SETTING UP OF MECHANIZED DEPARTMENTAL LAUNDRY OF CAPACITY 03 TON PER SHIFT AT ARA DEPOT

Item Breakup - 1-Mechanical Estimate

Supply, Installation and commissioning of Numbers Washer Extractor of 120 Kg/Hr capacity

Supply, Installation and commissioning of Numbers Tumbler Dryer- 60 Kg

Supply, Installation and commissioning of Numbers Dry cleaning Machine - 30 Kg

Supply, Installation and commissioning of Numbers Wet Linen Trolley of 50 Kg capacity

Supply, Installation and commissioning of Numbers Double Roller Flat Work Ironer of dimension 3300 X 800 mm

Supply, Installation and commissioning of Numbers Mobile Table

Supply, Installation and commissioning of Numbers Steam Boiler of capacity 850 Kg per hour with water softener and all accessories (Primary use-01 no & Standby-01 no.)

Supply, Installation and commissioning of Numbers Air Compressor of 120 CFM at 10 Kg/cm2

Supply, Installation and commissioning of Numbers DG Set 125 kVA

Supply, Installation and commissioning of Numbers Effluent Treatment Plant(ETP)-Capacity 30 KL/Day

Supply, Installation and commissioning of Numbers Water Softener Plant of 28 KL/Regenration

Supply, Installation and commissioning of Numbers RO Plant of capacity above 1000 LPH

Supply, Installation and commissioning of Numbers All in one Desktop

Supply, Installation and commissioning of Numbers all in one printer

Non Revolving Vistor Chair Installation and Commissioning)

Supply, Installation and commissioning of Numbers Computer Table

Supply, Installation and commissioning of Numbers Washer Extractor- 60 Kg/hr capacity

Supply, Installation and Commissioning of Numbers Revolving Chair for Supervisor

Supply, Installation and Commissioning of Numbers UPS

Supply, Installation and commissioning of Numbers Dry Linen Trolley of 50 Kg capacity Total 20282537.38 Supply and fitment of steam pipeline work along with accessories for 03 Ton per shift capacity of Item- 12 Mechanized Laundry S No. Item No Description of Item Unit Qty Rate Amount

M.S. C class piping conforming to IS: 1239 Metre with TC, size -1.5 inch DANAPUR DIVISION-MECHANICAL/EAST CENTRAL RLY

M.S. C class piping conforming to IS :1239 Metre with TC, size 1 inch

M.S. C class piping conforming to IS :1239 Metre with TC, size 1/2 inch

M.S. flange Table H specifications, size 1 Numbers inch

M.S. flange Table H specifications, size 1.5 Numbers inch

M.S. C class Seamless Bends, Size, 1.5 Numbers inch

M.S. C class Seamless Bends, Size, 1 inch

C.I. IBR approved steam Valves with T.C., Numbers Size 1 inch

C.I. IBR approved steam Valves with T.C., Numbers Size 1.5" inch

Steam Header to be fabricated out of 6 Numbers inch seamless pipe with 01 inlet, 3 outlets and 1 spare connection complete with pressure gauge, Drain Assembly and Steam Traps. The Header will openable for ease of cleaning and maintenance.

MS Angle, Channel etc for supports, Kg chimney support and structure for diesel tank

Diesel Piping from Diesel Tank to Boiler Set with inlet valve, Bypass line and drain arrangement.

MS Nut bolts of various sizes

Thermal Insulation of Steam pipe line Job including Header with LRB Matress/Glass wool, 2" thickness, min. density 50Kg/m3 with Aluminium cladding over Steam pipe line with 26SWG gauge sheet with labour and all hardwares accessories.

Labour charges for complete erection, Set fitting and handling over of entire pipeline Total 1357944.00

Item Breakup - 2-Civil Estimate

Item Breakup - 3-Civil Estimate

Providing and fixing of self supported arch Sqm shaped mechanically seamed trussless galvalume roofing system Total 2436288.00

Item Breakup - 4-Electrical Estimate

Laying of the cable partly through trench Metre at a depth of one meter and filling with suitable cushioning materials or under the road by laying through G.I. pipe at a depth of one meter or at platform/road/wall where excavation of one meter is not possible only cutting of the surface to the size of cable with at least two inch covering by concrete is required and refilling with earth and partly of the rail/lamp post/PF color/wall with supply of clamp made of MS flat 35x6 mm with nut- bolts adequate number with maximum space of one meter/wherever feasible etc including connection as per site condition of different sizes of cables. For laying each cble separate trench is required. In case due to space constraints more than one cable is required to lay in one trench, payment will be released in form of length of trench and not in length of underground cable. (Cable will be supplied by Railway from separate item) DANAPUR DIVISION-MECHANICAL/EAST CENTRAL RLY

Wiring of Light point, call bell , Exaust fan Numbers and 5 A plug point in a concealed with a heavy gauge PVC conduit pipe conforming to IS 9537 (pt.3)/1983 or latest, ISI mark with single core 1.5 Sqmm copper FRLS wire (make - Anchor, Finolex, Havells, KEI, Polycab) complete with controlling modular switches and suitable board of Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree make and 16 SWG tinned copper wire as ECC.

Wiring of fan point with regulator in a Numbers concealed with a heavy gauge PVC conduit pipe conforming to IS 9537 (pt.3)/1983 or latest, ISI mark with single core 1.5 Sqmm copper FRLS wire (make - Anchor, Finolex, Havells, KEI, Polycab) complete with controlling modular switches and suitable board of Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree make and 16 SWG tinned copper wire as ECC.

Supply and erection of 5 A 5 pin modular Numbers switch-socket on light and fan control switch board including stranded PVC insulated copper wire conforming to IS:694, FRLS and its Connection, testing & commissioning. All materials required for the job shall be supplied by contractor. Material shall be of ISI approved make. Make: Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree.

15 A 6 pin modular socket point on Numbers separate circuit and modular board: Supply of modular switch socket & fuse point and fixing, testing and commissioning on separate circuit and suitable board and wiring in concealed PVC conduit by using 4 sqmm multistrand copper wire for phase and neutral & 1 x 1.5 sqmm PVC insulated multi-stranded copperwire for earth from MDB/SDB/Board to this separate board. All material required for the job shall be supplied by contractor, Proper colour coding as per IE rules should be followed for wiring. Make: Legrand, Siemens, L&T, Anchor, ABB, Havells, Crabtree.

Wiring of sub-main concealed in PVC Metre heavy gauge conduit pipe of size (O.D.) 20mm make-Malhotra or similar ISI make complete with PVC insulated 2x4.00 sqmm FR/HRFR/FRLS single core multistrand flexible copper conductor/wire unsheathed 1100 volt confirming to IS: 694(latest version) make-Anchor, Havells,Finolex,KEI or polycab with ECC 16 SWG/01 sqmm multi strand single core flexible copper earth wire. In case of celling/beam/column where cutting is not allowed/ possible wiring to be done in open conduit/casing capping by use of drill & roll plug. DANAPUR DIVISION-MECHANICAL/EAST CENTRAL RLY

Supply, fixing, connection,testing and Numbers commissioing of LED fitting indoor type, Lumen efficiency: >=100 Lumen/watt, output system wattage 42W(+10%, -5%) with IP 65 or better protection water proof surface/suspended mounting suitable for operation on 140V-270V AC supply, LED used in fittings should be of Make: NICHIA/ OSRAM/SEOUL/CREE/ PHILIPS LUMILEDS/LEDNIUM with warranty period of 5 Yrs from date of commissioning or 6 Yrs from date of supply whichever is earlier complete with fixing arrangement.

Supply and fixing of 8-way double door Numbers MCB DB with one no DP MCB 40 Amp and 32 Amp 08 Nos MCB SP with sheet metal enclosed type steel cover with all accessories Make- Legrand, ABB, Siemens.

Supply and fixing of 4-way TPN double Numbers door MCB DB with 4 pole isolator 80 Amp one no. and 32 Amp 12 Nos MCB SP with sheet metal enclosed type steel cover with all accessories Make- Legrand, ABB, Siemens.

Supply, fixing, connnection, testing and Numbers commissioning of LED street light, pressure die cast aluminium housing with IP 65 or better protection having system wattage 90W complete with all suitable fixing hardware materials. Make: Philips, Bajaj, Havells, Syska.

Supply, fixing, A connectionand testing of Numbers 500 kVA Compact Sub-station (CSS)with following specifications:RMU: RMU type 8DJH ST:RRL, Non extensible, indoor, Manual operated, 3way,(RRL) consisting of 2 Nos Outgoing LBS (R) & 1 nos. Outgoing VCB feeder (L) with protection CT, Self Powered relays (Non-Communicable) Rated Voltage: 11kV Rates power frequency withstand Voltage:28 kV Rated lightning impulse tested voltage: 75 kV Rated current for ring main feeder:630 A Rated Short Circuit Current: 20kA/3sec VCB: VCB should have self powered relay for over current and earth fault protection without connectivity to SCADA. 3 phase definite time overcurrent and short circuit protection with variable tripping times. CT for VCB should have CTR: 40/1A,class: 10P10 2.5 VA. Each load break switches should include manual SF6 three position switches.Transformer: Rating: 500kVA, 11kV/ 433V DYnll Type:Copper wound, CRT Dry type transformer Off load tap switch of range + - 5% in steps of 2.5% Insulation Class: F .Make - ABB, Schneider, Siemens, L&T, Powerstar. DANAPUR DIVISION-MECHANICAL/EAST CENTRAL RLY

Fabrication supply testing connection and Numbers installation of L.T. TPN distribution panel board cubical type wall mounting dust and vermin proof made of 16 SWG MS sheet angle iron from with all inter connection including 2 coats of best quality red oxide paint and two coats of synthetic enamelled paint with front operated type suitable system of 3 phase - 4 wire 415 V 50 C/S AC supply complete with 200 Amp. TPN copper bus bar entire length & panel inter connection nuts and bolts providing all necessary materials and accessories with following MCB/MCCB panel mounting there is required suitable for indoor/outdoor mounting. In coming. (A) MCCB DTH 200 Amp. range - 140-200A Make LEGRAND/ABB/SIEMENS/L&T - 01 no. (B) Voltmeter with selector switch 0-500V- 1 no. (C) Ammeter with selector switch 200/5A CT operated - 1 no. (D) Indicator lamp RYB - 3 nos. Outgoing. (A) MCB 4 pole 63 A make LEGRAND/ ABB/ SIEMENS/L&T -06 nos

Supply and erection of earthing station Numbers with GI pipe "B" class TATA/JINDAL/Bansal of size 3 mts. long 50 mm minimum dia and provided with alternate layer of charcoal and salt in the earth pipe around the GI pipe and suitable clampinng arrangement including supply and conection with 6 SWG GI wire from earth pipe to panel board as per site requirement. Bore dia of size 300mmx3000mm, digging will be done by auger. Minimum qty. of each enhancement material to be supply is 50 Kg per pit.

Supply, Laying and Fixing G.I Pipe of 75 Metre mm dia for laying the cable across the road/drain/post 'B' class make TATA/JINDAL/BANSAL

Supply, Fixing , Connection, Testing and Numbers Commissioning of Heat Shrinkable cable end terminal Joint kit 11 KV 50/70/95/120 mm2x3 core XLPE outdoor type complete with jointing materials model no. XSOS-12 make Densons/Paychem

Supply, Fixing, Testing and Commissioning Set of GOS 11 KV 3 Pole 400 Amp with locking arrangement and complete with all accessories

Supply, Fixing, Connection , Testing and Set Commissioning of Drop Out Fuse Complete with all accessories

Fabrication supply and fixing of standard Square signage board of required sizes reading in Foot hindi & english complete with fixing arrangement made of MS Iron clamp nut bolts etc...

Supply, Fabrication and fixing of cable Numbers terminal board fully enclosed in MS sheet of 16 SWG thickness all enclosed with painted dust and verim proof water entry protected laying provision of three/two entry with rubber bushing or entry for and incoming cable of all size of 3.5 core and 2/4 nos of 4/10 mmsq single core aluminium wire with suitable size bus bar 63 amp-02 fuse grip etc.. (Size of box 10"x14"x14") DANAPUR DIVISION-MECHANICAL/EAST CENTRAL RLY

Coping and Foundation of steel tubelar Numbers post as 18 inch x 18 inch x 36 inch height with cement, concrete and sand mixture in ration 1:3:6

Erection of steel tubular pole as above Numbers with 1:3:6 cement, concrete , sand massionary foundation including 1/6 th steel tubular pole buried below the ground level

Fabrication and Supply of Heavy Guage Numbers Steel Tubuar Pole of 9.5 meter or required length as per site requirement as per 410 SP 35, at bottom of size 139.7 mm dia x 5.40 mm thick at middle 114.3 mm dia x 4.5 mm thick and at top 88.9 mm dia x 3.25 mm thick. Anchor base plate 400 mm x 400 mm x 600 mm with double arm bracket 1.5 long x 60.3 mm dia suitable for hanging the out door type HPSV/HPMV/Metal Halide/CFL fittings/LEd fittings as required.

Supply, Fixing , Connection, Testing and Numbers Commissioning of LEd fitting door type system wattage 21 W , IP 65 or better, Color temp-4000/6500 k , CRI>80, Lumen effeciency>=100 Lumen/Watt, Voltage range 140 V-270 V, PF>0.9, Wall Mounting with extruded aluminium housing with Polycarbonate , LEd used in fittings should be of make: NICHIA/OSRAM.SEOUL/CREE/PHILIPS LUMILEDS/LEDNIUM with warranty period of 05 years from date of commissioning or 6 years from date of supply whichever is earlier coomplete with fixing arrangement. Make: Philips, Bajaj, HAvells, Syska , Crompton Total 3597998.00