PERIODICAL SERVICES AND CERTAIN B/R REPAIR TO OTM AND MD ACCN AT J-1 and J-2 LOCATION UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and effloresence salts and trading oil and greasy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces with cement or putty and applying One coat of white wash on walls complete all as specified.

Ditto all as per ser item No 01 above but one coat of white wash on ceiling surface complete all as specified and as directed.

Ditto all as per ser item No 01 above but applying one coat of oil bound distemper on wall (white or tinted) complete all as specified and as directed.

Preparation of old decorated/treated surface of walls including removing existing treatment by rubbing, scrapping, washing and applying two coats of oil bound distamper over a coat of primer complete all as specified and as directed.

Ditto all as per ser item No 01 above but applying one coat of oil bound distemper on ceiling complete all as specified and as directed.

Ditto all as per ser item No 01 above but applying one coat of Plastic emulsion paint on wall complete all as specified and as directed.

M & L for preparing of old surfaces of walls and applying 1mm thick of wall care putty on walls and finished smooth complete all as specified and as directed.

M & L for preparing of old surfaces of ceilling and applying 1mm thick of wall care putty on Ceilling and finished smooth complete all as specified and as directed.

Prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of (white or tinted) complete all as specified.

French polishing on surfaces of any description, width or grith including cleaning and preparing the surface including a coat of wood filler old workcomplete all as specified and as directed.

Prepration of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified

Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces)and applying one coat of cement base paint complete all as specified.

Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces)and applying Two coat of cement base paint complete all as specified. Note : Work shall be executed in the buildings up to 4th storey and contractor has to make his own arrangement for necessary scaffolding and safety of works man/labours. Unit rate quoted to be deemed inclusive of these aspects for item no 1 to 13.

Taking down cement plaster on brick or stone walls etc including Racking out joints hacking to key scrubbing down with water etc up to 4 th story complete all as specified and as directed by Engr-in-Charge

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 (externally) finished even and fair without using extra cement complete all as specified .

M&L Rendering 15 mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, finished Even and Smooth,without using extra cement complete all as specified and as directed.

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement

M&L Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified new surface of walls

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete .

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified

M&L for Vitrified tiles 10 mm thick light shade (double charged) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and as directed.

M&L for Vitrified tiles 10 mm thick light shade (double charged) (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and as directed.

M&L for non skid ceramic tiles/ non skid coloured tiles premium quality 7 to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles premium quality 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed..

M&L for glazed ceramic coloured tiles premium quality of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:6 complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D-2 as in subbase, complete all as specified and as directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 grade, over 25mm thick sand cushioning complete all as specified and as directed.

M&L for Cement concrete tiles with grey cement and pifment of size 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished over and incl. screed bed 15mm thick in cm 1:6 complete all as specified and as directed.

M & L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone crushed aggregate as in flooring for laying floor finish all as specified.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and as directed.

Supply & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross "T" of size 15x32mm made of 0.30 mm sheet, spaced between main "T" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-Charge.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately),complete all as specified and as directed.

S & F PVC Wall lining 5mm thick consisting Hollow section plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications.

Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets as in roof coverings.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as spcifed and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quaity 'A' , complete all as specified and as directed.

S&F 2mm thick fibre glass reinforced tranclucent corrugated sheeting with two corrugation side lap,fixed with coach screw and washer in roof,wall etc all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame), n. exc 1.5 Sqm, complete all as specified

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.0 sqm each and removal to store complete all as specified

Taking down shutters of n.exc 1.00 sqm each, complete all as specified and as directed.

Taking down shutters of exc 1.00 sqm but n. exc 2.00 sqm each, complete all as specified and as directed.

S & F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

S&F 2nd class H/W plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position .

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 25mm wide, 6mm thick 2nd class HW lipping on edges complete all as specified and as directed.

S&F 40 mm dia powder coated cup board knobs fixed with nut, screws and washer of mild steel bright finish complete all as specified.

S&F 20mm stainless steel pipe for cupboard with fixing brackets, stops, rollers etc. complete all as specified and as directed

S&F Mild steel rollers and plate suitable for sliding drawers, complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm complete all as specified and as directed.

S&F stainless steel magnetic catcher of any colour of size 48 MM X 14 MM X 14 MM,berrium ferrite magnet of size 25mm x 10 mm x6 mm,abs vergin plastic,fitted with 2 nos screw of 13mmx4mm csk head with zinc plated

S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.24 (a) of SSR Part-I ,complete all as specified and as directed.

S&F for 30mm 2nd class H/W glazed skelton shutter for window/ventilator, open rebated and prepared to receive glass , gauze etc (with sash bars) edges of framing plain chamfered or rounded , fitted with cut and mitered beads for securing glass etc; size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F 100mm size MS butt hinges medium weight cold rolled (zinc cromate)., complete all as specified and as directed.

S&F 100 mm butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long, complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and as directed.

S&F Extruded aluminium alloy handles, fabricated type,anodised 100 mm in size, complete all as specified and as directed.

S&F Extruded aluminium alloy handles, fabricated type,anodised 150 mm in size, complete all as specified and as directed.

S&F Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and as directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

S&F for 100 mm size Hasp and staple, aluminium anodised, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified

M&L in repair 25 mm dia mild steel pipe curtain rod , powder coated fixed with & including MS powder coated hooks/brackets and decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads as directed.

S&F in repair sheet glass ordinary quality 3.0 mm thick in any size pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

S&F in repair figured Glass 3.0 mm thick, Pin Head type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

S& F Toughned glass 12.0 mm thickness as in hinged doors,partitions automic doors and similar work including fittings, cutting to shape ,drilling holes required .

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

All as per item No. 79 above but in repairs complete.

S & F for powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

M&L for Mortice lock, vertical type, size 100mm 4 lever Brass body fixed in repair, complete all as specified and as directed.

S&F 3mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter complete all as specified and as directed.

S&F in repair 5.5 mm thick in square exc 0.50 Sqm each pane ordinary quality sheet glass for fixing in aluminium frame work including rubber beading and necessary clips,complete all as specified and as directed.

S&F in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, Complete all as specifed and as directed.

S&F 1000 ltr white coloured UV protected Anti microbial rotational moulded polythene water storage tank cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, complete all as specified and as directed.

S&F 25mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and as directed.

S&F in repair vitreous china Basin with full pedestal with fixing Accessories , white, flat back size 570 x 470x190 mm , MAKE : JAGUAR or equivalent model of HINDWARE/ Parryware/ Cera (as approved ) complete as all specified and as directed.

S&F in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of MAKE : JAGUAR or equivalent model of HINDWARE/ Ess- Ess/ Cera (as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S&F for chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and as directed.

S&F for chromium plated brass Sink mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and as directed.

S&F in repair Body Bib Cock (Foam Flow) with Flange of MAKE : JAGUAR or equivalent model of HINDWARE/ Ess- Ess/ Cera(as approved) suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

S & F in repair hand shower (health faucet) with 8mm dia, 1.2 mtr long flexible tube & wall hook of MAKE : JAQUAR or equivalent model of HINDWARE/ Ess- Ess/ Cera (as approved), suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed.

S&F in repair Toilet roll holder with flap of MAKE : JAQUAR or equivalent model of HINDWARE/ Ess- Ess/ Cera (as approved) complete all as specified and as directed.

S&F Steel rolling shutters without ball bearing as specified including top cover anchoring rod hasp and staple and one coat of primer thickness of latch 1.25mm erected in position as indicated with gear operated box and \crank handle complete all as specified and as directed.

M&L Ball bearing for rolling shutters as specified .

Petty repair to steel rolling shutter system of any size and description incl repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain incl necessary welding, greasing etc and making the shutter complete serviceable all as per existing pattern as specified

S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and as directed.

Note for above work:- (a) Contr shall submit at least three samples of material for approval of GE. (b)Mke of sanitary fittings:- Jaquar/ Cera/ Ess-Ess (c)' Make of plumbring work:- Parryware/ Hindware. (d) Make of Non skid/ Glazed/ Vitrified tiles:- Kajaria/ Somany/ Orien bell. (e) Make of Galvalume sheets :- TATA Blue Scope/ JSW/ RINL. (f) After completion of work area shall be made clean all spot/ Moss/ Debris shall be removed from site without any extra cost of Govt.

M/s SUDHIR KUMAR (BID ID -3362212)

SANDEEP JHANJI CONSTRUCTIONS (BID ID -3356170)