates finished surface even and fair as in plinth protection all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. omplete all as specified and as directed.
Material and labour for cement concrete in foundation, filling and mass concrete in 1:4:8 type D2, using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
Material and labour for machine cut Kota stone slab flooring 20 to 25 mm thick over cement screed bed of 15 mm thick in cement mortar 1:3, laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Material and labour except stone for machine cut Kota stone slab flooring 20 to 25 mm thick over cement screed bed of 15 mm thick in cement mortar 1:3, laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Material and labour for 20 to 25 mm thick machine cut Kota stone in risers of steps, skirting, dado and pillar laid on backing layer of 10 mm thick in cement mortar 1:3, laid and jointed, pointed with grey cement slurry, mixed with pigments to match the sheds including rubbing and polishing complete all as specified and directed.
Material and labour for preparation of newly plastered surface of wall and providing 2 mm thick plaster of paris putty and finishing the surface even and smooth complete all as specified and as directed.
Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over putty to match the existing surfaces complete all as specified and as directed
Material and labour for preparation of old plastered surface of wall and applying one coats of oil bound distemper complete all as specified and as directed
Material and labour preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a alkali resistance primer complete all as specified and directed. (Upto 4th storey)
Material and labour preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a alkali resistance primer complete all as specified and directed. (from 4th to 8th storey)
Material and labour preparation on old plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a alkali resistance primer complete all as specified and directed. (Upto 4th storey)
Material and labour preparation on old plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a alkali resistance primer complete all as specified and directed. (from 4th to 8th storey)
Material and labour for preparation of new or previously untreated wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Preparation of old or previously untreated steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old painted wood or wooden surfaces, of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old surface of ceiling and applying one coat of oil bound distemper complete all as specified and as directed.
Material and labour for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of alkali resistant primer over putty to match the existing surfaces complete all as specified and as directed
Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified.
Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified.
Taking up or down 25 mm or 32 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified.
Supplying & fixing to walls and ceilings or laid in floors 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Supplying & fixing to walls and ceilings or laid in floors 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Supplying & fixing to walls and ceilings or laid in floors 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Supply and fixed 15 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete
Supply and fixed 20 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete
Supply and fixed 25 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete
Material and labour for 150 mm dia mild steel ERW pipe confirming to IS: 1239 part-I, heavy class (class 'c') including cutting, screwing, welding supporting of pipe etc. cpmplete with forged steel/butt welded fittings viz. Tees, bends, elbows, flanges, reducers, clamps/hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete include painting of pipes, fittings & steel work with one coat of primer and two or more coats of synthetic enamel paint of approved make.
Material and labour for 100 mm dia mild steel ERW pipe confirming to IS: 1239 part-I, heavy class (class 'c') including cutting, screwing, welding supporting of pipe etc. cpmplete with forged steel/butt welded fittings viz. Tees, bends, elbows, flanges, reducers, clamps/hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete include painting of pipes, fittings & steel work with one coat of primer and two or more coats of synthetic enamel paint of approved make.
Material and labour for 80 mm dia mild steel ERW pipe confirming to IS: 1239 part-I, heavy class (class 'c') including cutting, screwing, welding supporting of pipe etc. cpmplete with forged steel/butt welded fittings viz. Tees, bends, elbows, flanges, reducers, clamps/hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete include painting of pipes, fittings & steel work with one coat of primer and two or more coats of synthetic enamel paint of approved make.
Supply and fixed flexible rubber bellows with flange of 150 mm dia of standard size for joining the fire fighting pipe sustain the high pressure upto 16 bar including bolt & nuts, washers and packing complete all as directed.
Supply and fixed flexible rubber bellows with flange of 100 mm dia of standard size for joining the fire fighting pipe sustain the high pressure upto 16 bar including bolt & nuts, washers and packing complete all as directed.
Material and labour for 100 mm dia UPVC pipe Schedule 40 including cutting, screwing, supporting of pipe etc. complete with for fittings viz. Tees, bends, elbows, flanges, reducers, joiner, clamps/ hangers, union, coupler, end cap, reduce bushing,adhesive solution, brass tee etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete.
Material and labour for 80 mm dia UPVC pipe Schedule 40 including cutting, screwing, supporting of pipe etc. complete with for fittings viz. Tees, bends, elbows, flanges, reducers, joiner, clamps/ hangers, union, coupler, end cap, reduce bushing,adhesive solution, brass tee etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete.
Material and labour for 40 mm dia UPVC pipe Schedule 40 including cutting, screwing, supporting of pipe etc. complete with for fittings viz. Tees, bends, elbows, flanges, reducers, joiner, clamps/ hangers, union, coupler, end cap, reduce bushing,adhesive solution, brass tee etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete.
Material and labour for 25 mm dia UPVC pipe Schedule 40 including cutting, screwing, supporting of pipe etc. complete with for fittings viz. Tees, bends, elbows, flanges, reducers, joiner, clamps/ hangers, union, coupler, end cap, reduce bushing,adhesive solution, brass tee etc. including cutting holes and chases in brick or RCC walls/slabs and making good the same complete.
Material and labour for Resilient seated gate valves of 80 mm dia, flanged, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.
Material and labour for Resilient seated gate valves of 100 mm dia, flanged, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.
Material and labour for Resilient seated gate valves of 150 mm dia, flanged, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.
Material and labour for cast iron foot valve, 150mm dia, flanged end and remove the unsv complete all as specified and directed.
Material and labour for cast iron foot valve, 80 mm dia, flanged end and remove the unsv complete all as specified and directed.
Material and labour for cast iron foot valve, 40 mm dia, flanged end and remove the unsv complete all as specified and directed.
Material and labour for flange jointof 200 bore pipe, with new flange (set of two flange) and rubber gasket, nuts, bolts, washer of required size and white lead complete all as directed.
Material and labour for flange jointof 150 bore pipe, with new flange (set of two flange) and rubber gasket, nuts, bolts, washer of required size and white lead complete all as directed.
Material and labour for flange jointof 80 bore pipe, with new flange (set of two flange) and rubber gasket, nuts, bolts, washer of required size and white lead complete all as directed.
Supply and fixed cast iron air valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 50 mm dia complete all as specified and as directed.
Supply and fixed butterfly valve cast iron, PN 1.6, class 125, nominal size 150 mm as per IS 13095: 1991 complete all as specified and as directed.
Supply and fixed butterfly valve cast iron, PN 1.6, class 125, nominal size 100 mm as per IS 13095: 1991 complete all as specified and as directed.
Supply and fixed butterfly valve cast iron, PN 1.6, class 125, nominal size 80 mm as per IS 13095: 1991 complete all as specified and as directed.
Material and labour for flanged reflux valves of single door, swing check type (non return valves) of nominal pressure (PN 1.6) as per IS 5312 (Part 1): 2004, nominal size 100 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed.
Material and labour for flanged reflux valves of single door, swing check type (non return valves) of nominal pressure (PN 1.6) as per IS 5312 (Part 1): 2004, nominal size 80 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed.
Material and labou for flanged reflux valves of single door, swing check type (non return valves) of nominal pressure (PN 1.6) as per IS 5312 (Part 1): 2004, nominal size 65 mm including nuts, bolts, packing sheets etc. complete all as specified and as directed.
Supply and fixed Pressure gauge 0-7 kg rating complete all as specified and directed,
Supply and fixed Pressure gauge 0-14 kg rating complete all as specified and directed,
Supply and fixed 40 mm dia Multi port Valve (SMF/SMS) and remove the unsv complete all as specified and directed.
Material and labou for reverse osmosis micron cartiridge - 20" with housing including taking down existing worn out ones complete all as specified and directed. Make : Gopani/Kemtek India/Multitex Engg or equivalent. Note : Each cartiridge use maximum 20 to 25 days for each installation or as per site requirement.
Supply and fixed High pressure feed pump 2.2 KW/ 3 HP, 3 phase, 440 Volts, 3 m3/ hrs , head 160 mtrs, pressure rating not less than 25 bar, rpm- 2900 including all connecting accessories complete all as specified and as directed.
Supply and fixed Flow meter 0-1200 LPH range including all connecting accessories complete all as specified and as directed.
Supply and Fixed 100 litre Brine Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
Material and labou for Repair/servicing of chemical dosing pump of capacity 2 ltr/hour by opening the pump and checking the all spare parts and replace the defective parts if required and reassembling, testing complete all as specified and directed.
Material and labou for opening top cover of 60,000 ltrs capacity pressure filter vertical type, unloading the filter media form the pressure filter e.g. sand gravels (different sizes) takings out carefully strainer (Push/Thread) from inside bed plate, cleaning the inside bed plate & strainer fixing holes on the bed plate disposal of sand within 100 metere radius from the existing filter plant Preparation of internal surfaces of presure filter by applying two coates of anti corrosive bitumastic paint synthetic enamel lead free paint by using brush over a coat of red oxide primer after scraping,cleaning the rusted surface with the help of sand paper / wire brush, washing the good quality of gravels for re-use and replacing old damaged gravels as required. cleaning the PVC old strainer by concentrated hydrochloric acid for reuse, replacing damaged strainer by new one , and re-installing on existing position complete all as specified and directed. Note- Replacing filter media like sand,gravels,striner shall be measured and paid in separately relevant item.
Supply only PVC strainer as per existing type for pressure filter as per existing size & shape all as specified and as directed.
Supply & charging of new filter sand of 10 x 40 mesh from Barakar layer by layer and new graded gravels of different size inside the pressure filters . (a) Gravel of size 1" x 3/4" (b) gravel of size 3/4" x 1/2" (c ) gravels of size 1/2" x 1/4" as per designed layer to the pressure filters - 175 bags complete all as specified and directed..
Material and labou preparing external old steel surfaces of 60,000 ltrs pressure filter vertical type (i.e. pressure filter- 02 Nos) incl connecting 80/100/150 mm MS/PVC pipe, valves, valve chamber, pump-motor-03 Nos and LT Panel-01 No etc(as per colour reqd) and applying two coats of synthetic enamel paint in existing colour or directed by Engr-in-Charge by spray painting over a coat of red oxide primer after scrapping old paint, cleanning rusted surface with the help of sand paper/wire brush of the complete area at swimming pool plant area including writing by synthetic enamel paint of "PRESSURE FILTER No.1&2.& Cap. 60000 LPH complete all as specified and directed.
Material and labou for cleaning of swimming pool of size 25mx13.5x 1.0mtr to 3.8 mtr depth by taking out sludge from bottom of pools, scrapping out scale from bottom & wall with the help of wire brush forming the washing out wall & bottom by applying Chemical solution switable for swimming pool cleaning, draining out complete sludge materials from swimming pool with the help of pump including writing date of cleaning all as directed. NOTE : All accessories like Pump ,brush, chemical etc for cleaning purpose provided by contractor and price deemed included in the quoted rate.
Supply only heavy weight portable vacuum head made up of SS 304 material with size 32 ft long and 10 inch width and 15 kg minimum weight, as per existing and and double nylon brush and teflon wheel and hook for rope tying for easy movement for suction cleaning cleaning of swimming pool complete all as specified and directed.
Material and labou for Repair/replacement of defective spares of ionisor e.g. knob of display meter including cleaning/ replacing defective copper-silver electrodes of two ioniser chamber of existing size and capacity and suitable functioning of Ioniser panel complete all as specified and directed.
Supply only gas mask and rubber/pvc hand gloves(pair) for water treatment chemicals all as specified and directed by Engr-in-charge complete all as specified and directed.
Supply only swimming pool hard nylon brush (best quality, as per sample) suitable to be fixed on 32/25 mm dia GI Pipe for cleaning of all walls of swimming pool complete all as specified and directed.
Supply only hollow light grade GI pipe of size 25/32 mm dia, 6 mtr long suitable for fixing nylon brush or net complete all as specified and directed.
Supply only dual test kit to visual check pH/Residual Chlorine available with separate test vial with colour comparator and user manual all as specified and as directed.
Supply only phenol red solution for PH test bottle(500 ml) complete all as specified and as directed.
Supply only OT solution for chlorine test bottle(500 ml) complete all as specified and as directed
Material and labou for maintenance of Centrifugal coupled Pump set up to 15 HP capacity after decoupling the pump and motor, auxiliary piping, checking of alingment of pumpset, replacing the flexible coupling, removing the entire housing such as bearing housing, st box housing, delivery casing etc and removing the impeller from the shaft, gland nut, gland, separating shaft etc complete and all the parts should be thoroughly cleaned in Kerosene, Petrol or Benzene to remove the dirt rust etc. After cleaning, all the parts should be thoroughly checked for wear, remount thereafter and applying bearing grease as per manufacturer recommendation, checking gland packing seal, and remounting the pumpset at the position with piping connections complete incl testing to its full capacity. Notes : (i) Minor Parts like gland packing, bearings required to be replaced and labour element involved in replacement is included in unit rate quoted against this item. (ii) Necessary work for realignment such as relocation in such a way that motor and pump shaft match accurately shall be deemed included in the rate. (iii)Bitumen paint to Steel structure and Base frame work sincl in the quoted rate. (iv) Any minor repairs involved to make the motor completely functional, even if not mentioned in this item, shall be carried out by the Contractor without any extra cost to the department.cleaning of stator and rooter including replacement of bearing etc. including testing & commissioning complete all as specified and directed. (v) Replacement of metal coupling and rubber gasket is inlusive in quoted rate.
Material and labou for maintenance upto 20 HP electric motor incl cleaning of stator and rotor, varnishing, replacement of bearings etc. fixing in the same position incl testing & commissioning complete all as specified and directed. Note : Bearings, Coupling and other connecting items incl in the quoted rate.
Material and labou for rewinding upto 15 HP electric motor incl cleaning of stator and rotor, varnishing, replacement of bearings etc. fixing in the same position incl testing & commissioning complete all as specified and directed. Note : Bearings, Coupling and other connecting items incl in the quoted rate.
Material and labou for lifting outdoor LT Panel from existing postion to a suitable height ranging from 1.5-2.5 ft by removing PCC foundation carefully and disconnecting incoming cable and earthing strip and reconstruction of PCC and connection of cable after opening of cable from loop by excavtaion and earthing strip and spray painted of complete panel and MS frame complete all as specified and directed. Note: Quoted rate deemed inclusive of cost of excavation, PCC, foundation, bolts, cable lugs, earthing strip, spary painting and white wash of the foundation all as specified and as directed.
Material and labou for Disconneted to all parts as pumps, motors, pumps MS base, nuts, bolts, pipes, valve etc, Dismatling existing foundation of pumps and again make the new pump fondation in such a way thar pump and motoe alignment zero ( pump and motor shaft is connected with metal coupling with zero angle offsetting), after making new foundation refixing the new MS angle, nuts , bolts etc and refixing the pumpset at the position with piping connections complete incl testing to its full capacity. Notes : (i) Necessary work for realignment such as relocation and replacement of foundation in such a way that motor and pump shaft match accurately shall be deemed included in the rate. (ii) Bitumen paint to Steel structure and Base frame work incl in the quoted rate.
Material and labou Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.
supply and fixed Mini Motor protection relay with in -built Earth fault protection and also protection of overload, single phasing, current unbalance, phase sequence reversal and under current protection upto 15 KW motor with existing panel complete all as specified and directed complete.
Supply, laying & testing flat 3 core PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric cables (Heavy duty) with stranded copper conductor of size 6 sq mm 1100 Volts grade complete all as specified and directed.
Supply, fixed, testing and commissioning of Air conditioning outdoor unit upto 2 TR capacity suitability fitted with existing indoor unit and remove existing unsv unit and rusted stand, nuts & Bolts and after fiited testing complete all as specified and directed.
UNIVERSAL TRADING
KAKOLI ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .