Facilities Enhancement Work at Dr. Sampoornanand Sports Stadium, Varanasi Group C- Wrestling and Sports Science Center Equipment Work for NCOE

Wrestling Equipment Work for NCOE Building

Hanging Dummy: Supply & Installation of The UWW Approved Hanging Dummy feature state-of-the-art specifications. Has 5 strategically placed elastic anchor points.This allows angled attacks resulting in multi-dimensional reactions making The SUPLES ATTACKER -2 feel almost human!Can be used to develop advanced skills in all styles of wrestling just like The SUPLES ATTACKER -1! The SUPLES ATTACKER -2 can be used with a gi for real Judo applications such as ippon seoi nage,osoto gari, tai otoshi, and uchi mata!The SUPLES ATTACKER -2 has a much faster “reset” to its original position in order to make speed training more effective! The stability of the 5 elastic anchors makes The SUPLES ATTACKER -2 not just as realistic, but even moreconsistent than a human partner!(Youth Size for athletic 70-130 lbs, height upto 56.5"). Warranty- 3 Years.

Speed Dummy (G/R): Supply & Installation of Speed Dummy is designed to be almost half the weight of the regular throwing dummy. That makes the speed dummy a lot more functional while practicing throws, techniques, and combat fitness movements. - The difference of the stuffing materials makes the speed dummy much more flexible and a lot easier to practice than the traditional throwing dummy that we use for building explosive power and technique. - The arm dimensions are designed with extra length to allow a more convenient hold and grip.is designed to bounce off the mat while throwing. That helps the athlete to quickly reset for the next throw without lifting it every time. Dummy is designed to develop speed and intensity while executing throws. Warranty- 3 Years.

Speed Dummy with Legs (F/S): Supply & Installation of Speed Dummy is designed to be almost half the weight of the regular throwing dummy. That makes the speed dummy a lot more functional while practicing throws, techniques, and combat fitness movements. - The difference of the stuffing materials makes the speed dummy much more flexible and a lot easier to practice than the traditional throwing dummy that we use for building explosive power and technique. - The arm dimensions are designed with extra length to allow a more convenient hold and grip. isa designed to bounce off the mat while throwing. That helps the athlete to quickly reset for the next throw without lifting it every time. Dummy is designed to develop speed and intensity while executing throws. Warranty- 3 Years.

Free Weight Training Platform: Supply & Installation of UWW approved Weight Training Platform: Weightlifting platform training has a measurement of 3 m x 2.5 m. 25 mm thick, high impact rubber tiles with plywood sheet ensures durability and not be Slippery. Warranty- 3 Years.

Bulgarian Bag: Supply & Installation of DURABLE CORDURA MAT’ERIAL WITH REINFORCED STITCHING] The Bulgarian Bag pure LEATHER sandbags feature durable & long-lasting sand bags for weight construction with reinforced stitching for unmatched Canvas sandbags for working out by intense Bulgarian sand bags. The high strength due to double secure stitching & fillers makes freestyle Artifical Leather sandbags for weight outdoors, exercise sandbag. Warranty- 3 Years.

Sled Shot: Supply & Installation of Dimension L x W x H = 40x22x5. This sled push gym equipmen is an excellent tool for improving lower body muscle strength and explosiveness. If you are using sled workout for the first time, it is recommended to search for a professional video movement guide to avoid physical injuries due to wrong movements. Warranty- 3 Years.

Supples Slam Ball: Supply & Installation of Made of durable high-quality vinyl with vented technology. Specially-designed sturdy, easy-grip strap handles to allow comfort and greater DYNAMIC ROTATIONAL exercises during faster and more dynamic training modes. With adjustable & removable handles allow different uses of the SUPLES BALL (even as a traditional medicine ball.) Offered in a wide variety of weight and size options for ANY level of training ranging from world-class athletes to fitness enthusiasts, down to physical education classes and kids. Warranty- 3 Years.

Sports Science Center Equipment Work for NCOE Building

Sauna Bath: - Supply & Installation of Sauna Bath Cabin (10’x 8’x8’) with 18 kW Sauna Heater and Allied Accessories 1. Siberian Pine wood construction 2. The entire frame should be sealed with water proof, fire proof, termite resistant & seasoned plywood. 3. Sauna Floor to be constructed using removable Siberian Pine wood Crate panels of size 2ft x 2ft for easy cleaning and maintenance. 4. Sauna Heater should be with digital microprocessor control panel 5. 12” long and 304 SS Heating Elements 6. Temperature ranges should be up to 60-120 deg. Celsius 7. Safety feature- Smoke Sensors, Safety Circuit, Temperature & Time Cut off 8. Two tier non-skid sitting arrangement with head rest for at least 8-10 persons to sit at one time. Two sliding air vets to be provided on the ceiling for fresh air. 9. Sauna door of size 7ft height and 3ft 3inches of Siberian Pine wood wide with a fire-resistant glass window at the top with ventilation louvers 10. Digital Display with Chorded Remote Control: The unit fixed outside the Sauna room at any convenient location. 11. Auto shut-off: The machine automatically should shut off after maximum 99 minutes of run to minimize the risk if one forgets to switch off the Sauna after use. 12. Time Set: The unit should shut down the machine after the set duration. 13. Display Option: For Time/temp. to see the time or temp inside the sauna room as per choice 14. Panic Switch to be provided inside the sauna room 15. Heater should be protected with asbestos Sheet for fire safety 16. Entire Wiring of the Sauna Room should be done using TEFLON Coated fire safe wires 17. Sauna Room Sensor, SAUNA Accessories like Sauna Stone, water- bucket,ladle for humidification, heater-guard, towel-rack, robe- hooks, light- cover made of pinewood should be the part of the sauna room. 18. Timer, Thermometer & Hygrometer should be fixed in frame made of pinewood 19. An anti-termite treatment should be carried out before installation Included 20. AMC/CAMC Should be included Warranty- 3 Years.

Steam Bath : - Supply & Installation of Steam Machine (18kW) Commercial Grade 1. Room Size- 10’x 8’x8’ 2. Steam Room top to be covered using insulated 8mm thick ACP panel 3. Temperature range 40-60 degree Celsius 4. 100% Safety should be ensured. The steam should not be blocked. 5. Power Saving Mode: Should be enabled to save the electricity. For example, 18kw may be operated on 18 KW / 12 KW / 6 KW 6. Instant Steam: The steam room should be ready for use in less than 20 minutes without depending on ambience temp. 7. Steam Generator outer body should be built with high- grade Stainless Steel 304 grade in 18SWG thickness. 8. Water Tank: Steam generator Inner Tank Made of high-grade Stainless Steel (304)14SWG 9. Auto Solenoid Valve should be there to maintain the water level automatically. 10. The unit should automatically switch off in case water supply is interrupted due to any reason 11. Internal Wiring : All internal wiring should be done with Teflon coated wire that can tolerate the high temperatures & should be fire safe 12. Time Set: The unit should shut down the machine after the set duration. 13. Display Option :Time/temp. mode to see the time and temp inside the steam 14. STEAM DOOR size : 3ft x7ft constructed using Powder Coated Aluminum frame with 5mm thick acid washed heat resistant toughened glass panel opening outwards with special gasket to keep the steam from leaking. A 4” ramp to be provided for differently abled users. 15. STEAM CEILING to be done in ARC shape using 3mm thick ACP sheet with factory protected film on it without any air gaps. 16. DOUBLE TIERNON-SLIP SITTING BENCH constructed using SS Frame covered with treated hardwood Panels of size 1”x3” with 10mm gap between the panels 17. Fully Automated Steam Unit (Auto inlet & Darin) 18. High-Capacity Reservoir -10-12Ltr 19. 12” Long & 304 SS Heating Elements 20. Safety Features –Auto – cut –off & On Pressure lent off 21. AMC / CAMC Should be included Warranty- 3 Years.

Supply & Installation of ECG Machine 12 Lead: - • The ECG should have Best 10 second acquisition. • The frequency should have 300 htz. • The ECG machine should have alphanumeric keyboard for easy patient entry. • The ECG machine should have colour display of more than 2.0 inches. • The ECG machine should have the capability to connect the machine direct to computer or Laptop. • The ECG machine should have the facility to connect via LAN. • The ECG machine should have facility to connect via modem and WLAN. • The ECG Machine should 12 channel lead for Acquisition. • The system should have the facility to transfer the ECG to computer via USB. • The ECG machine should have facility to store at least 25ECgrecords. • The ECG machine should have latest interpretation software. • The system should have the facility to connect the patient cable with RF technology. • The individual patient lead should be change without replacing the whole patient cable assembly. • The ECG machine should have facility to show lead reversal indication. • The ECG machine should have facility to show the impedance to quality check of connection. • The system should have the dedicated software to download the ECG form machine in PDF format. • The system should have US FDIApproved. Warranty- 3 Years.

Supply & Installation of Automated External Defibrillator :- Parameter Specification 1. Operating Mode AED should be fully automatic, quick and simple to use by any layman/user. It should analyze ECG, charge and deliver the shock all by itself (only if required) without operator’s intervention (AED Mode). It should have an easy operation process in 3 steps: START-ANALYSIS-SHOCK 2. Wave Form and Energy Output AED should be based on Biphasic Wave form Technology and should have facility of escalating energy level to 100-200-300-360 J based on patient condition. (Adult and pediatric application should be integrated in AEDs kept at Hospitals inside the colony; automatic pediatric switch when the pediatric electrodes are plugged in 15-30-50 J ) 3. ECG analysis period Continuous ECG Report 4. Shock Delivery Via adhesive pad to be placed on patients bare skin. It should provide intervals in between shocks for performing. CPR as per latest AHA guidelines. 5. Shock to shock cycle time Typically less than 20 seconds between shocks in series. 6. Indicator Indicators/lights are required for intimation of low Battery /Low charge / any services etc. 7. Auditive and visual instructions The AED machine should guide user through both audible and visual text display means of instruction. 8. Capacity Minimum 200 strokes or 4hrs. of operations time 9. Operation Conditions Between 0⁰C - 50⁰C and maximum 95% humidity 10. Motion detection Yes & should also be suitable for use in moving ambulance 11. Self-test scope To be equipped with the most comprehensive series of automatic self-tests of working mode when switched ON 12. Data Documentation ECG signal/Event / Voice recording in memory 13. Data Transfer AED and ECG Data transfer to PC/Laptop 14. Warranty (AED & Battery) Minimum 4-5 Yrs from the date of supply 15. Data Storage First 15 minutes of ECG and entire events analysis decision 16. Battery type Low maintenance Battery power system with minimum capacity of 4 Ah and battery life of minimum 4 yrs. 17. Charging Time Quick charging in less than 10 second to a highest energy level. 18. Accessories - Set of Electrodes – 2 Pairs, - Carry Bag – 1, - AED Preparation Kit – 1, - Wall Unit Bracket – 1, - Instruction Manual 19. Weight (with battery) Maximum 3.5 Kg 20. Approvals & Marking US FDA Approval / European CE Marked /AHA certified 21. Training Kit DVD & Instruction Book with each equipment 22. ECG monitor/display User friendly LCD Screen (display of time, battery, electrode type, text instructions, charging energy level, ECG waveform) 23. Resuscitation guidance AED to be equipped with extensive CPR instructions and accompanying cardiac massage by means of a metronome or a sensor. 24. IP Value Minimum value of IPX4 (Although defibrillation cannot be performed when the patient is wet, it is advised to choose an AED with an IPX4 value, when the possibility arises that the device might be used in rainy conditions.The highest score is obtained by devices that have an IPX5, value, which makes them safe to be used even when being used under a water jet.) 25. Pacemaker detection To prevent possible miss-interpretations with victims that have a pacemaker implanted, these should be detected by the AED. The better devices do detect pacemakers and take them in account when analyzing. Warranty- 3 Years.

Autoloader: - Supply & Installation of Autoloader Collapsible Stretcher 1. Made of Aluminum alloy. 2. Collapsible. Wheeled to slide into the ambulance with ease without damaging the ambulance floor. 3. One person should be able to raise and lower it into an ambulance easily. 4. Provision for head end elevation. Position adjustable backrest for breathless patients from 0 to at least 60 degrees. 5. The raising the backrest is either by telescopic mechanism or any safe mechanism but should not come apart while the head end is raised. 6. Swing down or push down side Railings on either side. Strong enough to prevent patient falls 7. IV fluid holding rod to go with the Stretcher 8. Levers to control front and hind legs to fold while loading the stretcher in to the ambulance 9. Lever to lock & unlock the legs to prevent collapse of the stretcher while standing 10. The wheels should have 120 mm to 150 mm diameter with ball bearings to ensure smooth rolling and ensure maximum comfort to the patient. 11. Locks for the wheels Fixing devices to secure the stretcher in place on the ambulance floor/platform not allowing side to side or vertical movements while on run. Centre lock as per GVK EMRI’s requirement is required. 12. 50 mm thick high density foam mattress with Head rest -up holstered with water proof and fire proof rexin 13. Net weight : 40 Kgs Gross Weight 50kgs 14. Bearing Pressure or maximum load not less than 159Kgs. 15. Product dimensions: a. length Minimum not more than 185 to a maximum 200cms; b. width minimum not more than 50 to a maximum 60 cms; height 85 to 95cms 21. Loading height should match the ambulance floor height. 22. Stretcher should have front and back small sliding wheels. 23. Straps 3 in number to restrain the patient Warranty- 3 Years.

Supply & Installation of Electric Oxygen Concentrator: - Maximum Flow Rate: 5LPM Type of operation: Continuous Flow Type PRODUCT INFORMATION Type of Oxygen Concentrator: Portable Maximum Flow Rate: 5 LPM Continuous flow setting: 0.5 LPM Oxygen Outlet: Single Oxygen Purity: 93% (± 3%) Outlet pressure (psi):5ormore Oxygen Concentration monitor available: Yes Type of operation: Continuous Flow Type Adjustable Air Delivery mechanism: Yes Noise Level (dB): ≤ 40 db POWER SOURCE Power Source: Electrical Operated Average Power Consumption (Watts):≤350 OPERATINGTEMPERATURE&HUMIDITY Operating temperature Range: 12 degreeC to32degreeCorBetter Operating Humidity: up to 95% Operating Altitude: Upto 2000meters or more Warranty in years (Option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue) : 1 year Warranty- 3 Years.

Providing of Ambulance with all complete: - ARAI Mileage (Certified) 19.71 kmpl Top Speed 130 kmph Engine cc (Displacement) 11 97 cc Number of Gears 5-Speed Manual Maximum Power 80.96 HP @ 6000 rpm Maximum Torque 104.4 Nm@ 3000 rpm Ground Clearance 160 mm Kerb Weight 1030 kg Boot Space 275 lltres Fuel Tank Capacity 32 lilres Synopsis Maruti Suzuki Eeco AMBULANCE is an elegant MUV with clear lines and a dynamic design that gives it a timeless appearance. It boasts numerous passenger comfort and safety features that allow riders to travel in comfort. The automobile comes in a variety of colours and is powered by a 1.2-litre petrol engine that gets it through traffic. 2023 Maruti Eeco Ambulance is well-designed, with no frills, giving it a smoother appearance. The engine grille is black with horizontal slats and the brand insignia in the centre. The headlight cluster is angular in design and constructed of transparent lenses. A large air dam keeps the BS6-rompliant engine cool. The bumper, door handles, and OVRMs are all black and the wheel arches are wonderfully sculpted and sports 13-inch steel wheels with radial tyres. Marutl Eeco Ambulance Price, Top Speed & Mileage In India The interior of this trim is done In a two-tone colour scheme. The automobile can easily accommodate passengers, with plenty of leg end shoulder room. The furniture is constructed of high-quality cloth and plastic. The instrument panel is well-designed, with a mix of, analogue and digital Instruments to provide the driver with real-time infonnation about the vehicle. The steering wheel may be tilted, and the front riders have sun visors. It also includes a powerful air conditioner that can be regulated manually. All the seats have adjustable headrests, as well as bottle holders and pockets In the rear to store personal belongings. Maruti Suzuki has equipped the new Eeco AMBULANCE with a 1196cc, 1.2-lltre all-aluminium engine that is i-GPI biofuel technology. This motor is fed by a multi-point injection system and comes paired with a 5-speed manual transmission gearbox. It has 4-cylinders, and sixteen valves and the BS6 engine can chum out a peak power of 72.4 HP at 6000 rpm and yields a torque of 101 Nm at 3000 rpm. Warranty- 3 Years.

Supply & Installation of Fowler Bed: - Technical Specifications of Fowler Bed with side rail 1. Overall Size: Minimum 2090mm L X 920mm W X 600mm H (Without Mattress and Castor). 2. Overall Size Buffer to Buffer: Minimum2140mm L x 970mm W x 600mm H (Without Mattress and Castor). 3. Bed Platform frame size: Minimum2070mm L X 910mm W 4.MattressPlatformSize:1970mmLX790mmWexactlyfittingthefowlerbed;i.e.not over sized neither under sized. 5. Buffer to Handle Length: 2275mm 6. Height: 600mm, fixed 7.Four section 1.2mm(18G)CRCA M.S perforated sheet top for easy breathing of mattress .Back rest section is welded with MS CRCA tube of 25.4mmx1.6mm(16G thickness and Leg Section is welded with MS CRCA tube of 25.4mm x and 1.6mm(16G)thickness for support.The size of perforated hole is having 21mm diameter. 8.Screw mechanism welded with ERW MS tube 31.75mmX1.2mm(18G) is M.S. covermade from dia 38.10mm X 1.6mm (16G) ERW tube. 9.Manual adjustments: Backrest, knee rest through two screwsystemswith thrust bearings individually maneuvered by a single handle. 10. Size of Back Rest: (Overall its clarified that its mentioned under PRODUCT & MANUFACTURIN QUALITY STANDARDS" STANDARD DEVIATION: Allowable up to maximum 5% on all the dimensions as asked in the technical specification of furniture items) a. Overall: 785mm L X 795mm W. b. Only Section: 720mm L X 795mm W. 11. Size of Knee Rest: (Overall its clarified that its mentioned under PRODUCT & MANUFACTURIN QUALITY STANDARDS" STANDARD DEVIATION: Allowable up to maximum 5% on all the dimensions as asked in the technical specification of furniture items) a. Overall: 470mm L X 820mm W. b. Only Section: 380mm L X 795mm W. 12. Size of Leg Rest: (Overall its clarified that its mentioned under PRODUCT & MANUFACTURIN QUALITY STANDARDS" STANDARD DEVIATION: Allowable up to maximum 5% on all the dimensions as asked in the technical specification of furniture items) a. Overall: 610mm L X 795mm W. b. Only Section: 610mm L X 795mm W. 13. Size of Fix Section (Overall/Section): 200mmLx 820mm W. 14. Raised Backrest Angle: 60 to 65 degree. 15. Raised Knee rest Angle: 40 to 45 degree. 16. Back Rest: min 45% of the frame length. 17. Bed frame of rectangular basemade from 60mm X 30mm X 1.6mm (16G) Thick ERW tube shall have proper support. This frame is fitted on H leg made from ERW tubes of diameter 31.75mm X 1.2mm (18G) thick (outer tubes) and diameter 25.4mm X 1.2mm (18G) thick (inner connecting tubes) and MS sheet having thickness 3.0mm (11G). 18. The bottom ends of the H legs are provided with castors with diagonally locking system. 19. The bed has head & foot panels detachable by hand without need of any tool. These heads and foot boards/panels shall be made up of ABS/prelaminated MDF board and mounted with SS304 /MS coated round bracket having size 50mm OD x 48mm ID. 20. There should be four locations on the bed platform to hold stainless steel Telescopic Saline rod having 1.2mm (18G) thick stainless steel outer covering tube with a knob to mount syringe pump. 21. Patient Working Load: 110 kg or more. 22. Safe Working Load: 150 kg or more 23. Finishing & workmanship in the medical furniture is of prime importance and must be of high standard. All corners shall be rounded off so that there shall be no sharp corners and holes shall be burr free, Should have collapsible railing. 24. M.S. tubular parts, linkages, flats are to be In-house, pre-treated/shot blasted and Epoxy powder coated with coating thickness 50 to 100 microns. Accessories: 1. H’ Type legs with 910mm W & 450mm Height: 125mm (5”) dia High Grade Synthetic Body Castors, two with brake, two w/o brake. 2. Telescopic I.V. Pole with 4 hooks. 3.Urine Bag Holder. 4.Chart holder which should be MS made/moulded. 5. Provided with four section 4” thk PU Foam of 40 density covered PVC 6.The Back Rest size is 760mm L X 865mm W X 100mm T, Fix section size is 180mm LX 865mm W X 100mm T, Knee Rest size is 416mm L X 865mm W X 100mm T and Leg Rest size is 620mm L X 865mm W X 100mm T, Mattress cover should be provided which is water resistant and fire retardant. General Requirements: The quoted model should be “USFDA approved (Device listed with registration under valid FEI number /CFG)” OR “EU-CE approved and CE Marked” OR “BIS certified conforming to the standard BIS specification specifically for the quoted item and ISI marked with valid CML number.” 2. The manufacturer of the quoted product should have EN ISO 13485 certificate issued from a notified body OR ICMED 13485 (with or without plus) certificate issued from certification bodies accredited by NABCB OR ISO 13485 certificate issued from certification bodies accredited by NABCB/Nationally Recognized Accreditation Board under IAF MLA. 3. Manufacturer must have ISO 14001 certification for Environment friendly features. All stainless steel material used in the medical furniture items must be made up SS 304 grade and should be supported by stainless steel grade certificate duly mentioning the chemical composition from any Govt. approved testing laboratory or NABL accredited laboratory which are accredited as per ISO 17025. Copy of previous test report should be furnished in technical bid as well as during supply. 4.The thickness of epoxy powder coating in all the items must be 50 to 70 micron. 5.All the stainless steel material asked in different hospital furniture must be of SS 304 grade. Warranty- 3 Years.