GE(S)/M-04/2020-2021

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exc 1.5 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but not exc 4.00 Sqm each, complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 15mm thick rendering in two layers (base layer 10mm thick in CM 1:6 and finishing layer 5mm thick in CM 1:4) with using liquid water proofing compound @ 0.200 ltr per 50 kg bag of cement, on brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of BOQ.

M&L for 10mm thick rendering in CM 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on concrete surfaces of ceiling / top and sides of chajjas/facia of roof projection including necessary formwork, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper over one coat of primer over and including 2mm thick wall care putty, complete all as specified and directed.

M&L for preparation of existing surfaces of walls including washing, rubbing down and stopping of painted surfaces and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of existing surfaces of ceiling including washing, rubbing down and stopping of painted surfaces and applying two coats of white wash, complete all as specified and directed.

Complete removal of existing treatment of surfaces of walls of any description, complete all as specified and directed.

M&L for preparation of old undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of newly or old undecorated surface of walls and applying two coats of Apex Ultima paint over a coat of primer, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection and similar works including finishing the surface of concrete topping even and fair without using extra cement, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and brusing neat cement slurry with 3 kg cement per Sqm, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 16mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in riser of steps / pillars / skirting / dados over and including 10mm thick rendering in CM 1:4 to recieve stone slab, complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in floor finishes, finishing the surface of concrete topping even and smooth without using extra cement, complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in surface channel / drain etc. including necessary formwork, complete all as specified and directed.

S&F stainless steel peg set of six of size 450mm x 35mm x 3mm, complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc, including dismantling of existing old plain or corrugated asbestos cement sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc, complete all as specified and directed.

M&L for 20mm thick rendering in CM 1:4 on flat roof surface mixed with liquid water proofing admixture @ 0.200 ltr per 50 kg of cement bag as per manufacturer's instructions, finished even and smooth without using extra, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of BOQ.

M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc. including dismantling existing water proofing treatment of any description, complete all as specified and directed with the following specifications :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 Litre / Sqm manufactured by the same agency as that of APP with adensity of 0.87-0.89 Kg per litre at 25 degree centigrade on preparared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non-woven polyster fiber of weight not less than 160 gsm/sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane, physical property of membrane shall be as under :- (i) Membrane weight not less than 3.60 Kg/Sqm. (ii) Non woven polyster weight not less than 160 gsm/Sqm. (iii) Softening point of membrane not less than 150 degree celcius. (iv) Joint tensile strength - longitudinal not less than 650 Sqcm and transverse not less than 450 Sqcm at 230 degree celcius. (v) Tear strength - Longitudinal not less than 300 N and transverse not less than 250 N. (vi) Elongation and reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 kg/sqcm.

S&F PVC solid frame fixed in Cupboard with x-sectional area of frame between 20 Sqcm to 25 Sqcm, complete all as specified and directed.

S&F factory made 18mm (+ 0.7mm) thick PVC sheet one side prelam sheet for cupboard shutter of density 600kg/Cbm bent 90° and finish at all edges at level for making edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape etc, complete as per direction of Engineer-in-Charge and manufacturer's specifications.

S&F pressed steel frame of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including filling of PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) in frames/hold fast blocks, complete all as specified and directed.

S&F 40mm thick 2nd class hard wood plain framed factory made, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003, complete all as specified and directed.

S&F box type steel windows/ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and sheet glass shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and other fittings such as hinges, tarred holdfasts and 10mm square bar grills at spacing as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3, complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of newly or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F continous (Piano) type hinges, mild steel, bright finish or electrogalvanised with wide of flaps 30mm, complete all as specified and directed.

S&F hasp and staple of size 125mm, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with SS screws, complete all as specified.

S&F aluminium handles cast type anodised of size 100mm long, ISI marked, complete all as specified.

S&F aluminium handles, cast type anodised of size 125mm long, ISI marked, complete all as specified.

S&F ball catcher with proper magnetic effect fixed with shutter, complete all as specified and directed.

S&F 200mm long, aluminium anodised, barrel tower bolt of extruded section, ISI marked, complete all as specified.

S&F 300mm long mild steel sliding door bolt, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to shutter, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 20mm dia stainless steel curtain rod with 1.0mm thick wall thickness and each length not more than 1.5 Metre including a pair of brackets and knobs with each length/piece, fixed on doors and windows opening for hanging curtains, complete all as specified and directed.

S&F galvanized stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in back filling of chowkhats, hold fast and the like including use of necessary form work, complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exc 6 metre mean radius, built in CM 1:6, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floors or pavement, path etc, complete all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block, white cement layer coated with epoxy coating (Red/Yellow), built with grey cement and pigment of any shape and size, confirming to IS 15658-2006 (M-40 Grade) over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form moulds etc, complete all as specified and directed.

M&L for rolled steel sections (conforming to Fe-290, Gde E- 165) as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting platess, complete all as specified and directed.

Surface dressing in any type of soil not exc 15cm deep and getting out, complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation or for shafts, wells, cesspits, manholes, pier holes, laying of cables/pipes etc. and getting out in any type of soil, complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated material (soil) not exc. 50 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point, complete all as specified and directed.

M&L for brick work with fly ash bricks (old size), straight or curved on plan exc 6 metre mean radius built in CM 1:6, complete all as specified and directed.

M&L for half brick thick brick work using fly ash bricks (old size), straight or curved on plan, built in CM 1:4, complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for TMT bars 5mm and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for formwork to sides of concrete fair finished surfaces of foundations, footings bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work verticle or batter, complete all as specified and directed.

M&L for formwork to sides and soffits of concrete fair finished surfaces of floor or roof beam, complete all as specified and directed.

M&L for formwork to sides/faces of concrete fair finished surfaces of chajjas and similar items including edges, complete all as specified and directed.

M&L for formwork to sides of concrete fair finished surfaces of pillars, struts, posts, piers, columns etc, complete all as specified and directed.

M&L for formwork to soffits of concrete fair finished surfaces of suspended slabs such as roof slab, floor slabs, landings and similar works not exc 200mm thick, complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm, complete all as specified and directed.

M&L for RCC M-25 Design mix (using 20mm graded crushed stone aggregates) as in foundation including footings, foundation beams, plinth beams, base for columns etc. basement slabs and mass concrete, complete all as specified and directed.

M&L for RCC M-25 Design mix (using 20mm graded crushed stone aggregates) as in beams, cantilevers, lintel over 1.5 mtr span etc, complete all as specified and directed.

M&L for RCC M-25 Design mix (using 20mm graded crushed stone aggregates) as in chajjas etc, complete all as specified and directed.

M&L for RCC M-25 Design mix (using 20mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts etc, complete all as specified and directed.

M&L for RCC M-25 Design mix (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams, columns etc, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces of ceiling / top and sides of chajjas/facia of roof projection including necessary formwork, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

S&F 30mm thick factory made solid pannel PVC door shutter (wood grain colour sheets on both sides), style, consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour and as gap insert for top rail & bottom rail panelling of wood grain colour sheet to be fitted in MS frame welded / sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specification & drawing.

S&F solid PVC door frame of size 75mm x 45mm (suitable for moulded door), made out of 5mm wood grain printed PVC sheets and edges shall be painted to match printed sheet as reinforced with 19mm square MS tube and fixing in opening as specification & drawing, complete all as specified and directed.

S&F 3mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F butt hinges, 100mm long, medium weight, cold rolled, mild steel, ISI marked, complete all as specified.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked, complete all as specified.

S&F 150mm long, aluminium anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified.

S&F aluminium handle, cast type, anodised of size 150mm long, ISI marked, complete all as specified.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floor, paving etc. finished the surface of concrete topping even and rough, complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (Square / Rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 450mm x 300mm x 7mm thick as on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick plaster in CM 1:4, complete all as specified and directed.

S&F rotational moulded polyethlene water storage tank of capacity 500 litres, three layers (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified in SSR Part-I and directed.

S&F ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed.

M&L for 15mm bore steel water tubing 'medium grade' galvanised including short lengths, fixed to walls / concealed in walls/ceiling or laid in floor, complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc, complete all as specified and directed.

M&L for 20mm bore steel water tubing 'medium grade' galvanised including short lengths, fixed to walls / concealed in walls/ceiling or laid in floor, complete with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc, complete all as specified and directed.

S&F 15mm bore CP brass, fancy type bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F stainless steel gratings 75mm dia, fixed with cement motar, complete all as specified and directed.

S&F vitreous china wash hand basin, counter type, coloured, flat back of size 630mm x 450mm excluding pillar tap but including CP brass waste coupling and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe of 32mm dia, complete all as specified and directed.

S&F 15mm bore CP brass fancy type Pillar tap, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinging device including connections to drain or outgoing pipe and to flushing pipe anti syphonage pipe etc, complete all as specified and directed.

S&F PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet ball valve and handle with and including brackets and PVC bend pipe 60/90cm long etc, complete all as specified and directed.

S&F PVC connection 15mm size of length 450mm with PTMT nuts, complete all as specified and directed.

S&F CP brass tubular towel rail 20mm dia 'D' type, 60cm long between flanges including brackets and fixed to walls, complete all as specified and directed.

S&F soap dish, stainless steel, approximate size 160mm x 160mm x 90mm, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors / walls, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs upon drainage system / manholes including necessary form work etc, complete all as specified and directed.

M&L cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as bed to drain pipes including forming cardles, haunching against the pipe for 150mm bore pipe, complete all as specified and directed.

M&L for 150mm bore SGSW (salt glazed stone ware) drain pipe, laid in trenches and jointed, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed.

Extra for forming fair finished drain or channel 15cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc, complete all as specified and directed.

M&L for framed work such as grills, gratings, manhole's cover etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work for portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc. conforming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for glazed ceramic designer coloured tiles (Premier quality) of size 450mm x 350mm x 7mm thick, set and jointed in neat cement slurry and pointing in colour cement to match the shade of tile over and including 10mm thick plaster / screed bed / bedding layers in CM 1:3, complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in coping, complete all as specified and directed.

S&F rotational moulded polyethlene water storage tank of capacity 1000 litres, three layers (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified in SSR Part-I and directed.

Cutting to existing GI tubing for alterations or additions for 20mm bore pipe, complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Excavating in post holes (or similar holes) each, not exc 0.50 Cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exc 50 mtr and making good surface, complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregetes) as in foundation and mass concrete, complete all as specified and directed.

M&L for brick work with sub class ‘B’ (old size) bricks, straight or curved on plan exc 6 metre mean radius, built in CM 1:4, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or cement concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match with existing surfaces, complete all as specified and directed by Engineer-in-Charge.

M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FR PVC insulated unsheathed fire retardent copper conductor cable 1100 volts grade in and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8mm including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FR PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed by Engineer-in-Charge.

All as per srl item No. 122.00 above but for 5 pin 5 Amps socket outlet on independent board controlled by one switch 5 Amps one way, complete all as specified and directed.

All as per srl item No. 122.00 above but for 2/3 pin 5 Amps socket outlet on same board controlled by one switch 5 Amps one way, complete all as specified and directed.

All as per srl item No. 122.00 above but for 15 Amps socket outlets point using 2.5 Sqmm FR PVC insulated multistranded copper conductor cable including 2.5 Sqmm FR PVC insulated unsheathed multistranded copper conductor cable as earth wire.

S&F modular socket outlet 6 Amp, 2/3 pin mutipurpose, 2 module complete all as specified and directed.

S&F modular socket outlet 5/15 Amp, 2/3 pin multi purpose, 2 module, complete all as specified and directed.

S&F modular switch 1 way 6 Amp, 1 module, complete all as specified and directed.

S&F modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings with polycarbonate body, complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F modular fan step regulator, step type suitable for 1200/1400mm sweep ceiling fan, hum free, 120W, 2 module, hum free and connecting electrically, complete all as specified and directed.

M&L for submain wiring with two single core FR PVC insulated cable 2x6 sqmm (nominal dia) copper conductor (multistrand) and drawing in and including PVC concealed conduit pipe, ISI marked including 1x6 sqmm multistranded copper conductor FR PVC green insulated unsheathed cable for earth continuity, complete all as specified and directed. Note:- Two run of cable with one run of earth wire and PVC conduit shall be measured and paid for as one length.

S&F surface mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative luminaire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F surface mounted 1x10 Watt LED tube light fittings (2 feet long), prewired, decorative luminaire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F bulk head 10 Watt LED light fitting IP-43 in engineering plastic housing with clear primatic diffuser complete with all acessories, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm as required, complete all as specified and directed.

S&F in replacement ceiling fan 1200mm sweep, BEE, 5 Star rated, white including making connection using 3 core 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose and testing after fixing, complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board, double door, single pole & neutral 240 volts 08 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed by Engineer-in-Charge.

S&F sheet metal enclosure MCB distribution board, double door, single pole & neutral 240 volts 02 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCB SP 6-32 Amps, 240 volts, 50 Hz, 10 KA repturing capacity, 'C' curve, complete all as specified and directed.

S&F in replacement of MCB SPN 10-40 Amps, repturing capacity 10 KA, 'C' curve, 240 volts, 50 Hz, complete all as specified and directed.

M&L for earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of welding including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 3 of SSR Part I (2009) including 20mm bore GI watering pipe 'medium grade' with funnel and wire mesh, GI protection piple 'light grade' 15mm dia from earth pit to main board including PCC pit in PCC 1:3:6 type C-2 (using 20mm graded stone aggregate), angle iron frame of size 40mm x 40mm x 3mm with hold fast embeded in PCC, RCC pit cover with suitable handle, complete all as specified and directed by Engineer-in-Charge. Notes :- (i) Returning filling in only vegetable soil. (ii) Earting pit should not be shink down.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades and re-fix the same after repair including testing, complete all as specified and directed by Engineer-in-Charge.

S&F LED Lamp 12 Watt.

Supply and laying in trenches/on wall/on pole/in duct/through protection pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables heavy duty LT cable, 1100 volts grade with aluminium conductor cross sectional area 16 Sqmm 2 core including retrieving/taking out/taking down old unserviceable cable from duct/trenches/pipes/pole/wall etc. including brick cover and protection pipe and disconnecting the connections. Note :- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

Supply and laying in trenches/on wall/on pole/in duct/through protection pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables heavy duty LT cable, 1100 volts grade with aluminium conductor cross sectional area 10 Sqmm 2 core including retrieving/taking out/taking down old unserviceable cable from duct/trenches/pipes/pole/wall etc. including brick cover and protection pipe and disconnecting the connections. Note :- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

M&L for 40mm bore galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings such as MS clamps of size 25mm x 4mm, nuts, bolts, washers etc, complete all as specified and directed.

M&L for sand cushioning to underground cable 8cm below the cable and 15cm above the cable, complete all as specified and directed.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick, complete all as specified and directed.

S&F exhaust / ventilating fan, made out of high quality engineering plastic, resistant to colour change with anti static properties, 300mm sweep suitable to work on 230 volts 50 Hz AC including connecting to ceiling rose, complete all as specified and directed by Engineer-in-Charge.

Supply & Laying 150mm bore reinforced cement concrete (RCC) pipes, class NP-2 with one collar per length of pipe, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in benching, coping and haunching etc, complete all as specified and directed.

M&L for mild steel framed using angle iron as in manhole cover frame including one coat of black Japan paint after preparation of surface etc.conforming to Fe-410 Gde E-250 Quality-B, complete all as specified and directed.

M&L for 100mm bore cast iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors or fixed to walls, complete all as specified and directed by Engineer-in-Charge.

M&L for Septic tank including excavation and earth work in any type of soil, foundation in PCC 1:4:8, brick work with old size bricks in CM 1:4 including RCC 1:2:4 type B-1 cover slab and precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc. complete for 25 users, complete all as specified and shown on drg TD Drg No CEPZ/C-TD/013/13 sheet 1/5 to 5/5.

M&L for Soakage well including excavation and earth work in any type of soil, foundation in PCC 1:4:8, brick walls of honey combed and solid in CM 1:4, RCC cover slab including RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame, intercepting and screen chamber, filling with brick bats at required height etc. complete of size 2.40 Mtr dia X 3.00 Mtr deep, complete all as specified and shown on drg TD Drg No CEPZ/C-TD/013/13 sheet 1/5 to 5/5.

M/S J N TRADERS

Ravinder Singh

M/S INDIAN ELECTRICAL

abrol enterprises

M/s. RAMESH KUMAR