SPECIAL REPAIR TO BLDG NO P-4D, T-28, T-32, T-31 and T-187 AT MT REAR PXE, BALASORE UNDER GE (I) R and D CHANDIPUR

Amount

Dismantling of tile work any size in floors and wall laid in cement mortar including complete all as specified and directed.

M&L for Glazed Ceramic floor tiles of size 400mm x 400mm (thickness of tiles as per manufacturer instruction) of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, laid on & including 20 mm thick cement mortar 1:4, jointing with grey cement slurry @ 3.30 Kg/ Sqm including pointing the joints with white cement and matching pigments etc. complete all as specified and directed.

All as per item No 2.00 here-in- before but in skirting, risers of steps and dados, over & including 10 mm thick backing of cement mortar 1:3 and jointing with grey cement slurry @ 3.30 Kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

M&L for Ceramic glazed wall tiles 450mm x 300mm (thickness of tiles as per manufacturer instruction) in all colours, shades as in skirting, risers of steps and dados, over & including 10 mm thick backing of cement mortar 1:3 and jointing with grey cement slurry @ 3.30 Kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

S&F Non skid Ceramic floor tiles of size 400mm x 400mm (thickness of tiles as per manufacturer instruction) in floors etc. in all colours shades, laid on & including 20 mm thick cement mortar 1:4, jointing with grey cement slurry @ 3.30 Kg/ sqm including pointing with white cement and matching pigments etc. complete all as specified and directed.

M&L for vitrified floor tiles (double charge) of size 600mm x 600mm (thickness of tiles as per manufacturer instruction) in all colours and shades, laid on & including 20mm thick cement mortar 1:4, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. Complete all as specified and directed.

All as per item No 6.00 here-in-before but in skirting, riser of steps, over & including 10 mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. Complete all as specified and directed.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, complete all as specified and directed.

M&L for Polished Granite stone flooring in required design and patterns, with 15-18 mm thick stone slab over 20 mm thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete all as specified and directed.

M&L for 18-20mm thick Kota stone slab flooring over & including 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete all as specified and directed.

M&L for 18-20mm thick Kota stone slabs in risers of steps, skirting, dado and pillars laid on & including 10mm thick cement mortar 1:3 backing and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead, complete all as specified and directed.

M&L for 50mm thick Plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in subbase complete all as specified and directed.

M&L for heavy duty vitrified paving tiles 300mm x 300mm (thickness of tiles as per manufacturer instruction) in footpath jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, over & including 20 mm thick bed of cement mortar 1:4 all complete as specified and directed.

M&L for 50 mm thick plain cement concrete 1:3:6 type C1, (using 20mm graded stone aggregate) as in path, plinth protection or hardstanding and finished the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of 15 to 40 mm dia G.I. pipe on wall/floor complete all as specified and directed.

M&L for 20mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings (brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc.), including necessary cutting chasing in masonry wall/column etc. joints of pipes & fittings with one step CPVC solvent cement including testing of joints complete all as specified and directed.

M&L for 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings brass threaded fittings (brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc.), including fixing the pipe with clamps at 1.00 m spacing and jointing of pipes & fittings with one step CPVC solvent cement including testing of joints complete all as specified and directed.

S&F on terrace triple layer HDPE water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including taking down old tank complete all as specified and directed.

S&F 20 mm nominal bore ball valve (brass) of approved quality, high or low pressure, with plastic float complete all as specified and directed.

S&F in 20 mm CPVC Ball Valve (Gate Valve) complete all as specified and directed.

S&F in 25 mm CPVC Ball Valve (Gate Valve) complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. area n. exc. 3 Sqm complete all as specified and directed.

S&F for powder coated (minimum thickness 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed.

S&F for powder coated (minimum thickness 50 micron Anodised) aluminium window and ventilator shutters sliding/openable type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. (Note : Glass and wire mesh shall be measured and paid separately.)

S&F 5.00 mm thick tinted sheet glass complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staple complete all as specified and directed.

S&F in 4mm thick Figured glass, pin head type and glazing in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Frame size 65 x 125 mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modulus of elasticity 900 N/Sq mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.. Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

S&F 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type mosquito proof door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note : Stainless steel butt hinges shall be paid separately)

S&F factory made P.V.C. door frame of size 50x47 mm with wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using SS. screws of 65/100 mm size, complete as per manufacturer's specification, drawing & and as directed.

S&F 30 mm thick plain PVC door shutters factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per manufacturer's specification, drawing & and as directed.

S&F for bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc. complete.

M&L for painting with two coats of synthetic enamel paint of approved brand and manufacture to give an even shade including preparation of surface and one coat of red oxide primer on new steel surfaces complete all as specified and directed.

M&L for mild steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position as required. In steel Door and Ventilator, frames, guard bars, ladder, railings, brackets, MS plates, nut and bolts, gates, grill and similar works complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

S&F for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161- 1979 grade St.-240 complete all as specified and directed.

Taking down asbestos cement corrugated or semi corrugated sheet in roof covering complete all as specified and directed

S&F prepainted coloured galvalume sheet coated with aluminium zinc and silicon based GI corrugated sheet of total coated thickness 0.50mm (minimum) and finish with resin coat on both side having tensile strength of 550 MPa confirming to IS-15965:2012 and sheet should have protective guard film to avoid scratches during transportation use as in roof covering/cladding to wall fixed with self taping screws including EPDM washer complete all as specified and directed.

S&F prepainted coloured galvalume sheet coated with aluminium zinc and silicon based GI sheet as in rigid plain sheet 0.60 m wide of total coated thickness 0.50mm (minimum) and finish with resin coat on both side having tensile strength of 550 MPa confirming to IS-15965:2012 and sheet should have protective guard film to avoid scratches during transportation use as in roof covering/cladding to wall fixed with self taping screws including EPDM washer complete all as specified and directed.

Cutting chases, pinning in, making good to facings in brick work where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exceeding 15cm girth complete all as specified and directed.

S&F 150 mm long aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

S&F 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

S&F ISI marked 100x60x2.50 mm stainless steel butt hinges (heavy weight) conforming to IS : 12817 with stainless steel screws etc. complete all as specified and directed.

S&F aluminium sliding door bolts with hasp, staple length of bolt 300mm and 16mm dia, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed.

S&F aluminium hanging Twin rubber stopper floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed.

Dismantling of ceiling boards (fibre, Pulp, Insulation) of any thickness, including cover fillets complete all as specified and directed.

S & F false ceiling using Anodised aluminium snap grid frame work for false ceiling as per manufacturer instruction with 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws, including hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

M&L for 15 mm thick cement plaster in two coats under layer 10 mm thick 1:4 cement plaster and a top layer 5 mm thick cement plaster 1:4 mixed with WPC as per manufacturer instruction and finished the surface even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for 5 mm thick cement plaster on ceiling in cement mortar (1:3) and finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster in cement mortar (1:6) and finish the surface even and smooth without using extra cement as on walls complete all as specified and directed.

M&L for Distempering (OBD)Two coats on new work wall including one coat of alkali resistant primer with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete including preparation of surface, as per manufacturer's specification complete all as specified and directed.

M&L for White washing on new ceiling surface three coats with lime to give an even shade including preparation of surface complete all as specified and directed.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. and Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete and distempering surface with two coats of 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including one coat of alkali resistant primer complete all as specified and directed.

M&L for removing old cement base paint, by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Finishing walls with two coats of Premium Acrylic smooth weather coat paint of required shade (Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M & L for Finishing walls with Acrylic smooth weather coat paint of required shade : New work (Two) coat applied @ 1.67 ltr/10 sqm over and including one priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

M&L for brick work with Fly ash old size brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 complete all as specified and directed.

All as per item No 60.00 here-in-before but except bricks (using old size bricks obtained from item No-59.00)

M&L for minimum two coats of White washing with lime to give an even shade on old ceiling surface including preparation complete all as specified and directed.

S&F in repair Stainless Steel (grade 304) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including 600mm long flexible waste PVC pipe, painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board (915mmx460 mm x 0.8mm thick bowl size 410mm x 330mm and bowl depth 160 mm) complete all as specified and directed.

S&F in repair 15 mm nominal bore C.P. brass bib cock of approved quality complete all as specified and directed.

S&F in repair White Vitreous China Wash hand basin size 550x400 mm with a single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including 450 mm long Flexible PVC pipe, painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and directed.

S&F in repair 15mm dia C.P. brass stop cock (concealed) of standard design and of approved make complete all as specified and directed.

S&F in repair C.P. brass angle valve for basin and flushing cistern 15 mm dia of approved quality complete all as specified and directed.

S&F in repair 100 mm dia SS grating for kitchen wash hand basin and bathroom complete all as specified and directed.

Dismantling C.I. or asbestos 100/75 mm rain water pipe with fittings and clamps complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps complete all as specified and directed.

S&F in repairs 40 mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs 40 mm bore PVC (SWR) bends/Elbow of any radius complete all as specified and directed.

S& F in repairs 75 mm PVC Nahani Trap complete all as specified and directed.

S&F in repair White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

S&F in repair EWC. pan with ISI marked white solid plastic seat and lid white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, cutting and making good the walls and floors wherever required complete all as specified and directed.

S&F in repair for Health Faucet (ABS) with 1 Mtr long Tube & Hook 15 mm bore complete all as specified and directed.

S&F in repair for CP Two Way Bib Cock 15 mm bore complete all as specified and directed.

S&F in repair 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete all as specified and directed.

S&F in repair 15 mm nominal bore with 45 cm long unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour complete all as specified.

S&F in repair for 600x450 mm bevelled edge mirror of superior quality glass (of approved quality) complete with 6 mm thick hard board fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

S&F in repair C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter complete all as specified and directed.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, minimum 3 mm thick water proofing membrane weight not less than 3 Kg/Sqm, black finished reinforced with non woven polyester matt (weight not less than 150 gm/Sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane laid over & including 10 mm thick cement plaster of cement mortar 1:3 mixed with water proofing compound as per manufacturer instruction finished even and smooth surface including covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. including taking down existing water proofing treatment and removal from site complete all as specified and directed.. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound (ISI marked) of approved make complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 10mm nominal size derived from natural sources) complete all as specified and directed.

S&F in repair 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete all as specified and directed.

S&F in repair 20mm dia stainless steel curtain rods of wall thickness 1.25 mm with two fancy type SS brackets fixed with brass screws and wooden plugs etc. wherever necessary complete all as specified and directed.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete all as specifies and directed

S&F in repair 110mm SWR fitting Vent Cowl with wire mesh complete all as specified and directed.

M&L for Plain cement concrete 1:2:4 (using 20mm graded stone aggregate) in post, pilaster, struts, string or lacing courses, coping, bed blocks, anchor blocks etc. including cost of shuttering and finishing complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan, exhaust fan, call bell) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, etc. complete all as specified and directed.

M&L for point Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable etc. complete all as specified and directed.

M&L for point wiring for 05A independent switch socket board with 2X1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 1.5 Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing including suitable M.S box with hylem sheet complete all as specified and directed.

M&L for point wiring for power point 15A independent switch socket board and with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in & including surface/ recessed medium class PVC conduit along with 1 No. 4 Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing including suitable M.S box with hylam sheet complete all as specified and directed.

M&L for point wiring for One 3 pin socket outlet 5 amps on the same board with other switches wiring with copper conductor (FRLS) PVC insulated unsheathed cables of size 1.5 Sqmm 2 run and one run of 1.5 Sqmm for earth continuity to be drawn in & including PVC concealed conduit non metallic not less than 20 mm dia MS sheet metal switch / terminal box 1.2 mm thick and Hylam sheet switch including all necessary wall cutting for sinking's of boxes and making good disturbed surface to walls complete all as specified and directed.

Taking down Sub main/Sub circuit wiring of any type and size including conduit/ capping casing/batten for necessary repair/replacement complete all as specified and directed.

M&L for submain wiring using two runs of FRLSH grade PVC insulated unsheathed stranded copper conductor cable of size 6 sqmm and one run of 6 sqmm FRLSH grade PVC insulated unsheathed stranded single core copper earth wire to be drawn in and including at least 25 mm size PVC conduit(medium grade) in concealed wiring of suitable size dolly complete all as specified and directed.

Supplying and fixing 5 pin 5/6 A socket outlet flush type on the existing switch box/ cover including connections complete all as specified and directed.

Supplying and fixing 6 pin 15/16 A socket outlet flush type on the existing switch box/ cover including connections etc. complete all as specified and directed.

Supplying and fixing 5/6 A switch flush type on the existing switch box/ cover including connections etc. complete all as specified and directed.

Supplying and fixing 15/16 A switch flush type on the existing switch box/ cover including connections etc. complete all as specified and directed.

Supplying and fixing 3 terminal 5 A ceiling rose on the existing junction box/ wooden block including connections etc. complete all as specified and directed.

Supplying and fixing PVC angle holder including connection etc. complete all as specified and directed.

Supplying and fixing stepped type electronic fan regulator on the existing switch box including connections complete all as specified and directed.

Dismantling of ceiling fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of body & blade surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same complete all as specified and directed.

Taking down unserviceable sheet metal MCB/DB Box of 6 way & 8 DB switch etc. with connected items for necessary repair/replacement complete all as specified and directed.

S&F in replacement 125 A, 36KA rating and breaking capacity and four pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections complete all as specified and directed.

S&F 6 way Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. complete all as specified and directed. (But without MCB/RCCB/Isolator)

Supplying and fixing 8 way Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. complete all as specified and directed. (But without MCB/RCCB/Isolator)

S&F 6A to 20A rating, SP 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. complete all as specified and directed.

Supplying and fixing 32A , 240 10 KA, "C" curve SPN, miniature circuit breaker suitable for inductive load of Single pole and Neutral in the existing MCB DB complete with connections, testing and commissioning etc. complete all as specified and directed.

Supplying and embedding 40 mm dia G.I. pipe (medium class) in pole collar/ foundation /PCC /Hard standing/drain line cutting for cable entry including bending the pipe to the required shape complete with making good disturbed surfaces to match the existing complete all as specified and directed.

S&F Building security light fitting of Capacity 45 W having lumen efficacy not less than 110 lm/w New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening separate driver compartment with IP65 protection and impact resistance of IK08 including taking down old light complete all as specified and directed.

M&L for bracket for security light fitting made out of 40mm light grade GI pipe bended one portion of 45cm at 120° to shape of approx. length 1.5 mtr including 2 no MS clamp of flat iron size 40×6 mm complete with nut bolt washer complete all as specified and directed.

M&L for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with galvanised strip of size 25 x 5mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc. all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on complete all as specified and directed.

Supply and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. complete all as specified and directed.

S&F in replacement Highly robust industrial Box type LED extruded Batten type indoor decorative type luminaire suitable for LED Tube 1 x 20 watt (4ft ) complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

S&F in replacement LED Polycarbonate T8 Tube with in built driver in pc housing double sided connection of capacity 1x 20 watts complete all as specified and directed.

S&F in replacement LED lamp 15 W with minimum 500 lumen output, Suitable to B22 holder complete all as specified and directed

S&F in replacement new generation energy saving LED bulk head fitting, 10 W made up of aluminium housing with diffuser complete all as specified and directed.

Supply laying connecting and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm, 2 core, including taking down of old cable complete all as specified and directed.

M&L for 20 mm dia nominal bore G.I. pipes medium grade complete with G.I. fittings including trenching and refilling etc. including taking down old pipe & fitting complete all as specified and directed.

M&L for 25 mm dia nominal bore G.I. pipes medium grade complete with G.I. fittings including trenching and refilling etc. including taking down old pipe & fitting complete all as specified and directed.

S&F in repair 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed.

Excavation in trenches in any type soil n.exc 1.5m wide and n.exc 1.5m in depth and getting out for cable laying complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated soil n.exc. 50m and depositing where directed at level n.exc. 1.5 above the starting point complete all as specified and directed.

M&L for sand cushioning in layers 8cm before cable laying and 15 cm after cable laying and to be compressed for final thickness as 18cm complete all as specified and directed.

M&L for old size brick sub class "B" straight or curved on plain exceeding 6m means radius for laid dry to protect the cable complete all as specified and directed.

RANA ENTERPRISES

jlenterprise

bholanath bera

KRISHNA ENTERPRISES

MS SUBHAM ENGINEERING AND CO