Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L6₹22.3 LAccepted-AOC AT GANDHI MELA PATH TUNDI ROAD GOVINDPUR DHANBAD | DHANBAD | JHARKHAND | 818142 | ₹22.3 L | L6 | Accepted-AOC Technically Responsive |
| 2 | Rejected-Technical | - | - | Rejected-Technical NON RESPONSIVE |
| 3 | Rejected-Technical VILL GIDHOUR PO PS GIDHOUR DISTT CHATRA | NA | NA | 825103 | - | - | Rejected-Technical NON RESPONSIVE |
| 4 | Rejected-Technical GRAM KANODI BLOCK CHATRA | RANCHI | JHARKHAND | 835203 | - | - | Rejected-Technical NON RESPONSIVE |
| 5 | Rejected-Technical GRAM JAMUA PRAKHAND GIDHOUR | CHATRA | JHARKHAND | - | - | Rejected-Technical NON RESPONSIVE |
Tender Value
₹24.8 L
EMD Value
₹49,600
Closing Date
19 Jan 2026, 5:00 pmClosed
EXECUTIVE ENGINEER, R.D.SPL.DIVISION, CHATRA
EXECUTIVE ENGINEER, R.D.SPL.DIVISION, CHATRA
RDD/SD/CHATRA/07/2025-26/Gr_4 Construction and Fencing of Boundary Wall At-UPG. H.S Duari, Gidhour
2026_RDSPL_108632_1
RDD/SD/CHATRA/07/2025-26/Gr_4
Open Tender
Civil Works - Others
90 days
GIDHOUR
PLEASE REFER TENDER DOCUMENT
2 documents required · 2 mandatory
₹5,000
₹49,600
18 Apr 2026
7 Jan 2026
21 Jan 2026
7 Jan 2026
19 Jan 2026
7 Jan 2026
BOUNDRY WALL- E/W in excavation in foundation trenches in all kinds of soil -do- -do- all complete job as per specification and direction of E/I.
Providing sand filling in foundation trenches -do- -do- all complete job as per specification & direction of E/I.
Providing Class 75B brick flat soling joint filled with local sand -do- -do- all complete as per specification and direction of E/I.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) In Foundation
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). In Column
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
Providing 75B brick work in C.M. (1:6) in super structure -do- -do- all complete job as per specification and direction of E/I.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). In Band at Lintel Level
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Providing 12mm thick Cement Plaster in CM (1:6) over walls -do- -do- all complete as per specification and direction of E/I.
Providing TMT steel reinforcement 8mm dia rods to 10mm dia -do- -do- all complete as per specification and direction of E/I.(I) 8MM dia
10mm dia -
Earth work filling in foundation and plinth -do- -do- all complete job as per specification and direction of E/I.Quantity 1/3rd vide item no. 1
Providing two coats of snowcem over new surface -do- -do- all complete job as per specification and direction of E/I.Quantity vide item no. 11
Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6 mm M.S flats or 16mm M.S square bars fitted on 25 x 5 x 6mm M.S angle frame of size 60 x 60 x 6mm -do- -do- all complete job as per specification and direction of E/I.
Providing two coats of painting with ready mixed paint over a coat of primer of red lead paint over steel surface -do- -do- all complete job.
FENCING-Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)
Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Supplying at site angle iron post and strut of required size including bottom to be split and bent at right angle in opposite dirction for 10 cm and drilling holes upto 10mm dia etc. weigth 4.5 kg/m. single Y shape angle section length (2 m)
Providing and fixing concertina coil fencing with punched tape concertino coil 600mm dia 10 metre openable length (total length 90m) , having 50 nos rounds per 6m legth, upto 3m height of wall with existing angle iron shaped placed 3m apart and 9 horizontal R.B.T reinforced barbed wire ,stud tied with G.I staples and G.I clips to retain horizontal , including necessary bolts or G.I barbed wire tied to angle iron, all complete as per direction of E/I with reinforced barbed tape (R.B.T ) / spring core (2.5 m thick) wire of high tensile strength do do all
Providing two coat of synthetic enamle paint (after applying primer coat of red lead paint )of approved shade and make over steel surface do do all
and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Carriage of materials including loading, unloading, stacking -do- -do- all complete job as per specification and direction of E/I. (i)cement
(ii) Sand
(iii) Stone Chips
(iv) Steel
(v) Bricks
Labour cess @ 1%
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_146621.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.92 MB
BOQ_146621.xls
BOQ • 0.33 MB
4.pdf
Tender Documents • 0.48 MB
Download all tender documents and submit your bid