Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC ARAJI NO 932 KATHULA GOSPUR ALLAHABAD ALLAHABAD UTTAR PRADESH 211012 | PRAYAGRAJ | UTTAR PRADESH | 211012 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹21.6 L+₹3,749 (0.17%)Rejected-Finance S NO 7 3 FLAT NO 4 HILL VIEW RESIDENCY LOHEGAON PUNE 411047 | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance High Rate | |
| 3 | L3₹23.0 L+₹1.4 L (6.54%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹23.2 L+₹1.6 L (7.55%)Rejected-Finance | L4 | Rejected-Finance High Rate |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8328 COMPREHENSIVE REPAIRS TO CERTAIN BLDGS OF ASI and OLD NDA COMPLEX UNDER GE (CENTRAL) PUNE
2022_MES_550332_1
8328 COMPREHENSIVE REPAIRS TO CERTAIN BLDGS OF ASI
Open Tender
Civil Works
Item Rate
150 days
GE (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹50,000
Yes
29 Nov 2022
6 Sept 2022
3 Oct 2022
6 Sept 2022
1 Oct 2022
19 Sept 2022
Amount
Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed..
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as directed.
M & L for 50mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded stone aggregate complete all as directed.
M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded stone aggregate complete all as directed.
Material and labour Virified Ceramic tiles light shade (square/ rectangular) polished, of size 600mm x 600mm x 10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.
All as per item No 5 above but in skirting / vertical surfaces over and including 10mm thick baking coat of CM 1:3 in double charge complete all as specified.
M & L for coloured non-skid tiles 400 x 400 x 7 to 8mm thick (square/rectangular) in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.
M & L for coloured non-skid tiles 300 x 300 x 7 to 8mm thick (square/rectangular) in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all specified.
M & L for Glazed Coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in C:M 1:4 as a backing coat with filleting trangular shape on top of tiles etc completed all as directed
M & L for 100mm thick levelling course / sub base in cement concrete type D-2 1:4:8 using 40mm graded stone aggregate complete all as directed.
M & L for rubber moulded machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade fixed with grey cement and no pigment including 25 mm thick sand coushioning complete all specified.
M & L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 complete
M & L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing upto entire satisfaction of Engineer-in-Charge complete all as specified over and including 15mm thick screed bed in CM 1:6 complete
All as per item No 13 above but in skirting over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete
M & L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms, window cills, jambs, wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface including rounding/polishing of edges of exposed granite slab complete all as specified.
M & L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified
Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each all as specified.
Taking down Shutters of any description area not exc 1 Sqm each and refixing in the same opening after carrying out necessary adjusting / minor repairs etc as directed.
All as per item No 18 above but but area exc 1 Sqm and Not exc 2 Sqm each omplete as directed.
Taking down Chowkhats or frames area not exc. 1.5 Sqm each complete as directed
All as per item No 20 above but area exc 1.5 and not.exc 4 Sqm complete as directed.
Taking down chowkats or frames with shutters (w/o taking off shutter from the frame) area not exc 1.50 Sqm each complete all as specified.
Taking down chowkats or frames with shutters (w/o taking off shutter from the frame) area exc 1.50 Sqm but not exc 4 Sqm each complete all as specified.
S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified.
All as per item No 24 above but 105 x 60mm complete all as specified.
M & L for Cement concrete 1:3:6 type C1 (20mm graded stone aggregates) as in filling of pressed steel frame and hold fast block cutting etc complete complete all as specified.
S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as directed
Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters all as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.
S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drawing given on page 176 of SSR 2020 Part II. The width of stiles and rails shall be all as specified in para 8B.2.1 on page 145 of SSR 2020 Part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.
S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.
Dismantling aluminium section of any description and in any position complete all as specified and directed.
S & F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed
S & F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges 3 Nos, anodised aluminium snap beading, screws etc. complete all as specified (Note :- Glass pane shall be measured and paid sepertely under relevant item)
S & F louvers glass ventillators with partially guaged shutter with including using 5 mm thick x 10 cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352 (Note :- Glass pane shall deemed to be included in quoted rate)
S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S & F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section body) complete all as specified and directed.
S & F mortice lock vertical type 100mm brass four lever complete.
S & F 150 mm extruded aluminium alloy powder coated handles , fabricated type all as specified and directed..
S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long for PVC door shutter sall as specified and directed
S & F MS butt hinges 100mm, cold rolled, medium weight complete.
S & F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.
S & F in repair aluminium anodised powder coated curtain rails 25mm dia with rings @ 10cm C/C etc complete all as specified.
S & F Stainless steel fancy type brackets with knob complete all as specified and directed.
Supply and fixing in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete complete all as specified..
Supply and fixing in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm all as specified.
Supply and fixing in repair 3mm thick sheet glass ordinary quality and glazing with oil putty and atleast 06 Nos MS glazing clips per window pane fixed to steel window frames complete all as specified.
Supply & fixing in repair aluminium alloy anodised sliding door bolts with hasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long all as specified.
S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc. complete all as specified.
M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified..
M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with screws complete all as specified..
Taking down / dismantling Wall panelling and similar work at any description and any position complete all as specified.
M & L for 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as shown in drawing given in SSR 2020 Part II all as specified and as directed. .
M & L for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.
S & F aluminium powder coated snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 8mm thick one side prelaminated Gypsum ceiling board of as approved including applying tree coats of white wash complete with following aluminium powder coated sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.
S & F Anodised aluminium snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling. Note:- ceiling band will be measured & paid separately
M & L for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish including preparation of ceiling surface and applying two coats of oil bound distemper over a coat of primer of same make over thin layer of putty, to obtain the true line to achieve smooth surface complete all as specified and as directed Note : - Frame work for ceiling shall be measured and paid separately under relevent item.
S & F 18/19 mm thick, prelaminated PVC moulded solid shelves and drawers boxes fitted under cooking platform / cupboard shutter including frames and other platforms including 2 Nos telescopic channel, 1 No handles (50 mm to 65 mm), magnetic catcher 2 Nos and fixing complete all as speciified and as directed .
S & F 18/19mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, in shelves / partition / shutters with necessary knob, handle, hasp and staple etc complete all as speciified and as directed.
S & F continuous piano hinges width of flap 30 mm mild steel bright finish or electro galvanised complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.
Taking down cement or cement lime plaster of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as directed..
M & L for precast concrete solid block masonry exc 10 cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 complete all as specified and directed .
M & L for rendering 10mm thick in cement mortar 1:6 on brick/ concrete surfaces finished even & smooth with including a thin layer of sagol finish in patches complete all as specified and directed.
M & L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches complete all as specified and directed .
M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over one coat primer over and including thin layer of wall care putty to obtain smooth finish complete all specified and directed.
M & L Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash all as directed and specified.
M & L Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer on wall all as directed and specified.
M & L for GI tubing medium grade 15mm bore dia including all fittings fixed to walls, ceilings or laid in floors , concealed in wall including cutting chases and making good disturbed surfaces in cement mortar 1:3 as required including taking up or down old U/S steel water tubing and connection all as specified and as directed.
All as per item No 71 above but 20mm bore dia.
Cleaning and degermination of water storage tank of 500 Ltr capacity of any desxription and in any position comprising following seven stages of operation complete all as under :- (i) Drain out water by opening wash out pipe or any other suitable method approved by Engr-in-Charge. (ii) Cleaning the algae formatiion inside the tank by using TERBAC G5 laboratory tested chemical (test result to be submitted before the operation of work) (iii) Scrubbing the walls of tank throughly with mechanical scrubber and cleaning with fresh water using high speed jet pump. (iv) Degermification by using TERBAC-G5 halogan compound. (v) Cleaning the floor of tank using industrial vaccum cleaner. (vi) Second bacteria screening by sterilising method using ultra violet ray within the tank to remove all suspended bacteria. (vii) Final cleaning with fresh water and thrid bacteria screening to sterilise the floor of water tank and third bacteria screening to sterilise the floor of water tank using laboratory certified branded strong oxidizing agent TERBAC-G65 and reconning the pipe complete all as directed.
All as per above item No 73 but water storage tank 1000 Ltr capacity.
S & F in repair PVC OH tank cover of same colour of tank made of best quality PVC and fixed in position at any height secured tightly with tank complete
Supply and Fix rotational moulded polythylene water storage tanks, 500 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old broken/damaged PVC water tank complete all as specified and directed.
Supply and Fix rotational moulded polythylene water storage tanks, 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old broken/damaged PVC water tank complete all as specified and directed.
Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.
S & F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding, with and etc. including making good to floor, complete all as specified
S & F in repair vitreous china pedestal pattern, white with including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, seat cover and jet spray etc. including making good to floor, complete all as specified
S & F in repair vitreous china flat back type wash basin, white of size 550 x 400 mm excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete
S & F in repairs vitreous china wash basin white, under counter oval shape and size of 550mm x 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm bore dia of required length and all necessary inlet, out let connections including fancy type CP piller taps 15mm dia with long neck and fly nuts fixed complete all as specified.
S & F in repairs fancy type, chromium plated, bib tap, cast copper alloy with crutch or butter fly handle ,incl wall flange, screwed down,screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed.
S & F in repairs Angle cock 15mm bore fancy type, chromium plated with wall flange cast copper alloy, screwed down , high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs Stop cock 15mm bore (Long shank Concealed type) fancy type, chromium plated cast copper alloy, screwed down , high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete
S & F in repair PVC connection 15 mm of size with PTMT nut of length 450 mm.
Supply and Fix in repairs Pillar tap 15mm bore, cast copper alloy, with capstan heads, fancy type , chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as directed and specified
S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete
Supply and fixed in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed
Supply and fixed in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete
Supply and Fix in repairs vitreous china urinal , with fixing accessories Half stall type, including PVC down waste pipe, fixing plugs etc (but excluding flushing cistern and flush pipe) and fix to walls and connect complete all as directed and specified
S&F in repair vitreous china urinal partition white of size 310x770 mm complete
S & F in repair Stainless steel plate rack of size not less than 900 x 900 mm made out of sheet grade SS-304 thickness not less than 0.63mm approved quality finish complete all as specified and directed.
Dismantling of AC / CGI sheet corrugated, or semi corrugated in roof covering.
S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick ofrequired colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws as specified and directed
Dismantling of structural steel work including doors, gates but excluding framed Truss etc complete all as specified
M & L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality 'A;') including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed.
R K CONSTRUCTION AND ENGINEERING
M/S S H KHAN ENTERPRISES
L.T Associate
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .