Spl repair to bldg No T-42 (01 to 08 Qtrs) OR Md Accn at Bana Singh Enclave under AGE B/R-II at Tibri Mil Stn GE Gurdaspur.

M&L for removal of existing treatment ,all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air, roughening and cleaning the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/cracksand enhance the adhesion of the coati(a) applying first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12 Hrs. Apply second layer of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5 hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers instructions. (Note : Application of water proofing treatment will be done by authorised applicator only).

M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring complete all as specified.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level.

M&L for 50mm thickness of cement cocnrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection without using extra cement.

Dismantling floor hearth or wall tilling including cement mortar bedding removing rubbish off the premises.

M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including on 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured, light shade cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

M&L for ceramic glazed dark shed coloured tiles of size 0x300x7mm thick joint free on and incl 10mm thick screed bede in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/dado complete.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc.