PARK AREA DEVELOPMENT, CONSTRUCTION OF SEATING PLAZA, CIVIC CENTER AND OTHER FINISHING WORKS IN ULSOOR LAKE

PARK AREA DEVELOPMENT, CONSTRUCTION OF SEATING PLAZA, CIVIC CENTER AND OTHER FINISHING WORKS IN ULSOOR LAKE

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...

Cost of Haulage Excluding Loading and Unloading . Case-1 : Surfaced Road. B. Taking output 18 tonne load and lead of 16 km is considered.

Providing casing embankment using homogeneous approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour,all other oper...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fineaggregates as per relevant IS Codes machine mixed with...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (Granular material)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Applying stamping finish on M30 grade concrete on PCC sub grade, applying and finishing with stamp/stencil of approved pattern and color in accordance with Engineers instructions & approved drawings w...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and constructing Size Stone/Coursed/ uncoursed rubble stone masonry in CM 1 : 5 proportion using available stones including cost of all materials, machinery, labour, forming weep holes at sp...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing Raised and cut pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Sand Filling in Wells complete as per Drawing and Technical Specifications.

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification.

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant).

Supplying of Good Quality (New Earth Filling):

Supply of Good Quality Red Soil for Gardening and Growing of Plants, Shrubs, Etc., Including the % weightage given to the BBMP area

Providing and Fixing Selected Quality Granite Kerb Stone of 450mm x 150mm x 300mm Size, including Cutting, Chisteling, Dressing, Grininding & finishing as per approved drawings and fixing with Cement ...

Removing and resetting disturbed Yarguntla /Shahabad /Talikot /PCC / other types of slab lining in CM 1 : 3 proportion by volume with flush pointing in CM 1 : 3 proportion by volume including cost...

Providing and Fixing heavy duty "Black colour granite" cobble stones of size 100mm x 100mm x 100mm, top surface finished to Antique finish, edge cutting of all top four sides by machine cut and all si...

Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials, machinery,labour including pre...

Providing and laying 500x500x40 mm thick Turf paver on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick fine sand, incl...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including c...

Providing and fixing the tensile membrane made from germany make, Make Mehler Valmex FR 900 TYPE II, with 100% white colour , PVDF-lacqer on both side, protected against micribal and fungal attack, UV...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pi...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Sprinkler System: Providing and fixing of sprinkler system with in the site by using 25mm/10kg,40mm/6kg, 50mm/6kg good quality PVC pipes, ISI marked sprinklers, control valves and fittings etc, Includ...

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

Supplying and drawing coreflat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to 13:8130-1984 and virgin ...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Gun metal Non - return valve - vertical (screwed end) 50 mm Dia

Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any.

For 50 mm dia GI Union

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow

Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. - For 50 mm dia GI hexagonal nipple

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI collar:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Supplying of TPST with rewirable porcelain channels in S Menclosure. Made out of 14S WG powder coated paint of approved colour.32A

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tape red inverted wooden plugs screws.20" x 2...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...

Fabricating, supplying and erectionof ...ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening arrangements, ...

Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with injection...

Supply of LED Bollard light fitting of ... W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with injection moul...

Supply and Fixing of Led Spike Tree Uplight: Supplying and fixing flood light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy 90 lm/W. luminiare havi...

Supply of LED flood light luminaire with pressure die-cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with injection moulded polyc...

Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resi...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 16 Sqm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 10 Sqm...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 25 Sqm...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT cable - 2.5 to 25 Sqmm

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron..and M.S.Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - ...

Fabricating supplying and mounting MS boxmade out ....SWG suitable for floor /wall mounting, fully weather proofwith provision for better heat dissipation, provided with hinged front cover, equippe...

Fixing a shunt capacitor of upto 5 kVAR capacity with necessary clamps,bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.

Supplying and fixing regular MCB distribution boards onwall/ Woodboard/ flushmounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3pha...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. - do - 32-40A 4 pole

Supplying.........A rated 3 phase with neutral bus bar using required capacity electrolytic aluminiums trips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator whi...

Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers. 32 A

Supplying and fixing Micro processor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. - 5.14....

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20 A single phase Class-1 Accuracy with Temper Proof Energy Meter.

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable

Up to 4C x 50 Sqmm

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Supplying, fixing, and wiring of earth electrode for grounding conduits, I.C. cutouts, and other equipment on the meter board using 40 mm diameter, 2.90 mm thick GI pipe, 2.5 meters long, to be buried...

1.1 kV, Class HR (Heat Resistant) PVC Insulated, Copper Control Cable as per IS- 554 (Part-1) -do - 4 Core, 16 Sqmm, 30 No GI Wires (1.6 mm)

Gunmetal non-return valve-horizontal (screwed end) 40 mm dia

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 32 Amps

Fabricating supplying and mounting MS box made out ....SWG suitableforfloor /wallmounting, fullyweather proofwith provision for better heat dissipation, provided with hinged front cover, equipped w...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

Supply and Fixing of Puppy Dog Rider / Elephant Rider / Horse Rider: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guideline...

Supply and Fixing of Merry Go Round DX: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all products must be teste...

Supply & Fixing of Four Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, all products must be teste...

Supply & Fixing of A Swing: The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all components designed and manufacture...

Supply and Fixing of Hexa Climber: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all products must be tested and...

Supply and Fixing of Creepy Crawly:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all components designed and ma...

Supply and Fixing of (INFINITY BOWL): " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " As per NIUA Guidelines, all components designed and...

Supply & Fixing of Multi Play System " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, all products must be tested a...

Supply and Fixing of Tai Chi Spinners: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all products must tested and...

Supply and Fixing of Double Health Walker: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all products must tested...

DOUBLE SKI WAKER: Supply and Fixing of Double Air Skier: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all produ...

Supply and Fixing of Waist Twsiter: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all products must tested and ce...

Supply and Fixing of Squat Pushing: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all products must tested and ce...

Supply and Fixing of Pull Down Challenger: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all products must teste...

Supply and Fixing of Bicycle: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all products must tested and certifie...

Supply and Fixing of Seated Chest Press: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached." As per NIUA guidelines, all products must tested a...