Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹36.7 L+₹3.3 L (9.73%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹44.0 L+₹10.5 L (31.3%)Rejected-Finance 402 C WING BUILDING NO 86 NAVRANG CO OP HSG SOCIETY LTD TILAKNAGAR CHEMBUR MUMBAI 89 | MUMBAI | MUMBAI | MAHARASHTRA | 400089 | L3 | Rejected-Finance NOT LOWEST |
Tender Value
₹46.9 L
EMD Value
₹93,860
Closing Date
22 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
REPAIRS TO ROOF, JOINERY AND OTHER CONNECTED WORKS IN CERTAIN BLDGS OF ZONE A IN DRDO TOWNSHIP KANCHANBAGH, HYDERABAD
2022_MES_547908_1
GE I KBAGH TOKEN 36 OF 2022 2023
Open Tender
Civil Works
Item Rate
270 days
Hyderabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹93,860
Yes
18 Oct 2022
26 Aug 2022
24 Sept 2022
26 Aug 2022
22 Sept 2022
9 Sept 2022
27 Aug 2022 - 5 Sept 2022
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each
Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed
S&F 125x60mm Pressed steel frames for doors with one or more rebates including lugs etc., complete, as specified and directed.
S&F 105x60mm Pressed steel frames for doors with one or more rebates including lugs etc., complete all as specified and as directed by Eng-in-charge.
M&L for filling back hollow of steel frames with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all as specified.
S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification & drawing
S&F Fatory made solid panel PVC door shutter, 30mm thick(stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing
S&F 35mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides fixed to chowkhats complete all as specified and as directed.
S&F 35 mm thick plain, framed, panelled shutters(any number of panels) factory made, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers all as specified and as directed.
S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of 2nd class HW wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed
S&F stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and as directed.
S&F 100 mm long medium weight, stainless steel Butt hinges.
S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150 mm
S&F aluminum anodized barrel tower bolt of extruded section size of bolt 200 mm
S&F aluminum anodized handle fabricated type type 200 mm size complete all as specified and directed.
S&F mild steel 250 mm long sliding door bolt type, stove enamelled black, with brigth bolt not less 16 mm dia with and including a minimum of 6 bolts and nuts etc complete.
Supply and fixing floor door stopper 100 mm size of aluminium alloy body and anodized.
Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old window complete all as specified. all as directed .
Supply & fixing of UPVC ventilators with top hung glazed and wire mesh shutters made out of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutter fixed with 3 mm thick frosted glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old ventilator complete all as specified all as directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incl dismantling old mild steel work of any description complete all as specified.
M&L for preparation of new wood surface of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer complete all as specified and directed
Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick frosted glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed.
M&L for providing cement concrete 1:2:4 , type B1, using 20mm graded stone aggregate as in hodfasts, copings and the like complete all as specified.
S&F in repair 1mm thick mild steel, plain black sheet in in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required
Refixing shutters of any description exc 1.00 Sqm mtr and n:exc 2 Sqm in each in same opening complete all as specified.
Taking down cement plaster of any description built in cement mortor and removing debris outside MOD land complete all as specified
Demolition of brick work or stone/boulder masonary built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and rubbish off the premises.
M&L brick work using sub class 'B' old size fly ash bricks straight or curved on plan exc 6 mean radius built in CM 1:6 complete all as spfd and directed
M&L Brick Work using sub class ''B” fly ash Bricks, straight or curved on plan exceeding 6M mean radius in half brick thick wall bulit in CM (1:4) complete all as directed by Engr-in-charge.
M&L for rendering 15mm thick in cement mortor 1:6 on fair faces of brick work finished even and smooth w/o using extra cement complete all as specified.
M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)
M&L preparation of new plastered surfaces and applying two coats of OBD as per manufacturers instructions over a coat of true care wall primer over two coats of birla putty 1.5mm each to level the surface and finshied smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and directed. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT
Dismantling floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises. all as directed.
M&L for glazed coloured ceramic tiles in vertical surfaces 300x200x6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick work etc complete.
M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete.
Demolition reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc.complete and removing debris outside MOD land complete all as specified.
S&F factory made fiber glass reinforced plastics(FRP) chajja 4mm thick of roofclad brand or equavalent in required colour size and design made by Resin Transfer Moulding (RTM) machine techonolgy, resulting in void free compact laminate in single pieces having smooth gradual slope curvature for easy dranage of water and duly reinforced by 02 Nos verticaly an 01 nos horogontaly 50x2mm thick MS flat in built hole for grouting on the existing wal along with 50mm flanges duly inserted and seal in wall complete in one single piece casted monolithicaly including all necessary fittings. The FRP chajja should be manufactured using unsaturated polyeyster resin as per IS:6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gelcoat U/V coating on top for complete resistance from the extreme of tempertature weather & sunlight all as specified and as directed by Eng-in-Charge.
Dismantling timber scantling 40 sq cm and over in section, in any position, framed work
Dismantling timber scantlings in fillets,rails,posts,rafters,purlins etc under 40 sq cm in section, in any position unframed work.
S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling existing sheet of any description all as directed.
S&F in repairs Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley gutters, fixed to existing sheeting supports including dismantling existing sheet of any description and necessary scaffolding etc all as specified and as directed.
M&L for preparation of new steel surface of any description over 10 cm in width or girth not other wise described and applying two coat of synthetic enemal paint over one coat of red oxide primer all as specified and directed
Taking down existing roof treatment of any description, any position with bituminous felt and removing rubbish to a distance outside MOD land complete all as specified.
M&L for Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in padding concrete, coving of vertical junctions on roof top incl dismantling old loose /cracked cement concrete complete all as directed by Engr-in-charge.
M&L for brushing neat cement slurry with 3 Kg of cement per Sqm over the RCC slab and sides complete all as directed by Engineer -in- Charge.
M&L for rendering 10mm in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @ 3% by weight of cement shall be carried out complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured and paid under respective item of this schedule.
Supply only integral water proofing compound
M&L water proofing treatment with polymeric standard membrane of weight not less than 350kg per sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) laid over primed surface by forced application complete. Shall be fused uniformly by LPG torch flame on horizontal/vertical/slope surface on roof complete and preparation of surfaces of any description, over 10cm in width or girth otherwise described and appplying two coat of aluminium paint @100ml per sqm over APP membrabe sheet complete all as specified and directed by Engr-in-Charge. Water proof treatment consist of as under: - (i) Applying one coat of bitumous primer conforming to IS 3384 @ 0.3 ltrs per sqm (ii) Laying APP based memberane as specified thickness and weight. (iii) Appplying one coat of bitumen grade 85/25 @1.20Kg per sqm. (iv) Two coats of aluminium paint
M&L for cutting grooves in brick wall 70mm wide and 65mm deep and sweeping horizontal face of groove with cement mortar (1:3) and making good in CM 1:3 after inserting membrane into the groove complete all as specified and as directed by Engr-in-Charge.
M&L for specialised poly sulphide sealant treatment to the tarrece/wall cracks as under :- (a) Cleaning of surface (b) Making V grooves (6mm width and depth) c) Application of primer one coat (zoriseal primer/arbokol AG2 primer/assar power primer). (d) Filling of groove with two coats of polysulphide sealant.
M&L for providing and fixing false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm of model prima fine fissured RH 99 suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx 14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm) x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, all complete at all height as per specification, drawing and incl dismantling old false ceiling all as per direction of Engr in Charge.
S&F 18 mm thick Granite (of any type) slab machine cut, as in window cills laid over 15 mm thick screed bedding in cement mortar 1:6 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and dismantling old stone slab complete all as specified and directed.
S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete
M/s K Venkateswara Rao
Sai construction & services
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .