SPECIAL REPAIR TO UNIT HQ COMPLEX OF 2255 SQN AT AF STN SRINAGAR

Amount

Building Work

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm and credited to the contractor all as specified and directed. Note: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n exc 4 Sqm each and credited to the contractor all as specified and directed. Note: The damaged portion of the tiles/rendering shall be made good with the same material to match with the adjacent surface.

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site complete all as specified and directed.

S&F 125x60mm size of factory made pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete size/profile of frame as per IS complete all as specified and directed.

M&L for PCC 1:3:6 type C0 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast and as in roof kerb benching & similar work etc complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

M&L for applying one coat of synthetic enamal paint on steel surface of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and as directed.

S&F for Factory made 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, in second class hardwood, complete all as specified and directed.

S&F for Factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated in second class hardwood, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of primer to new wooden surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as specified and directed.

S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet fore top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be filled in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site all as directed.

S& F Aluminium alloy, anodised, sliding door bolt 200mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed staple plate and fixed complete all as specified and directed.

S&F for 150 mm long Aluminium anodised,handle of extruded section fabricated type anodised and fixed complete all as specified and directed.

S&F for Aluminium, anodised, barrel tower bolts 150mm size of extruded section, complete all as specified and directed.

S&F 125 mm long Aluminium anodised,handle of extruded section fabricated type anodised and fixed complete all as specified and directed.

S&F for Aluminium, anodised, barrel tower bolts 125mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F for Butt hinges, medium weight, cold rolled mild steel 100mm size, complete all as specified and directed.

S&F mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete 200mm length, complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 140mm cover plate and tounge, anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed

S&F 0.8 to 1.0 meter long door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, complete all as specified and directed.

S&F for UPVC windows with following specification, glass 5mm clear tough+12mm A,G+5mm clear toughened, Profile-Mozart Premium, colour-white, Drainage, Face, Reinforcement standard, T-joints, Mechanical/V-welded, Bead-Default, Mesh-Pull down, Handle type Cocksper handle, Complete all as specified and directed.

S&F for UPVC ventilator with following specification, glass 5mm clear tough+12mm A,G+5mm clear toughened, Profile-Mozart Premium, colour-white, Drainage, Face, Reinforcement standard, T-joints, Mechanical/V-welded, Bead-Default, Mesh-Pull down, Handle type Cocksper handle, Complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

M&L for Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

M&L for 6 mm thick Non asbestos fibre cement building boards one side aluminium foil coated fixed or laid/ inserted to aluminium frame work with screws including taking down complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair 20 mm dia Stainless steel drapery rod inculding steel funnel and steel brackets standard quality as approved by Engr-in-charge complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thicknes, complete all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished) 18-20mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cm 1:4, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over screed bed or bedding layer 20 mm thick in CM 1:6, and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including backing coat 10mm thick in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub base of floor finish even and rough to receive further floor finishes ( tile/kota stone/ marble ), complete all as completed all as specified and directed.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed.

M& L for Light shade Vitrified Ceramic tiles 08-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat, complete all as specified and directed.

M& L for Light shade Vitrified Ceramic tiles 08-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed.

M&L for 10mm thick vitrified parking tiles heavy duty exterior grade texured finished of size 400X400 mm complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 as in parking tiles complete all as specified and directed.

M&L for rubber molded glossy finish Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / hardstanding, laid over screed bed complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer in CM(1:6) as in Pre-polished tiles complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. Complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, Complete all as specified and directed

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius in half brick thick wall built in cement mortar 1:6, Complete all as specified and directed

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on other than fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement, complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion including 2mm thick layer of wall care putty and priming coat preparatory to distempering on surfaces of wall, , complete all as specified and directed.

M&L for preparing of new surface of plaster and applying three coats of white wash on ceiling.complete all as specified and directed.

M&L for Preparation of newly plastered surfaces, and applying two coat of weather paint (Apex) paint over a coat of exterior primer colour and tint as ordered in any pattern upto 15 metres height including 1mm thick wall care putty on wall sides and soffits of the beams, ceilings, fascias, parapets etc complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying thin layer of wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion (OBD) paint over a coat of primer on walls complete all as specified and directed.

M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as specified and directed.

M&L for complete removal of existing surface treatment from the old plastered, pointed/concrete surfaces vertical or horizontal including brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and applying two coat of weather paint (Apex) paint over a coat of exterior primer, colour and tint as ordered upto 15 metres height including sides and soffits of the beams, ceilings, fascias, parapets etc, complete all as specified and directed

M&L for complete removal of existing treatment of existing walls surface and prapering of existing treated surface of wall throught including painting as per user/ site requirement through ASI specification and ASI skilled labour (Archaeological Survey of India) complete all as specified and directed. Note : Work will be executed by ASI skilled labour.

S&F in repair 15mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to wall and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required,complete all as specified and directed.

Taking down & Refixing old GI pipe 15 mm bore & connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

S&F in repair 20mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required,complete all as specified and directed.

Taking down & Refixing old GI pipe 20 mm bore & connections in new or old position to walls and ceiling or laid in floor complete all as specified and directed.

M&L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed.

M&L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed.

S&F in repair white vitreous China, under counter wash hand basin, oval shape, of size 595 x 420 x 200 mm with all fixing accessories fixed in counter, supply & fix new brackets, 32 mm size brass chromium plated waste coupling, complete, all as specified & directed.

S&F in PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make: Cera/Prayag

S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed

S&F in repair, Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe), pvc sheet cover and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairsr vitreous china pedestal pattern EWC (couple closet bowl) of size 370x640x760 mm including UF seat cover, hinges, S trap -220 mm, accessories set etc and including vitreous china ware flushimg cistern complete all as specified and directed. Make of cistern & EWC: Jaquar model No-FNS-WHT-40201 & FNS-WHT-40751P/Marc/Plumber

S&F in repair CP Health faucet fixed with spring action and lever along with Flexible shower hose with brass nut of length 1.5 m fitted in the existing water connection in the toilets, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern (Twin fush type), low level 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs 15 mm bib tap CP, cast copper alloy with capstain head screwed down screwed for iron pipe or for brass ferrule fancy type, complete all as specified and directe.

S&F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with capstain head screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed.

S&F in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed.

S&F in repairs of Shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleates (minimum weight300gms) complete all as specified and directed.

S&F Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repair hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down for pipe of bore 15mm, including necessary fittings, complete all as specified and directed.

S&F in repairs Soap dish, brass CP any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs, PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall, complete all as specified and directed.

S&F in repairs, PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed to wall complete all as specified and directed.

S&F in repairs 75mm bore dia PVC floor trap(SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S&F in repairs 75mm bore PVC(SWR) door bends any radius complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed.

S&F in repairs 110 mm bore PVC(SWR) door bends any radius provided with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball PTMT valves, high pressure, with polythene float and flynut complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type including all fittings with grating, spreader and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed

Demolition of cement concrete (unrein forced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) including surface finishes of any type ie tiles, kota stone all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints finishing surface even and smooth without extra cement complete all as specified and as directed.

M& L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base Complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation. Complete all as specified and direction.

S&F in repair for 8 mm thick HDF laiminated wooden flooring any colour laid over and including 2mm thick EPE foarm sheet complete all as per manufacture instruction and 150 micron polyothene should be placed below foam to as a water barries complete all as specified and direction incuding cleaning of existing suface of floor complete all as specified and as directed. Make - Green floormax of green ply/ action tesa or equivelent make

S&F for IInd Class Hardwood wooden Moulding as in cornices, picture rails Exc 6 Sqcm but N exc 13 Sqcm and fixed with screws/nails on wall/floor complete all as specified

S&F in repair 09 mm thick Plywood, grade BWR, type BB, fixed with screws to alum/ iron frame work, complete all as specified and directed.

S&F in repair for Wooden Wall panelling of second class softwood 12mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coat of french polishing on all the exposed surfaces wooden panelling as in repairs including taking down existing electrical fittings and re-fixing the same, complete all as specified and as directed

Taking out old wooden boarding as in from kitchen cup boards and M&L kitchen shutters and partition of Factory made Solid PVC embossed shutter 18mm mm tkick (stiles), with 2mm thick Moulded PVC prelam colored sheet on the front of face and fixing in frame at site as per specifications withall around FRM sheet , PVC particles board 18mm thick complete all as specified and directed. incl all iron mongry such as appropriate no of kobs, handles 75mm long, ball catchers, piano type hinges etc Note- Measurements will be taken as flat.

M&L Rolled mild steel in roof trusses (framed), trussed, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A complete all as specified and directed

M&L for structural steel work as in truss,rafter purling, made out of anglle/Hollow pipe/tube section etc including jointing cleats, plates flat iron, gusset plates, rails, braces etc Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe- 290 (Gde E- 165) (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for applying one coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth incl preparation of old steel surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including preparation of old painted wooden surfaces of all as specified and directed

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, Complete all as specified and directed.

M&L for RCC, Type B1 1:2:4 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L reinforced cement concrete Type B1 1:2:4 ( 20mm graded aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over , cut to length , bent to shape required including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional. layed with 150mm thick bedding 1:4:8 type D-2 and depth 0.70m to 1.65 m average complete all as specified and as directed.

S&F On site LLDPE septic tank for 25 user With UPFLOW FILTER INLCUDING MEDIA, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc complete all as specified and as directed.

M&L for Soakage well in soft / loose soil, PCC 1:3:6 in foundation, 150 mm thick, wells of Honey combed brick work with Cement Mortar 1:4 with using sub class ‘B’ old size brick, PCC bend using 1:2:4 concrete at every 1.00m Ht, 115mm thickness of brick work should be increased at every 0.75m depth and filling brick bats in the wall upto 2.00 height and provide RCC slab 100mm thick of M-25 grade concrete including intercepting / Screen chamber, complete size 1.80m dia and 6.00m depth (25 users) complete all as specified in TD-CE/AF/STD-15/2000 Sheet No 1/2 and 2/2 dated 05 Jan 2000. (TD drawing attached) complete all as specified and directed

Internal Electric Supply

Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing complete all as specified and directed.

M & L for Concealed Point wiring for Light/ceiling/exhaust fan point controlled by one switch on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-Charge. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately.

Description all as per item No 124.00 above but for one belll/Buzzer point controlled by one bell push 5 Amp on the same board with other switches or independent.

Description all as per ser item No 124.00 but for 05 amp socket outlets point controlled by one switch on Same board complete all as specified and directed.

Description all as per ser item No 124.00 but for 05 amp socket outlets point controlled by one switch on Independent board complete all as specified and directed.

Description all as per ser item No 124.00 but for 15 amp socket outlets point controlled by one switch on Independent socket outlet using 2.5sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid surface conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 2.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-Charge.

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-charge

Description all as per Item No 129.00 above for exc 10 cm but not exc 20 cm girth complete all as specified and directed by Engr-in-charge

M & L for module cover plate with frame as per site requirement for following module

1 module

3 module

4 module

6 module

8 module

M & L for Modular metal Flush box as per site requirement.

1/2 module

3 module

4 module

5 module

6 module

S&F in repair RJ 45 UTP information outlets- toolers boxes complete with PVC Each modular box 1/2 module, tresa plate and cover plate all as specified and directed.

S & F in repair of DLP plastic trunking of size 105mm x 50mm for laying of AFNET cables.

DLP trunking of size 105mm x 50mm

Joints for cover and base joints

End Caps

Flat junction

S & F in repair in PVC Casing capping of suitable size having wall thickness not less than 1.2mm thick and minimum 20x12 mm (wxh) but shall be increased as per actual site requirement including accessories like bends,tees, junction boxes, reducres , bell mouth turbe ends and fixing accessiries such couplers, lock nuts, saddles hook etc all as specified.

S & F in repair of junction boxes 1 to 4 way.

M & L for modular switch 1 way 6 Amp,230 volts ,1 Module complete all as specified and as directed by Engr-in-charge.

M & L for modular Bell Push Switch1 way 6 Amp,230 volts, 1 Module complete all as specified and as directed by Engr-in-charge.

M & L for Modular Switch 1 way 16/20 Amp,230 volts, 1 Module complete all as specified and as directed by Engr-in-charge.

M &L for Modular Socket 6A, 230 volts, 2/3 Pin universal 2 module complete all as specified and as directed by Engr-in-charge.

M &L for Modular Socket 16A, 230 volts, 2/3 Pin combined 2 module complete all as specified and as directed by Engr-in-charge.

M &L for Modular fan step regulator 100 watt 2 module complete all as specified and as directed by Engr-in-charge.

S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed by Engr-in-Charge.

Supply and fix Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting complete.

S&F energy efficient LED integrated batten type luminaires suitable for wall or ceiling mounting with built in LED Chip & integral LED driver 20 watt,Aluminium channel housing & Polycarbonate diffuser of length 1200 mm (approx.),Color temperature 6500 K or as directed,Luminaire efficacy not less 100 lm/W with all accessories, fixing arrangement internally pre-wired, making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting complete all as specified and directed by Engr–in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed.

Supply and fixing LED Bulk Head type with high out put , 10 watt, 220 V AC,Color temperature 6500 K or as directed,Lumens 1000 lm with all accessories ,IP 65 protection dust and water resistant ,surge protection up to 2.5kV, PC opal high efficiency diffuser ,LM 80 tested made die cast aluminium housing with complete assembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistarnd PVC insulated cable of suitable size complete all as specified and directed.

Supply & Fixing LED luminaire 600mm x 600mm,35/36 Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexiable copper conductor cases of suitable size complete all as specified and directed by Engr-in Charge.

S&F heavy duty aluminium Warm White 10 watt outdoor spot light with narrow and long distance beam with CREE LED and high quality driver complete all as specified and directed.

S&F LED LYCUS LED SPIKE LIGHT 25 Watt, Environmental friendly, new generation, energy saving, decorative IP66 LED spike light using COB LED as light source complete all as specified and directed. Make : Havells Model Cat Part No LYCUSSPS25WLED730PSYMBOTG

S&F Flexion AC LED Rope warm white 144D Strip 6500 K IP65 50 Mtr M , IP65 LED strips, including necessary connectors, Rope clips(for fixing of LED strip rope) complete all as specified and directed. Make : Havells Part No LHEHBQP7TN6F325

S&F LED scenary light 18 Watt 2 feet, Warm White including fixing on the top of sceneries with all electrical and driver conections complete all as specified and directed. Make Luker Part No LMCL 18

S&F flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP66 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 100 watt or higher size LED , Glass cover, fixed on pole duly fixed on angle iron bracket complete all as specified and directed. Make Havells Part No ETAQUANTOPLUSFLP60WLED757SYMLENS

S & F sheet metal enclosure TPN for DB's when MCB's to be used 8 way with 200 amps bus bar and double door complete all as specified and directed.

S&F MCB TPN 240 Volt 10 KA 63 Amp conforming to IS complete all as specified & directed.

M &L for Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make/type/size (horizontal/vertical) lowering and place at site , examine the parts including preparing inventory for each geyser separately in presence of Engineer-in-Charge and cleaning and de-scaling of deposited material from inner tank, outer tank and heating elements by HCL or aqua clear pedilite solution,checking electrical connection for thermostat and indicator lamp, repair to minor leaking by soldering/brazing of the inner copper tank if noticed and and painting of geyser of any capacity after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high ) &reassembling and re-fixing of geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge .

M & L taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blades frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts complete all as specified and as directed by Engr-in-charge.

M & L for Hanging only ceiling fan (M.D. supply) incl replacement of rubber real insulator,split pin,nut,bolt, washer and connecting up including provision of cable 3 core flexible from ceiling rose or connector to fan complete all as specified and as directed.

M & L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and marking MES No. with black paint complete all as specified and as directed by Engr-in-charge.

M & L taking down carefully Exhaust fan 300mm sweep, or overhauling including dismantling of blades frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts complete all as specified and as directed by Engr-in-charge. complete all as specified and directed .

M & L for Fixing only exhaust fan (M.D.supply) and connecting up including provision of cable 3 core flexible from ceiling rose or connector to fan complete all as specified and as directed.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size 200 amps bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification

M & L for distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, VTPN 4 way with 200 Amps rated copper busbar, 415 Volts with in built MCCB 125 Amps, 16KA, 2 neutral bar and 2 earth bar IP 54 protection,cable ties for cable management(Fully insulated busbar and shrouded neutral bars),reversible door for IP 43 & IP 54 ,flush mounted to wall complete all as specified and directed. Note : Rates are inclusive for flush(Concealed ) mounting of DB and MCCB 125Amp TPN is included under respected items.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissionincomplete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 40- 63 AMP , in the MCB DB Complete with connection testing and commissionincomplete all as specified and directed.

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and directed. Note: (i) The unit rate includes GI pipe up to 7.5m for protection of earth lead. For any additional length the same shall be adjusted through deviation order. (ii) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department.( note:- 2 earthing for memorial room)

M&L for submain wiring with 3 runs(N+P+E) of 4.00 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 4.00 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 167.00 here in above, but 3 run of Cable 6 Sq mm. Note:-3 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

All as per item No 167.00 here in above, but 6 run of 6 Sq mm (3run -Phase, 1 for Neutral & 2 Runs for Earth with recommended colours) and drawn through not less tha 32 mm dia PVC conduit . Note:-6 runs of 6 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Air Conditioning & Refrigeration

Taking down of split type AC 1.5/2 Ton complete mounting, fitting indoor & outdoor units, duly restoring the gas and refixing in new location complete all as specified and directed by EIC. Note: Extra refrigerant pipe line, electrical accessories, refrigerant where required will be measured and paid for separately

Servicing/maintenance of split type air conditioner of 1 to 2 ton cap any make any size which includes the following :- (i) Unscrewing the front cover of internal unit at its location and cleaning of filter/ servicing/ cleaning the entire unit with electric blower and cleaning with colin or equivalent agent including testing and refixing complete all as directed and specified by Engineer-in Charge. Note :- (i) Spare parts any reqd shall be measured and paid separetely as supply only . (ii) Labour element for fixing of any defective spare part shall be part of the item excluding major parts like compressor, gas charging, leak testing etc (iii) All the serviced AC units shall be handed over on daily basis through proper documentation . (iv) Thorough care / protection of PCB plate shall be taken to avoid any kind of damage while servicing/ cleaning or otherwise same will be repaired/replaced by contractor at his own cost. (v) Each service shall be measured and paid separetly as each job.

Disconnecting electric connection from defective blower motor and taking out from window type/ split AC outdoor unit capacity 1.5/2 TR of existing make, dismantling the burnt winding & rewinding of 1/6 to 1/8 HP double shaft blower motor with the existing size of super enemelled copper winding wire including insulation, varnishing, greasing, testing complete and refixing the same and testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair only insulation on and around suction and discharge copper tubing of size 3/8" and 5/8" with 6 mm thick flexible nitrile insulation heat resistant, for split type AC complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair only 1/2” dia copper tubing complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair only 1/4” dia copper tubing complete all as specified and directed by Engineer-in-Charge

Taking out of defective wiring of indoor/ outdoor unit, PCB, visual eye damp plates, unserviceable cordless electronic remote control and fixing the new wiring, cordless electronic remote control, PCB, visual eye damp plate in place of damaged items of split AC of capacity 1.5 TR/ 2TR including matching the existing system complete all as specified and directed by Engineer-in-Charge, Make: Voltas/Blue Star/LG/Carrier

Supplying and charging (Top up) refrigerant R- 410A/407C for Split AC / Window AC in required quantity for desired cooling complete all as specified and directed by EIC.

External Electrification

Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor 1100 volts heavy duty, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc, to suitable the cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc complete as speccified and directed by EIC of size of cable 25 Sqmm 4 core.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil etc all as specified and directed

Returing, filling in incl spreading, levelling, watering and well ramming in layers n exc 25cm thick after laying of the cables,jointing & testing complete all as specified and directed.

Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n. exc 1.50 m above the starting point complete as specified and directed.

M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc complete as specified and directed.

M&L for laying of bricks well burnt sub class B (old pattern) laid flat for cable protection width equal to the length of bricks complete all as specified and directed

Supply and fixing galvanised iron tube light grade' for protection of copper strip at wall and duct/road/trench for 40 mm dia of pipe complete all as specified and directed by EIC

Supply & Fixing Bracket made out of GI light grade pipe of size 40 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 50mm x 50mm and 04 sets of nuts,bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified and as directed by Engr-in-charge.

S&F LED Street Light fitting 35 watt, for opearting voltage between 110V to 320V system efficiency not less than 120 lumen / watt,PF-0.95 minimum, IP66 protection, 5700CCT(K), CRI between 80-85,confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012,for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in cast aluminium housing with SS screws with IP 65/66 protection, complete all as specified and as directed by Engr-in-charge.

M/S WANI AND SONS (BID ID -3282036)

M/S Abdul Ahad Rather (BID ID -3276471)

M/S LATIF AHMED MIR (BID ID -3275925)

M/S BASHIR AND SONS (BID ID -3278064)