Special repair to bldg No. P-268 JCOs/OR MD accn at CME

Amount

Dismantling of single layer Mangalore Pattern roof tile laid dry complete all as specified and directed

All as per item No.1 above, but bedded in lime or cement mortar complete all, as specified and directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spacing exc 15 cm complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F rolled sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed.

S & F For 6 mm thick ms plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc. complete all as specified and directed.

M & L preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frames) exc 1.5 but n. Exc 4.00 sqm each and removing from site complete all as sepcified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frames) n. Exc 1.50 sqm each and removing from site complete all as specified and directed.

S & F powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Aluminium cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and as directed. Note Size of aluminum sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.

S & F Aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 4 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc. complete all as specified and directed.

M&L for framed work such as grills or grating etc with ends of bars shouldered as framed guard bars conforming to Fe-410-0 or 310-0 all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube etc all as specified and as directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S& fix factory made plain framed flush shutters 35mm thick of 2nd class hard wood) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as spfd.

S& fixed 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as spfd and directed .

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred,put together with glue pinned at joints etc. complete all as specified and directed

M&L for preparing new surface of wood of any decription , not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all, as specified and directed.

S & F Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed.

M & L Cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as spd.

S&F 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed.

S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as spd .

M&L 200 mm aluminium anodised, barrel tower bolts of extruded section and fixed

M&L 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 125mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F For 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or offering credit as per schedule of credit all as directed.

All as per item No 35 above, but 20mm bore

All as per item No 35 above, but 50mm bore

S&F 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specifeid and directed.

Refixing 15mm bore old steel water tubing obtained from Sl item No.35 hereinbefore & connection in new or old position of wall, ceiling, floor etc all as specified and directed

S&F 20mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specified and directed.

Refixing 20 mm bore old steel water tubing obtained from Sl item No.36 hereinbefore & connection in new or old position of wall, ceiling, floor etc all as specified and directed

S & F 50mm medium grade galvanised steel water tubing with all ffitting and here complete to walls or cube or lail or floor all as specified and directed.

M& L Cutting chases, pinning in stone concrete black or slab , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth etc. complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed

S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including bracket and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.

S&F in repair brass chromium plated two way bib cock fancy type, 15mm bore ( min Wt. 550 grams) of approved make by EIC/ GE etc.complete all as specified and directed.

S & F brass chromium plated, 15 mm bore health faucet, ( flexy type) 1.00 mtr. Long of approved make by EIC/GE etc. complete all as specified and as directed.

S&F in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F PVC in repair connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair 15mm dia stop valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed.

S & F in repair overhead shower 100 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or unionall as specified and directed by Engineer-in Charge.

S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) bend any radius complete all as specified and directed

S&F in repair 75mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

M&L in repair 75mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) bend any radius complete all as specified and directed

S&F in repair 110 mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

M&L in repair 110 mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair stainless steel sink , made out of 1.00 mm thick sheet for kitchen with plug, washer pipe cast iron cantilever brackets, connecting union overall size 495x420mm bowl size 410mm x 330mm x160mm all as specified and directed. Make: Nirali/Diamond/Blue King/Kingston/

S&F in repair Brass chromium plated tubular towel rail, 20mm dia , D type 60cm long between flanges complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stain steel bracket guard of suitable size and railing 45 cm long etc. complete all as specified and as directed.

S& F in repair stainless steel soap dish holder complete fixed to wall as specified and directed by Engr-in-Charge. Make : Cera or equivalent of Jaquar/ Seiko Industries/ Zoloto

S&F Toilet paper holder with flap stainless steel make jaquar or equivelent etc. complete all as specified and directed.

S& F in repair Brass CP mixer for mixing hot & cold water screwed down for15 mm size iron pipe and fixed all as specified and directed.

S&F in repairs 19/20mm dia MS pipe powder coated of approved colour as in decorative type curtain rods all as specified and directed.

S&F in repairs brackets powder of approved decorative type suitable for fixing curtain rods of 19/20mm dia pipe incl fixing screws, drilling etc as per sample approved by Engr-in-charge all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floors and pavings not exceedidng 15cm thickness (below or above ground level) all as specified and directed.

M&L for 75mm thick PCC type D2, 1:4:8 using 40mm graded sone aggregate as in sub base etc complete all as specified and directed

M&L for 25mm thick PCC type B1, 1:2:4 using 20mm graded stone aggregate as in sub base etc complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor/ wall finishes in CM 1:6. all as specified and directed

M & L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M & L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed.

M& L For rendering 10mm thick cement mortar in 1:4 as in backing coat complete all as specified and directed

M & L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350mmx250mmx7mm /450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed,

Dismantling stone slab and tiles of any description and thickness as in floor including cement mortar bedding and rubbish off the premisses complete all as specified and directed.

M&L machine cut cuddappah stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M& L For 20 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed..

Rounding to edges of stone slabs, such as in steps, cooking plateform, and other similar situation complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 85 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement to match complete over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed.

Racking out joints/pointing to random rubble masonry, polygonal rubble uncoursed or brought upto course complete all as specified and directed.

M&L Keyed pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto complete all as sepcified and directed.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water all as specified and directed.

M&L rendering 15mm thick on stone masonary surfaces in CM 1:6 finished even and smooth over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 complete all as specified and directed.

M&L rendering 15mm thick on concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified and directed.

M&L rendering 5mm thick on ceiling surfaces in CM 1:3 finished even and smooth etc complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces on wall surfaces and applying two coats of cement base paint complete all as specified.

M&L preparation of newly plastered or unplastered surfaces on ceiling surfaces and applying three coats of white wash etc. complete all as specified.

Demolition of brick or stone/boulder masonry, built in cement mortar including all quoins, aarches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L precast solid block masonry of block 1:3:6 type C-1 using 20mm graded stone aggregate in wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coat of Oil bound distermper white or tinned over one coat of primer on walls, etc all as specified and directed.

All as per item No 98 above, but two coat of cement base paint without wall care puttycomplete all as specified and directed.

All as per item No 98 above, but two coat of white wash etc.complete all as specified and directed.

Dismantling water tanks and removing to store capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed.

S&F For 1000 ltr. Capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed.

M&L 20mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm, cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction including taking down old ceiling Make of GI Grid work : Armstrong/Swastik/Techno Grid Make of 'E' board : Everest/Indian Gypsum/Armstrong or equivalent approved .

M&L 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , including wooden frame work and wooden beading fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed.

Extra over rates of block board or veneered particle board for external teak wood 18/19mm lipping 6mm thick fixed with nails

S & F 30mm Width of flaps (when open) in Continuous (piano) hinges mild steel, bright finish or electrogalvanised all as specified and directed.

M&L cement concrete type E-2, 1:5:10 (40 mm graded stone aggregate) lean concrete as in sunkun floor for filling etc. complete all as specified and directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sunkun floor complete all as specified and directed.

M&L 15mm thick plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral WPC all as specified and directed.

M&L bitumen blown any grade applied hot, two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed.

M&L Polythene film black 50 micron laid in floor complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

Taking down unserviceable/old ceiling fan/exhaust fan any size or any type and deposited to AGE E/M store for repair complete all as specified and directed. Note: Old ceilings fans to be depoisted in AGE E/M store yard with list.

Taking down old single phase electric meter and deposited to AGE E/M store complete all as specified and directed. Note : Quarter wise last meter reading shall be noted by the contractor and submitted in proper format to AGE E/M office.

M&L for point wiring for with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No.119 above, but for one multipin 5 amps socket outlet on same board.with other switch

All as per item No.119 above, but for one multipin 5 amps socket outlet on independent board.

All as per item No.119 above, but for One light point controlled by two 2 - way switches

All as per item No.119 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

S & F switch piano, flush type, single pole one way 6 amps complete all as specified and directed.

S & F switch piano, flush type, single pole one way 16 amps complete all as specified and directed.

S & F bell push flush type single pole one way 5 amps complete all as specified and directed.

S & F switch piano, flush type, two way 6 amps complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 6 amps flush type complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin, 16 amps flush type complete all as specified and directed.

S & F ceiling rose, 3 phase PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S & F in replacemnet Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed.

S&F Decorative ultra slim with aluminium housing high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 22W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make : Shakti/ Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F Decorative ultra slim with aluminium housing high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make : Shakti/ Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S & F in repairs LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Shakti/ Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

Supply and fixing in repairs LED bldg security light 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

M&L for sub main wiring with two run of 6 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC casing caping not less than 20 mm wide of desired colour not less than1.2 mm thick and 25 mm wide & 6 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

S&F in replacement MCB distribution board double door 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down old unserviceable one.

S & F in replacement MCB SP 6 to 32 Amps,10 KA,B curve ,230 V AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 40 Amps,10 KA, B curve,230 V, AC incl taking down old unserviceable one complete all as specified and directed.

M & L for earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iron wire 4 mm dia as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 15 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC 1:3:6 type C1 earth chamber of outer dimension 54 x 54 x 30 cm and internal diamension 30 x 30 x 30 cm with RCC 1:2:4 type B1 cover reinforced of size 54 x 54 x 10cm with 6mm dia mild steel round bar @ 15cm c/c both way and 8 mm dia mild roud bard handle adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site all as specified in plate No 3 of SSR Part-I including taking down old unserviceable earting complete and directed by Engr-in-Charge.

M&L in replacement of LED lamp 9 watt complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S & F exhaust fan Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site also arrangement to mount the fan as per requirement complete all as directed by Engr-in-Charge.

S & F exhaust fan 250 mm sweep PVC body, 230V with blades and frame with louvers complete including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site also arrangement to mount the fan as per requirement complete all as directed by EIC..

Taking down electric water heater (geyser) of any 25/50 ltr capacity and refixing the same after repair alongwith connected accessories such as PVC connection pipe, fastner etc complete all as specified and directed.

Supply, install in replacement indoor type LT panel board wall mounted self supporting compartmentalised design of suitable size to accommodate the LT switch gears & other accessories suitable for 440 volt 3 phase 4 wire made out of 2.0mm CRCA sheet powder coated having gasketed front two hinged doors with locking arrangement including bottom and top detachable gland plate complete with suitable size of rust proof nuts bolts and washers etc complete with mounting accessories.The distribution box shall be provided with separate compartments for each MCB with double stud hinged door, front openable . The distribution box shall be fixed on wall with 4 Nos anchor fastner etc. including the following items :-

S&F in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for the following sizes:-

20 mm bore.

15mm bore

50 mm bore.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying /removing of cable all as specified and directed.

Soft/loose soil

Hard/dense soil

Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25 cm complete all as specified and directed.

Removal of surplus excavated spoil to distance n exc 50 metre and depositing where directed at a level not exc. 1.5m above the starting point all as specified and directed.

Sunrise Traders

Mukund Engineers and Contractors

vishalconstruction

N AND G CONSTRUCTION

Aishwarya Constructions

Akash Constructions

M/S SANDEEP CONSTRUCTION COMPANY