Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹28.0 L+₹1.1 L (4.22%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bidder | |
| 3 | L3₹28.5 L+₹1.6 L (6.09%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest bidder | |
| 4 | L4₹29.7 L+₹2.8 L (10.3%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest bidder | |
| 5 | L5₹33.0 L+₹6.1 L (22.6%)Rejected-Finance H NO 411 SECTOR 4 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU | J K | 180015 | L5 | Rejected-Finance Being other than lowest bidder |
Tender Value
₹34.0 L
EMD Value
₹72,000
Closing Date
30 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
SR OF COOK HOUSE AND WASHING POINT AT BLDG No TA 26 JCOs MESS AND BLDG No T 753 3 COY ORs MESS AT 14 CORPS OP SIG REGT AND SR TO BATHROOM AND TOILET OF BLDG NO T 46 T 47 AND T 48 OF DEF AND EMP COY HQ 14 CORPS UNDER GE 865 EWS
2022_MES_566002_1
865/EWS(NIT-91)/2022-23
Open Tender
Civil Works
Item Wise
270 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹72,000
Yes
16 Feb 2023
29 Nov 2022
7 Jan 2023
29 Nov 2022
30 Dec 2022
16 Dec 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L Glazed ceramic coloured tiles in vertical surfaces (350 X 250X7mm ) / (450x350x7mm) /(300x200x7) thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over rendering 10mm thick in CM (1:4) , for dado/skirting tiles.complete all as specified and as directed by the Engr-in-charge. Make as per PS.
Demolition of un reinforced cement concret as in ground floor of any description and in any position not other wise specifically provided for and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in sub base/ levelling course for laying of screed bed complete all as specified by Engr-in-Charge.
M&L for vitrified tilees light shade of 10 mm thick (square/rectangular) polished bright, area of tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thich screed bed or bedding layer in cement mortar 1.6 compelte all as specified and directed by Engr-in-Charge. Make as per PS.
M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc .11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the 15mm thick screed bed with CM (1:6) laying floor tiles complete all as specified and directed by Engr-in-Charge.
M&L Machine cut pre polished Kota stone slab flooring 20-25 mm thick over 15mm thick cement screed bed or bedding layer in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting, etc and screed bed with CM (1:4) 20mm thick laying floor tiles complete all as specified and as directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m and change of direction complete all as specified and as directed by Engr-in-Charge.
Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed
Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in framed work complete all as specified and directed.
M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron ploythene film and 3mm thick foam as per manufacturer's instructions, including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement all as specified and directed.
S&F Gypsum ceiling board 7mm to 8 mm thick in 600 x 600 mm pannel , ceiling tiles are laminated with white colour PVC film on the face side and a metalised polyster film on the back side conforming to IS-14862 type B category three GI frame, grid work, Hold fast, suspended with GI wire complete all as specified and directed.
M&L for 9mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to walls of any description or timper scantling with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD
M&L for 9mm thick prelaminated particle board, medium interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to ceilings of any description or timper scantling with screws to timber frame work, complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD
M&L for second class soft wood clean swan as in battens for grids of ceiling and lining, plain fillets exc 13 sqcm and n.exc 25 sqcm, square/ rectangular in section, secured with nails or brads to timber frame work as in fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling complete all as directed by Engr-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.
Taking down and refixing in the same opening of shutters of any descriptin exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters,including aluminium jali of 10 mm thick design/pattern as approved and side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified and directed By Engr-in-Charge.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs complete all as specified and as directed by Engr-in-Charge.
S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.
S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkatscomplete all as directed by Engr-in-charge.Make as per PS.
S&F for Aluminium, anodized, barrel tower bolts, ISI Marked, of extruded section 200 mm long, complete all as specified and directed by Engr-in-Charge.
S&F for Aluminium, anodized,door handle, ISI Marked, of extruded section 150 mm long, complete all as specified and directed by Engr-in-Charge.
S&F 100mm long mild steel, butt hinges of cold rolled complete all as specified and as directed.
S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.
S&F in Aluminium door closer hydraulically regulated designation No 3 , universal type, suitable for door shrtters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed compelte all as specified and directed by Engr-in-Charge. Make : As per PS.
Demolition of precast concrete block/Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Specified by Engr-in-Charge.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15 mm thick rendering in cement mortar 1:4 on fair faces/other than fair face of brick walls or on concrete surfaces, finished even and smooth without using extra cement with water proofing compound @200 ml per bag of cement complete all as specified and as directed by Engr-in-Charge.(WPC shall be measured and paid seprately)
Supply only liquid integral water proofing compound
M&L for rendering 10 mm thick rendering in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for preperation of new concrete /plastered surface of wall including chalk whitning and applaying two coat of distemper oil emulsion complete all as specified and as directed complete all as specified and as directed by Engr-in-Charge.
M&L for Complete removal of existing surfaces of walls of any description and applying two coats of weather coat paint on walls, filling gaps by putty after washing rubbing down and stopping of surfaces of wall, over a coat of primer complete all as specified and directed by Engr-in-charge.
M&L preparaton of newly plastered surfaces of walls of any description and applying two coats of weather coat paint over a coat of wall care putty applying till the surface smooth complete all as specified and directed by Engr-in-charge.
S&F Harrison rails, 19mm dia aluminium anodised curtain rods, with brackets, end bulbs, complete all as specified and as directed by Engr-in-Charge.
Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed by Engr-in-Charge.
S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with J or L hook and washers as in roofs /walls etc. with grade of zine coating 275 complete all as specified and directed by Engr-in-Charge.
Ditto all as per item No 41 above but except sheeting complete all as specified and directed by Engr-in-Charge.
S&F 0.8mm thick Galvanised plain mild steel sheeting, fixed with J or L hook and washers as in roofs /walls etc. with grade of zine coating 275 complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engr-in-Charge.
M&L for Steel work in tubular trusses purlins, rafter, vertical posts, crane gantries, rails and fastenings and heavy brackets framing including special shaped washer, plates, angles etc complete using ERW or induction butt welded tubes, or reviting confrming IS 1161 -1979 grade St 240 complete all as specified and directed by Engr in charge
S&F rolled sections as in main and cross beams, hip and jack rafters and running rails and guids for sliding doors fixed with angles cleats or other connections plate Fe 410 Gde E-250 complete all as specified and directed by Engr-in-Charge.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new/ old steel suraces and surfaces of any description incuding preparation complete all as specified and directed by Engr in charge
M&L for one coat of synthetic enamel paint on old steel surfaces or old corrugated sheets of any description incuding preparation complete all as specified and directed by Engr in charge
Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed by Engr-in-Charge.
M&L for plain sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.
M&L for preperation of old wooden surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamal paint all as specified and as directed complete all as specified and as directed by Engr-in-Charge.
M&L for preperation of new or previously untreated wooden surface any description of any description over 10cm in width or girth and applaying two coat of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed complete all as specified and as directed by Rngr-in-Charge.
M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.
M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.
M&L for 75mm thick PCC 1:4:8 type D 2 (using 40mm graded stone aggregate) as in sub base of floors/ pavings etc complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
S&F Rotational moulded polyethylene water storage tank, inner and out white, three layers, ISI marked (cylinderical vertical with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.Make as per PS.
Dismantling of 75/110 mm bore of cast iron /PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL
M&L for 110 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in- Charge. MAKE: SUPREME/ASHIRWAD/FINOLEX/ SFMC/ASTRAL
S&F PVC (SWR) bent 75 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) bent 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR)Tee 110 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR)Tee 75 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.
S&F PVC SWRfloor trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 in cement concrete (1:2:4), 20 mm graded stone aggregate complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) vent cowl 75 mm bore fixed to pipes of any description complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) 'S' trap of 110 mm bore fixed to pipes/ WC of any description complete all as specified and directed by Engr-in-Charge.
S&F for 30mm thick Flush shutter solid core construction both side veneered, with block board core commertial type fixed to chowkhat frame complete all as directed by Engr-in-charge.Make as per PS.
S&F for Aluminum, anodized, barrel tower bolts, ISI Marked, of extruded section 200 mm long, complete all as specified and directed by Engr-in-Charge.
S&F for 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by Engr-in-Charge.
S&F aluminum door handle cast type 150 mm in old or new position
S&F 100 mm long mild steel medium weight butt hinges cold rolled complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed by Engr-in-Charge.
M&L for plain sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-Charge.
S&F 20 mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including taking down of any description complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd
S&F 25 mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including taking down of any description complete all as specified. Make : JINDAL/KISAN/SFMC/Supreme/Kanha Plastic Pvt Ltd
S&F in repalcement of 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete, all as specified and as directed by Engr-in-Charge. MAKE: Cera Model Combiflush twin flush as per Cat Part No. B1020101 (Old Cat Part No 2603) or equivalent in HINDWARE/PARRYWARE
S&Fin Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, incl bedding with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate complete all as specified and as directed by Engr-in-Charge. Make: Cera/Hindware/Parryware
S&F swivel shower 125 mm dia of PTMT any colour for fixing with 15 mm bore ferrule complete all as specified and directed by Engr-in-Charge.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm, long complete all as specified and diected by Engr-in-Charge. Make: Prayag/Polytuf/Supreme
S&F in repair 15mm bore, chromimum plated brass, Bib tap screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. MAKE: PARYAG/POLYTUF/SUPREME
S&F in repair 15mm bore chromium plated, fancy type Stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, complete all as specified by Engr-in-Charge. MAKE: PARKO/MARC/ESS ESS/CERA
S&F in grating doom 125 mm dia of PTMT (minimum weight 60 gram) complete all as specified and directed by Engr-in-Charge.
S & F in repair towel rail 600mm long of aluminum 20 mm dia, D type fixed with and including chrominium plated brass screws and wooden/plastic cleatscomplete all as specified and directed by Engr-in-Charge.
M&L for preperation of new or previously untreated wooden surface any description of any description over 10cm in width or girth and applaying two coat of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed complete all as specified and as directed by Rngr-in-Charge.
Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc complete all as speciifed and directed by Engr-in-Charge
M&L for point wiring for one light point or fan point controlled by one light/exhaust fan controlled by one way switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.
All as per item No 54.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.
All as per item No 54.00 here-in-before but 1.5 Sqmm for one 3 pin 6 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.
All as per item No.54.00 above but using cable 2.5 Sqmm size with 2.50 Sqmm for eath continuty for one socket outlet 15 Amps 3/5 pin on independent board complete all as specified and directed by Engr-in-Charge
S&F in replacement for switch piano flush type one way single pole 5/6 Amp 240 volts complete all as specified and directed by Engr-inCharge.
S&F in replacement for socket outlet 2 in 1, 3 pin, 5/6 Amps on the same board complete all as specified and directed by Engr-in-Charge.
S&F in replacement switch socket outtlet 2 in 1,3 pin 5A combination on the independent bd complete all as specified and directed.
S&F in replacement for switch socket combination 2 in 1, 3 pin, 15 Amps on the independent board complete all as specified and directed by Engr-in-Charge.
S&F in replacement for ceiling rose 3 terminal, 3 phase/PVC/polycarbonate isolated body surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr-in-charge.
S&F decorative ultra slim round profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficent ready to use pack 18 Watt LED 6000K with connections 3 core copper wire from ceiling rose to fitting with complete accessories complete all as specified and directed by Engr-in-Charge.
S&F in replacement of LED bulb, 9 watt, 230 volt, 50 Hz, AC complete al las specified and directed by Engr-in-Charge.
S&F in lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.
Supply and fixing of exhaust fan, heavy duty steel body, AC single phase 230 volts of size 300 mm sweep with blades and frame and louvers complete all as specified and as directed.
Supply and fixing for MCB SPN 32 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.
Supply and fixing for MCB SP 5 to 32 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make: Make as per PS
Supply and fixing in replacement for MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 240 volt, 50 Hz and complete accessories concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc . Make as per PS.
S&F security light fitting new generation energy saving and environmental friendly long life versatile pressure die cast aliminium IP-66 high power LED light 25 watt complete with fixing arrangement including bracket nut bolt etc all as specified and directed.
M&L point wiring for 3 pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 Sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing/ caping with sunk cast iron.
S&F switch socket outlet, 3pin 5 Amps piano flush type single pole ISI marked complete.
S&F switch socket outlet 2in 1,3 pin 5 and 15 Amps piano flush tupe single pole ISI marked complete.
S&F switch piano flush tupe single pole one way 5 Amps ISI marked complete.
S&F socket outlet 3 pin 5 Amps flush type complete.
S&F ceiling rose surface bakelite two or three terminal all as specified and directed.
S&F of LED 36 watt recessed 2' x 2' luminari (warm/white) to enhance the delight of occupants with confortable experance through its design and glare free soft illumination and connection of 3 core copper wire with all assessories complete. Make Bajaj product code 112801 luminaire type BZRSQL 36W GZi WH or equivalent in HPL/ Havells/ CG.
Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point, etc, t complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )
Rampal Singh Contractor
PARIDHI CONSTRUCTION
M/S KARAN BUILDERS
Mehar Enterprises
M/S SHUBHAM ENGINEERS & BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .