REPAIR/ REPLACEMENT OF LT PANELS AND ALLIED WORKS AT OLD CANTT ALLAHABAD.

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft / loose soil including bottom surface to required level or slope for laying of cable complete all as specified & directed.

Returning filling in excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm depth in soft / loose soil complete all as specified & directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material & Labour sand cushioning with dry local sand [unwashed] for protection of under ground cable (8 cm before laying and 15 cm after laying the cable) in trenches and consolidated complete all as specified & directed. NOTE : Punned thickness 18 cm only shall be considered for payment.

Material & Labour for sub class ‘B’ common burnt, bricks old size, designated '75', laid dry, flat with width equal to length of bricks as cover / laid over the cable for protection of under ground cable complete all as specified & directed.

Supply & Fixing for GI pipe 40 mm bore 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall / pole or laid in trenches under road crossing including taking down old existing pipe complete all as specified & directed. NOTE : Excavation, earth work, cushioning & protection work shall be measured & paid separately.

Supply & Fixing for GI pipe 50 mm bore 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall / pole or laid in trenches under road crossing including taking down old existing pipe complete all as specified & directed. NOTE : Excavation, earth work, cushioning & protection work shall be measured & paid separately.

Supply & Fixing for GI pipe 80 mm bore 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall / pole or laid in trenches under road crossing including taking down old existing pipe complete all as specified & directed. NOTE : Excavation, earth work, cushioning & protection work shall be measured & paid separately.

Supply, laying, jointing, commissioning & testing for 16 Sqmm, 4 core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, laying, jointing, commissioning & testing for 25 Sqmm, 3½ core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, laying, jointing, commissioning & testing for 35 Sqmm, 3½ core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, laying, jointing, commissioning & testing for 50 Sqmm, 3½ core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, laying, jointing, commissioning & testing for 70 Sqmm, 3½ core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, laying, jointing, commissioning & testing for 95 Sqmm, 3½ core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, laying, jointing, commissioning & testing for 120 Sqmm, 3½ core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, laying, jointing, commissioning & testing for 185 Sqmm, 3½ core XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old cable complete all as specified & directed.

Supply, Installation, testing and commisioning in repalcement LT panel board 415 Volt 4 wire AC 50 Hz hutted roof cubical 3.15 mm thick CRCA sheet and angle iron of size 50x50x6 mm, 500 mm long factory fabricated powder coated paint out door [Kiosk] type feeder pilalr box weather and vermin proof of size 1300 mm x 1200 mm x 450 mm depth, dust & vermin proof, having degree of protection IP-43 with front openable doors and locking arrangement & locks 50 mm dia godrej make with duplicate keystwo earth terminals suiatable cable glands for all Incomming & Outgoing cable removable neutral link connecting strip / solid feeder pillar box 600 mm above ground level by providing 900 mm longangle iron of size 50x50x6mm welded on all the four corners embeded in PCC1:2:4 using 20 mm crushed stone aggregate up to 300 mm comprising of following accessories / component :-- Note : All connection from bus bar will be copper Insulated strip of suitable size & Insulated support. Make : ITE Gurgaon, Asian, Pride, Universal, Shalabh Make of MCCB : L&T / Schneider / ABB / Legrand

Supply, Installation, testing and commisioning in repalcement LT panel board 415 Volt 4 wire AC 50 Hz hutted roof cubical 3.15 mm thick CRCA sheet and angle iron of size 50x50x6 mm, 500 mm long factory fabricated powder coated paint out door [Kiosk] type feeder pilalr box weather and vermin proof of size 1700 mm x 1500 mm x 450 mm depth, dust & vermin proof, having degree of protection IP-43 with front openable doors and locking arrangement & locks 50 mm dia godrej make with duplicate keystwo earth terminals suiatable cable glands for all Incomming & Outgoing cable removable neutral link connecting strip / solid feeder pillar box 600 mm above ground level by providing 900 mm longangle iron of size 50x50x6mm welded on all the four corners embeded in PCC1:2:4 using 20 mm crushed stone aggregate up to 300 mm comprising of following accessories / component :-- Note : All connection from bus bar will be copper Insulated strip of suitable size & Insulated support. Make : ITE Gurgaon, Asian, Pride, Universal, Shalabh Make of MCCB : L&T / Schneider / ABB / Legrand

Supply, Installation, testing & commisioning in replacement of LT out door type kiosk pedastal panel of size 600 x 600 x 300 mm for three phase 4 wire 415 Volt 50 Hz system fabricated with 3.15 mm thick CRCA sheet with powder coated paint, dust & vermin proof with front openable doors and locking arrangement suiatable cable entries holes at bottom mounted on PCC platform comprising of following:-- [a] Aluminium bus baars of rating 200 Amp capacity 4 Nos [TPN] mounted on supports with shrounded by PVC insulated and arrangement for incomming / outgoing connections complete all as directed.

Supply, Installation, testing & commisioning in replacement of LT out door type kiosk pedastal panel of size 600 x 600 x 300 mm for three phase 4 wire 415 Volt 50 Hz system fabricated with 3.15 mm thick CRCA sheet with powder coated paint, dust & vermin proof with front openable doors and locking arrangement suiatable cable entries holes at bottom mounted on PCC platform comprising of following:-- [a] Aluminium bus baars of rating 400 Amp capacity 4 Nos [TPN] mounted on supports with shrounded by PVC insulated and arrangement for incomming / outgoing connections complete all as directed.

Supply & Fixing in repair earth continuity conductor or main earthing lead made with GI Strip 32mm x 6mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing as required complete all as specified & directed.

Supply & Fixing in repair digital ampmeter 96x96 mm size (0-100 A) with suitable rotary switch three phase with CTs 100/5, class-1 of make L&T or AE or make as approved by GE complete all as specified & directed.

Supply & Fixing in repair digital ampmeter 96x96 mm size (0-150 A) with suitable rotary switch three phase with CTs 150/5, class-1 of make L&T or AE or make as approved by GE complete all as specified & directed.

Supply & Fixing in repair digital voltmeter 96x96 mm size (0-500 V) with suitable rotary switch three phase class-1 of make L&T or AE or make as approved by GE complete all as specified & directed.

Supply & Fixing in repair on load change over switch with out fuse open execution type, 415 Volts, 4 pole 100 Amp capacity conforming to IEC: 60947-3 complete all as specified & directed. Make : Indoasian / Havells / Standard / ABB

Supply & Fixing in repair on load change over switch with out fuse open execution type, 415 Volts, 4 pole 250 Amp capacity conforming to IEC: 60947-3 complete all as specified & directed. Make : Indoasian / Havells / Standard / ABB

Supply & Fixing in repair Indicating lamp RYB complete all as specified & directed.

Supply & Fixing in repair frequency meter digital type 1-50Hz three phase Class 1 complete all as specified & directed. Make : L&T or AE as approved by GE

Supply & Fixing in repair MCCB 4 pole, 415 Volt 160 Amps breaking capacity 36 KA microprocessor release in suitable sheet metal enclosure including connecting to existing cable complete all as directed. Make : "Havells Cat Part No. IHLGHFO160 / L&T / Legrand / ABB / C & S or Schieneder

Supply & Fixing in repair MCCB 4 pole, 415 Volt 250 Amps breaking capacity 36 KA microprocessor release in suitable sheet metal enclosure including connecting to existing cable complete all as directed. Make : "Havells Cat Part No. IHLFNFO250 / L&T / Legrand / ABB / C & S or Schieneder

Supply & Fixing in repair MCCB 4 pole, 415 Volt 315 Amps breaking capacity 36 KA microprocessor release in suitable sheet metal enclosure including connecting to existing cable complete all as directed. Make : "Havells Cat Part No. IHLFNFO315 / L&T / Legrand / ABB / C & S or Schieneder

Material & Labour for welding at joints on hinges of pillar box & repair of locking arrangement system and one coat of painting on steel surface internally & out side of pillar box after preperation of surface complete all as specified & directed.

Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth strip 25x4 mm as earth strip or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 40mm dia GI pipe light grade for protection of GI earth strip including PCC pit 1:2:4 type B-1 using 20mm crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm dai # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-Charge and testing for required value complete. Note :- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt. The length of GI Pipe & earth strip shall be up to 7.5 RM from test point shall be inclusive of rate quoted in BOQ.

M/S UJJAWAL ENTERPRISES

M/S VIJAY SINGH

M/s RAM LAKHAN GUPTA

M/S Garg Sons

Mohit Enterprises

SHAM AND SONS ENGINEERING WORKS

Airways Enterprises

Titco Electricals