Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹8.4 L
EMD Value
₹16,740
Closing Date
12 Oct 2026, 5:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Anil Mohil
Municipal Council Barwala
Installation of Gym, Jhullas and other maintenance works in Bhagwan Bhagirath Park, ward no 10, MC Barwala.
2026_HRY_551808_1
2026410E1850 6CEE 4B33 BCE3 A6461A474C82345ULB
Open Tender
Civil Works
Works
110 days
Barwala
Installation of Gym, Jhullas and other maintenance works in Bhagwan Bhagirath Park, ward no 10, MC Barwala.
2 documents required · 2 mandatory
₹1,000
₹16,740
Yes
1 Oct 2026
1 Oct 2026
13 Oct 2026
1 Oct 2026
12 Oct 2026
1 Oct 2026
1 Oct 2026 - 3 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom. | 1 | Each | - | - |
| 2 | Basic cost of Supply and Erection of 3Mtr. Decorative Pole with Post Top LED light of 30 watts complete in all respect as per drawing new | 20 | Each | - | - |
| 3 | Supply, erection, testing and commissioning of 3 phase Automatic timer AMSons/LandT/Indoasian/CandD make to ON/OFF the street light on different fixed timing maintainable on street light pedestal, pillar, wall M.S. pedestal where ON/OFF point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp, MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber, and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied material, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Engineer-in-Charge. | 10 | Each | - | - |
| 4 | Supply of PVC sheathed aluminium flexible cable in existing pipe/trench etc. of size 1.5 sq mm 2 core for working voltage up to 1100 volts conforming to IS1554 (Part-1) 1988/7098 (Part-1) with aluminium conductor ISI marked complete in all respect as per standard specification up to the entire satisfaction of Engineer-in-charge (Make: - Grandlay| Havells| KEI or its equivalent)- | 115 | Metre | - | - |
| 5 | Providing and fixing of Shoulder and
Chest Press Combo made up of 4inch B
class GI pipe: Prime Stand duly bend,
Foundation center pipe.The handle frame
is made of 42mm OD G.I. pipe.The
remaining frame is made of 32mm OD
G.I. pipe. Seating frame support of
dimension 250 x 150 x 5mm is welded for
supporting the pedal seat. MS Seat of size
380mm x 300mm x 5mm is used for
supporting the foot. ?? 60mm seamless
pipe bushes. Permanent lubricated Ball
bearings 6205zz/6205-2rs. Foundation
plate of dia ??225mm and 10mm
thickness is welded at bottom. | 1 | Each | - | - |
| 6 | Providing and fixing of Leg Press Dual
equipment made up of 4inch B class GI
pipe: Prime Stand duly bend, Foundation
center pipe.60mm seamless pipe
bushes.Permanent lubricated Ball
bearings 6205zz/6205-2rs.All welded
joint are of good quality.
High quality rubber grip are also used for
firm handling.High tensile steel with
galvanized nut and bolts to be used.The
Circlips to be used are of 25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness. | 1 | Each | - | - |
| 7 | Providing and fixing of Double Twister/
Standing Twister equipment made up of
3inch B class GI pipe: Prime Stand duly,
Foundation center pipe.60mm seamless
pipe bushes.Permanent lubricated Ball
bearings 6205zz/6205-2rs.All welded
joint are of good quality.High tensile steel
with galvanized nut and bolts to be
used.The Circlips to be used are of
25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness. | 1 | Each | - | - |
| 8 | Providing and fixing of Seated Rowing equipment made up of 3inch Bclass GI pipe: Prime Stand duly bend, Foundation center pipe.The pins used are made up of 25mm hardened bright bar.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High quality rubber grip are also used for firm handling.The bushes (Stopper) used to avoid the collision.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm.
Allen Bolts are also used to tighten the closing cap.
Closing cap of HDPE / PPCP Plastic is used.
The powder coating done with Pure polyester powder with 60 to 70 micron thickness | 1 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.77 MB
BOQ_631628.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .