Beautification work near KTC Bus Stand in Fatorda Constituency Goa

Amount

CIVIL WORKS

Earthwork in excavation by mechanical/manual means over areas (exceeding 10 Sqm. in plan & 1.5 m in width) at all depths in all type of strata comprising any of the materials such as soil, silt, sand, clay, gravels, moorum of all varieties, shingles, pebbles, all types of conglomerates, all types of laterite rock, soft rock, disintegrated rock, fissured/ shattered/ decomposed rock or weathered rock and all such other materials as described under appendix to these specifications whether in full or in parts as the case may be adopting any approved method or methods as may be convenient or permitted inclusive of chiselling, wedging etc. in all conditions such as dry, moist, saturated, submerged, foul conditions etc. including dressing of sides and ramming of bottoms, including getting out the excavated soil at all lifts, including pumping or bailing out water and disposal of surplus excavated earth as directed by Engineer within a lead of 50mt and all lift etc. complete.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in superstructure from floor I level upto floor V level.

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level

Centering and shuttering including strutting, proping etc. and removal of form for. Foundations, footings, bases for columns and mass concrete

Centering and shuttering including strutting, proping etc. and removal of form for. Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Centering and shuttering including strutting, proping etc. and removal of form for. Columns, Piers, Pillars, abutments, posts and struts (square, rectangle, polygon in plan)

Centering and shuttering including strutting, proping etc. and removal of form for. Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates. Columns, Pillars, Posts & struts (circular or curved in plan)

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates. Cornices & Mouldings

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level. (RMC can be used at no extra cost)

Providing Pre-cast cement concrete jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggreate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine snad) all complete excluding plastering of the jambs, sills and soffits 40mm thick

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. In R.S. joists, channels, angles, tees

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. In flats of all sizes

Providing & fixing M.S. round holding down with nuts & Washer plates complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. 60 mm thick in Grey colour

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. Jet Black

Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and fixing rectified Ceramic heritage look tiles of 300mm x 300 mm size (thickness to be specified by the manufacturer) of 1st quality of approved make and shade for flooring at all levels over cement mortar bedding 20 mm thick 1:4 (1 cement :4 coarse sand) with cement slurry @ 3.3 Kg/Sqm and jointed with grey cement slurry with very fine joints, flooring finished in proper level and slope, including pointing the joints with white cement and matching pigment or approved grout etc. complete. as directed by Engineer.

Providing and fixing of 300x300mm size in Azulejos picture /Text engreved in specified colour installed at all levels on 12 mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and joined with grey cement slurry @ 6.4 kg/Sq.m, filling joints with white cement mixed with matching colored pigment to match shade of the slab including rubbing and polishing, curing etc. complete.

Providing and laying 2nd class mangalore tile roof covering with 25 x 37 mm (1” x 1.5”) jamba wood or similar batten including nails etc., but excluding rafters.

Providing and laying ridge tiles laid dry & pointed with lime mortar 1: 2 (1 lime: 2 surkhi)

Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent

Providing & fixing Sundar Patti of CNC Design cut 400mm x11mm thick partially design & partially plain with 100mm overlap Wood plastic composite board (WPC Board) as per approved design & shape fixing on MS member with help of self-tapping screws including scaffolding etc. complete.

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Neat cement punning

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Extra for plastering done on mouldings, cornices, or arch it raves including neat finish to line and level.In one coat

Painting three or more coats with acryllic exterior paint of approved brand and manufacture including applying one coat of cement primer of approved brand and one coat of surface treatment on all types of plastered surfaces etc. complete.

Providing and applying IPS Plaster in required colour and shade

18mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine1 meter long, 1 cm wide sand)

Pre-cast cement concrete kerb-stones(factorymade) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification-.Size 30 cm L x 50 cm H x 15 cm T

Providing and laying at or near ground level factory made English Gutter Channel stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge Size of Channel 600x300x125mm

Painting two coats after filling the surfaces with synthetic enamel paint in all shades on new plastered concrete surface as per MoRTH specification 803

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 150 mm dia RCC pipes

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white) 40mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white) 50mm outer dia.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). 15 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). 20 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). 25 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). 32 mm outer dia CPVC pipe

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 15 mm nominal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 20 mm nominal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 25 mm nominal outer dia pipes

Disposal of surplus excavated soil / rock boulders / unserviceable dismantled material of all kinds at all lifts & lead including transport, loading, unloading, stacking and making the site clean, etc. complete. (site location for disposal and permission if any from statutory bodies to be taken by Contractor) NOTE : Material to be disposed, measured in stacks will be reduced by 20% for payment.

Supplying and stacking of good earth (suitable for horticulture work) at site including royalty and carriage (earth measured in stacks will be reduced by 20% for payment)

Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).

Supply at site of work well decayed farm.yard manure from any approved source approved by Engineer including screening and stacking as per MORT & H specification 308.2

Supplying of sludge duly stacked at site /store as per MORT & H specification 308.2

Supply and stacking of local sand (Grading zone III or coarser) dung manure (cow dung) on site and mixing with good earth (good earth from item already supplied by Contractor) including mixing earth, sand and cow dung in proportion of 75% earth 20% sand and 5% of cow dung as directed by the Engineer and then spreading over lawn areas as well as filling in excavated pits, planters, flower beds etc in required thickness as per specification or as directed by the engineer incharge and carriage up to 200 m lead.

Supply and Filling with approved black garden soil and spreading of the same in soft landsacpe areas with layers of 20 cms thickness in sequence and depths as specified by consultants

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Sampurna - 19:19:19 / 10:26:26

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Urea

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Neem cake

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. MOP - Murrete of Pottash

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Micronutrient mix (organic manure)

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Bonemeal

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Leaf mould

Maintanance of all the soft landscape areas such as lawns, trees shrubs, palms, cycas ferns specimein plants, bamboos, ground creepers/climbers etc as per horticultural specification including the cost of water, electricity, irrigation system such as flexible pipes & including required pesticids, insecticides, manure, fertilizers etc for a period of 2 1/2 year beyond the succesfull completion of six months of free maintenance period including sweeping of lawns and removing of dead leaves on every day basis for 2 1/2 years as specified by Engineer inclusive of supply and application of horticultural garden impliments such as Lawn mower, Bush cutter, Secatures Equipments such as Budding/grafting knife, hedge shear, garden tools and rakes etc.

VXL AND COMPANY (BID ID -49457)