Special repair to JCOs/ORs Md Accn bldg. No 220/1-12 at RT line under GE (West) Jalandhar Cantt

Amount

Taking down chowkats or frames with shutters (without taking of shutter from the frame)of any description alongwith fittings area n.exc 1.5sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings area exc 1.5sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description but exc 1 sq. m and not exc 2 sq. m each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 sqm each and refixing in same opeining after repairing complete all as specified and directed.

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock striking plate of size 165 x60mm complete all as specified and directed.

S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm complete all as specified and directed.

M&L for PCC type B0-1:2:4 using 12.5mm graded aggregate as to fix pressed steel frame, hold fasts and similars articles complete all as specified and directed.

M&L for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion with cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required,built in cement motar in brick wall, depth of embedded portion of holdfast exc half brick but n exc one brick complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M. S Square tube, fixing in opening as per manufacturer's instruction.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel with wood free EPS design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face and fixing in frame at site as per manufacturer's instruction.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, wire cloth, grills & painting shall be measured & paid for separately.

All as per srl item No. 11 here in before but of gauged shutter. Note for item No. 11 & 12 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

S&F 2nd class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). complete all as specified and directed.

Supply and fix 35mm thick 2nd class hardwood plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, comercial type on both side complete all as specified and directed.

Supply and fix mild steel bright finish or electro galvanised 30mm width of flap continuous (piano) hinges fixed with screws complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average erage with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe 410 (or) Fe-310-0 complete all as specified and directed.

S&F small fittings such as brackets of any type, latch and hings blocks, shaped door and window stops and the like articles n.exc 200 cu.cm each in 2nd class hardwood including 50mm long medium weight butt hinges complete all as specified and directed.

Supply & Fixing 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.

S&F mild steel barrel tower bolts 200mm long, stove enamelled black, with bright bolt complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.

S&F 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 250mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified.

S&F mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F hasp and staples100mm size aluminium anodised safety type with mild steel hinge pin including bolt to hinge plate with screws complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm complete all as specified and directed.

S& F 1mm thick stainless steel hollow curtain rod with brackets and side doom fixed with all necessary drilling/fixing wooden/plastic cleats in wall complete all as specified and directed.

M & L for glazed ceramic coloured tiles (300 x 450x 7) mm on vertical wall surface , set and jointed in neat cement slurry and pointed in white or coloured cement to match with surrounding surfaces over and including 10 mm thick rendering in cement mortar 1:4 incl dismantling tiling, cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (squre/rectagular) area of each tiles exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with surrounding surfaces including over 15 mm thick screed bed in cement mortar 1:6 incl dismantling tiling, cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (squre/rectagular) area of each tiles exceeding 0.11 Sqm but not exce 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with surrounding surfaces including over 15 mm thick screed bed in cement mortar 1:6, incl dismantling tiling, cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M &L for coloured chequered cement concrete tiles 25cm x 25cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and incl 15 mm thick screed bed in CM 1:6 and dismantling tiling, cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

Taking up or down 15 mm GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm GI tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing 15mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20 mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S & F GI tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 15 mm bore complete all as specified and directed.

S & F GI tube 'medium grade' galavanised, with all fitting and fixed complete to walls and ceiling etc 20 mm bore complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

M & L for HDPE rotational moulded polyethylene water storage tanks of capacity 500 Ltrs (cylindrical vertical with closed top, ISI marked ) triple layer white or black colour of ISI marked, hoisted and fixed in position all as specified in SSR Part I including dismantling old water tanks and removing to store complete all as specified and directed.

S & F ball brass valve, high pressure, with polythene float and fly nut complete, screwed iron pipe brass ferrule and fixed 20mm bore dia of pipe complete all as specified and directed.

S&F 15mm dia bib taps cast copper alloy , fancy type chromium plated, crutch or butterfly handle scewed down for iron pipes or for brass ferrule complete all as specified and directed.

S&F 15mm dia pillar taps cast copper alloy, fancy type with capstan heads chromium plated scewed down high pressure with long scrwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F 15mm dia stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 20mm dia brass stop valves with screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

M & L for PVC connection 15 mm size with PTMT nuts and of length 450mm long complete all as specified and directed.

S&F in repair swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mm size ,195 mm long with bend of 45 degree with flange of PTMT any colour fixed complete all as specified and directed.

S&F vitreous china water closet (Squatting pattern) "Orissa Pattern" size 580x 440 mm white with cast iron 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) including taking out old one and fixing with soil waste pipe etc complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity with complete accessories PVC flush pipe, over flow pipe complete complete all as specified and directed. Note : Colour shall be as approved by GE

S&F vitreous china wash basin white flat back size 550x400mm including cutting for and pinnning in ends of brackets or erecting stand but exclusive brackets and 32mm waste coupling and waste pipe fixed in repairs complete all as specified and directed.

Supply in fixing in repairs sink made Stainless steel sink1mm thick kitchen or laboratory with plugs, washer and wastes pipe , including bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union pipe, over all size 495 x 420 mm bowl size 410mm x330mm x160mm complete all as specified and directed.

S&F stainless steel towel rail 600mm long with brackets fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) including taking down old one complete all as specified and directed.

S&F 5.5mm thick toughened glass shelf of size (450mm x 200mm ) with chromium plated bracket guard and railing incl fixing arrangment fixed with and including chrominium plated brass screws and wooden/plastic cleats (minimum weight 300gm) complete all as specified and directed.

Dismantiling of cast iron or reinforced concrete/ PVC drain pipe of dia 100/75mm jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

Material & labour for cast iron soil, waste and vent pipe of bore 100mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches complete all as specified and directed.

Material & labour for cast iron soil, waste and vent pipe of bore 75mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches complete all as specified and directed.

S&F CI bend (any radius ) with duck foot or heel rest of 75mm bore complete all as specified and directed.

S&F CI bend (any radius ) with ducks foot or heel rest of 100mm bore complete all as specified and directed.

S&F CI branch pieces single ( equal or unequal), ordinary or inverted with parallel branch of bore 100mm complete all as specified and directed.

S&F CI branch pieces single ( equal or unequal, ordinary or inverted with parallel branch of bore 75mm

S & F cast iron vent cowl suitable for 75 mm bore pipe complete all as specified and directed.

S & F cast iron vent cowl suitable for 100 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber joints fixied in trenches 110 mm bore fixing in repair complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors) beams staircases landing chajjas and similar suspended work complete all as specified and directed.

Demolition of unreinforced cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for precast cement concrete in man hole covers, chullah hoods, chajjas etc using type B1 concrete mix 1:2:4 with 20 mm graded aggregate and set in cement mortar 1:4 complete all as specified and directed.

M&L for 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and directed.

All as per item No. 72 above but 6mm to 8mm dia quality conforming to Fe-410 complete all as specified and directed.

M&L for baroda green marble (of any type) work 20 mm thick (table rubbed and polished) as in steps, cooking plat forms and the like,in cement mortar 1 : 4 including painting in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite etc, incl roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust over and including 15mm thich screed bed in CM 1:6 complete all as specified and directed.

M &L for cement concrete 50 mm thick, type C-2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protection complete all as specified and directed.

M & L for 25mm thick cement concrete flooring type B-1, 1 :2 :4, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M& L for cement concrete type E-2, 1:5:10 using 40mm graded aggregate in foundations filling and mass concrete as in sunken floor complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:3 with using 3% WPC as in sunken portion complete all as directed. Note: WPC shall be measured and paid separately.

M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per square mtr including cleaning surfaces complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc but including facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

M & L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L for brickwork with subclass `B' bricks, straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint , hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering in CM 1:3, 5mm thick as in ceiling on fair faces of concrete surfaces finished even and smooth as specified and directed.

M & L for applying a coat of white wash on wall incl preparation of old plastered surfaces of wall complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying 3 coats of white wash on ceiling surface complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surfaces and applying three coats of white wash on ceiling including preparation of old plastered surface complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of chalk whitening complete all as specified.

M&L for complete removal of existing treatment on wall and applying two coats of Oil bound distemper (white or tinted) over and including one coat of thin layer of putty , on plastred surfaces, preparatory to distempering on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M & L for applying two coats of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 cm girth or width all as directed by the Engr in charge.

M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 cm girth or width complete all as directed by the Engr in charge.

M & L for applying two coats of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm girth or width all as directed by the Engr in charge.

M & L for applying one coat of synthetic enamelled paint including preparation of old decorated steel surfaces of any description not otherwise described over 10 cm girth or width all as directed by the Engr in charge

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified.

M&L for brushing neat cement slurry with 3.0 kg of cement per sq m including roughening, cleaning and washing down with water before application of cement slurry complete all as specified.

M&L for cement concrete 40 mm thick type B-1 1:2:4 (using 20mm grade aggregate) as in leveling coarse complete all as specified and directed.

M & L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per Sqm including cleaning surfaces over and including applying primer bitumen coat @ 0.30 kg per sqm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick and 1m width reinforced with polyster non woven fabric ( wt not less than 150 gms/sqm) laid on primed surface by forced application with lap length 10cm complete all as specified

M & L for 40mm thick brick tiles laid over and including 15 mm thick bedded in cement mortar (1:6) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per item No. 101 above but except tiles complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 to brick tiles laid flat on roof including cleaning the surface with water and racking out joints complete all as specified and directed.

M & L for 32mm dia GI pipe bevelled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface incl dismantling the existing pipe of any diacomplete all as specified and directed.

M&L for repairing of R.C.C projections, chajjias, roofs, facia etc by necessary preparation. Scrapping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh (If reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and directed by Engr-in-charge. (Note : Welded mesh measured and paid seperately)

S&F110mm PVC (SWR) bends complete all as specified and directed.

S& F cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F stainless steel plate rack 1mm thick of size ( 750x750x250mm) grade of sheet shall be 304 AISI incl fixing arrangment with mild steel nut and bolts including drilling and fixing wooden/plastic cleats complete all as specified and directed.

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc complete all as specified and directed.

Supply only integral water proofing compound conforming to IS-2645 complete all as specified and directed.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per srl item No 112 here-in-before but 3 pin switch socket combination, 5 Amps on independent board complete all as specified and as directed

All as per srl item No 112 here-in-before but for 3 pin socket outlet, 5 Amps on same board complete all as specified and as directed

All as per item No. 112 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board, complete all as specified and directed.

Taking down U/S submain wiring of any size as directed by Engr-in-charge.

M & Lf or submain wiring of two single core 6 Sqmm PVC insulated copper FRLS drawn through and including 25mm dia PVC rigid concealed conduit and conduit accessories and 6 sqmm PVC insulated copper wire for continuous earth continuity conductor complete all as directed by Engr-in-charge.Note : Two runs of 6 sqmm and one run of 6 sqmm including 25 mm dia PVC conduit shall be measured as one unit.

Supply and fix switch piano flush type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed.

Supply and fix socket out let multi purpose 5 Amps 5 pin flush type complete all as specified.

Supply and fix switch socket combination outlet universal type, 6 pin 5/15 Amp 230/250 volts, AC with ISI marked multi pin on independent board complete all as specified.

S & F for batton holder insulated body including 9 watt LED lamp all as specified and directed.

S & F ceilling rose surface type bakelite 65x50mm three terminal all as specified and directed

Taking down main switch/DB of any size and making good disturb surface of wall/floor complete all as specified and directed

Supply and fix DB, double door SPN 8 way for MCB 240 Volts with 200 Amps rated bus bar complete all as specified and directed.

Supply & fix MCB, 32 to 63 amps SPN 240 volts, B series complete all as specified and directed.

Supply & fix MCB, 6-32 amps SP 240 volts, B series complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4mm dia connected to earth plate earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the site of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed.

Supply & fixing in replacement LED batten light fitting 20 W (double side) output with surge protection of 4KV with voltage band of 140-280V CRI-6500K (White light) fixture box type with retrofit LED rod 20 watt with 2100 lumen and connecting to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core complete all as specified and directed by Engr-in-Charge. Make : LED batten light cat part No. havells LHEXBLP7PN1W020 & Tube rod cat part No. LHLDCLXNUL8X020 OR equivalent make as per group 1 of Appx 'B'

Supply & fixing in replacement LED street light fitting 25 W including LED lamp pressure die cast aluminium IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core incl bracket and fixing complete all as specified and directed by Engr-in-Charge Make: Havells Cat Part No ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent of group 1 as in Appx 'B'

Taking down and refixing of serviceable fittings complete all as specified and directed.

M/S Kuldip Construction Co.

KARTIK BUILDERS

NATIONAL BUILDERS