WBIW/EE/BUE004/ eNIT-16/2025-26 SL 03

Cross Bandth :-Supply of empty cement polythene bags in good condition including stacking and carraige cost to site, labour charge for filling gunny bags/polythene bags with all kinds of earth or sand wet or dry including sewing mouth and stacking within a lead of 150 Mtr. and all lifts as per direction of the engineer in charge (Filled up weight not less than 30 kg.)(Measurement to be taken up in stacks), labour charge for dumping filled up gunny bags/Polythene bags in standing or flowing water with or without boats inclusive of placing in position with all leads and lifts complete as per direction of E.I.C.

Supplying to site empty cement polythene bags (capacity 50 kg) in good condition including stacking, incedental charges etc. all complete ( capacity 50 kg).

Labour charge forfilling empty cement gunny bag / polythene bag (capacity 50kg) with all kinds of earth (wet or dry), sand or agreegates (stone/ brick) and sewing as done in case of cement bag,( typing with a knot after filling will not be accepted), and staking within a lead of 30 metre as per direction of E.I.C.( cost is excluding the cost pf any types of filling materials)

Damping in position are sand filled gunny / polybags ( capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

Removing earth/sand filled poly bags/gunny bags from the channel bed/slope and initially depositing the same near channel bank at bed/slope and initially depositing the same near channel bank at a place as directed by the enginner - in charge for measurement of bag & then disposing off the same at a distance not less than 150 metre from the channel site.

Bailing out water by pump including all leads and lifts and including making all arrangements for disposal, where continuous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically ascertained as per direction of the Engineer-in-charge.

Dismantling of damaged embeded part like guide channel/bottom seal beam/top seal beam of gates of canal/river from civil structure as directed by the Engineer-in- charge.The cost of man power employed for dismantling and hire charges of Tools and Plant, scaffolding charges etc. Payment will be made on actual length of Guide Channel.

Fabrication , supply, erection and commissioning of embeded parts consisting of sealbeam, Guide channel with all accessories for vertical gate of canal/river made of MSmaterial consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). Remarks: Cost for civil works to be taken from PWD (R) directorate seperatly.

Seal beam

Guide channel/Guide path/Top seal path

Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting).

Width of Gate shuteer size upto 2 metre

Hire and Labour charges for shuttering with centreing and necessary staging upto 4m using approved stout props and thick hard wood plank of approved thikness of required bracing for concreat slabs, beam and columns lintels, curve or straight including fitting fixing and striking out after completion of work (upto roof of ground floor) (a) 25mm. to 30mm. thick wooden shuttering as per decesion & direction of Engineer in charge.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevent IS code. (i) Pakur Variety

Supplying, fitting & fixing of screw hoisting arangement made of MS bottom plate, top plate, coller with necessary holes on base plate and top plate to accomodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS : 2062 ‐2011/ latest revision, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied seperately.

Supplying, fitting & fixing of top runner by supplying, fitting and fixing of new Mild Steel Channel conforming to IS: 2062 -2011/latest revision with necessary Mild Steel lugs of required length and size by making hole into top of the civil structure and fixing with necessry masonery work with maintaining proper line and level as directed by the Engineer- in-charge. The cost includes cost of materials, man power employed, cost ofm.s materials, cost of civil works along with two coats of epoxy paint over two coats of zinc rich primer.

Supply of Bearing [Bearing no.51111 (SKF)(Thrust bearing)]

Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading.

Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN‐8/EN9/forged Cl‐4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer‐In ‐ Charge. The cost includes cost of material, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloading as per direction of Engineer in charge.

upto length 3 metre.

Supplying, fitting & fixing of C.I wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size hub to accomodate any size of G.M/C.I nut, rim dia 32mm and four nos arm made of minor dia 30mm. & major dia 36mm rod complete or as per approved drawing & direction of the Engineer‐in‐charge.The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like lathe machine, grinding machine, tools & tackles etc including carriage loading & unloading. (a) upto 60 cm dia. Cast Iron Wheel

Painting of embedded parts, all types of gates, stoplogs and barscreen/gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless s p r a y preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts.