Const ruct ion of compound wall at AnnaNager and Kovi lvat tam Anganwadi in Thiruvi thancode Town Panchayat 15th Finance Untied Work 2024

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24

Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Supplying and erecting centering to sides and soffits including supports and strutting with 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L bems lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Æ spaced at 75 cm center to centeretc. complete complying with standard specification in all floors. TNDSS NO : 30 & 86.

Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97

Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30

Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8 3/4" x 4 1/4" x 2 3/4" from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification

Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61

Supplying and fixing of MS gate of approved design using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc complete complying with standard specification.

Supply of interlocking paver block M40 grade bounding and laying of 80 mm thick high strength type confirming IS 15658-2006 of interlocking paver block in regained size of minimum compressing strength type confirming IS 15658-2006 of interlocking paver block in regaining size of minimum compressive strength of 40N/mm² in uniform shape of approved non sticking make to be end in flushing bone pattern with approved non sticking surface in the top and the rate including gravelling the based preparation of subbase with and cushion 100 mm thick laying out the pavement and the pieces in fit edge.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coat of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the deportmental officers before use on works)

Painting the new walls two coats over one coat of priming with best cement paint approved colour and quality including prepration of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers.

V RAJENDRAN JEENA DEENA CONSTRUCTION DEALER (BID ID -1230176)