SUPPLY OF LPG AND FIRE FIGHTING HOSES

Supply of 1.5 meter LPG Hose ID 1 by 2 inch Both end Female Connector 1 by 2 inch BSP Make Parker Markwell In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 1.0 meter LPG Hose ID 1 by 4 inch Both end Female Connector 1 by 4 inch BSP Make Parker Markwell. In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 2.0 meter LPG Hose ID 1 by2 inch Both end Female Connector 1 by2 inch BSP Make Parker Markwell In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 2.0 meter LPG Hose ID 1 inch Both end Female Connector 1 inchBSP Make Parker Markwell In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 4.0 meter LPG Hose ID 1 by 2 inch Both end Female Connector 1 by 2 inch BSP Make Parker Markwell. In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 0.70 meter LPG Hose ID 1 by 2 inch Both end Female Connector 1 by 2 inch BSP Make Parker Markwell. In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 1.0 meter LPG Hose ID 1 by 2 inch Both end Female Connector 1 by 2 inch BSP Make Parker Markwell In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 1.0 meter LPG Hose ID 1 inchBoth end Female Connector 1 inch BSP Make Parker Markwell In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 1.25 meter LPG Hose ID 1 by 2 inch Both end Female Connector 1 by 2 inch BSP Make- Parker Markwell. In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.

Supply of 3.0 meter LPG Hose ID 1 by 2 inch Both end Female Connector 1 by 2 inch BSP Make Parker Markwell. In line with OISD STD 135, operate in the temperature range of -25 degree Celsius to 65 degrees Celsius and working pressure of 25 kg per sqcms. Hydrotesting of the hoses to be done at 25 kg per sqcms. Hose shall be made of inner lining of synthetic rubber resistant to LPG. It shall be internally braided with reinforcement consisting of at least one layer of steel wire. It shall also consist of an outer layer of synthetic rubber resistant to abrasion, atmospheric exposure and to LPG. Both lining and cover shall be smooth, uniformly vulcanized and reasonably concentric throughout its length. It shall be free from porosity and other visual defects. Internally braided hoses only with appropriate end connections made of steel. Test certificate covering hydrotest, electrical continuity test and elongation details. Specifications of rubber hose and hose assembly for LPG use are to be in line with IS 9573 or BS 4089 and test certificate from the manufacturer is Required. Electrical continuity of the hose should be Available.