Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | L1 | Accepted-AOC Accepted | |
| 2 | L2₹20.1 L+₹18,297.50 (0.92%)Rejected-AOC 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | L2 | Rejected-AOC Rejected | |
| 3 | L3₹20.7 L+₹78,107.50 (3.93%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹21.7 L+₹1.8 L (8.87%)Rejected-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹22.8 L+₹2.9 L (14.4%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹24.0 L
EMD Value
₹48,020
Closing Date
8 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
SPL REPAIR TO BLDG NO TP-16/1 TO TP-16/2, TP-17/1 TO TP-17/2, TP-18/1 TO TP-18/2 IN ZONE 14 OF 69 MED REGT AT TALBEHAT MIL STN
2022_MES_557204_1
CWE/JHA/TBT/TOKEN/35 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
TALBEHAT
As per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) TALBEHAT
₹48,020
Yes
7 Dec 2022
12 Oct 2022
16 Nov 2022
12 Oct 2022
8 Nov 2022
26 Oct 2022
60 days
Amount
Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10mm thick on in CM 1:6 fair faces of brick work or concrete surfacesfair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for 15mm thick external plastering in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.
Dubbing out average 15mm thick in CM 1:4 on irregular faces of walls or concrete chajjas (at any hight of building) etc including necessary scaffolding complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of white wash complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.
M&L for complete removal of existing treatment of old wall and applying two coats of oil bound distemper complete all as specified and directed.
M & L complete removal of existing treatment of old wall and providing two coat of cement base paint complete all as specified and directed.
M & L preparation old decorated surfaces of walls and providing one coat of cement base paint complete all as specified and directed.
Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.
Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered complete all as specified and directed.
M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and like other wk including necessary form work complete all as specified and directed.
M&L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each complete all as specified and directed.
M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand confirming to Fe-290(Gde E 165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.
S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Two panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.
S & F for 2nd class HW 35 mm thick, gauged and skeleton shutters (Three Panels), factory made open rebated and prepare to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 2009 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.
S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directed.
M&L powder coated aluminium window shutter sliding type section not less than 0.55 Kg/RM, three shutter two glazed and one gauged including joining cleat,glazing cleap,rubber packing aluminium snap beading,screws,locking arrangement complete all as specified and as directed. (Measurement shall be done leaf basis) Note:- Glass and Wiremesh paid Seprately.
S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified specified and directed. Note:- Glass and Wiremesh paid Seprately.
S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
M&L for Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors,ladders; framed balusters; walkways,railings, framework of water tanks,cooler stand and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.
S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.
S&F 125mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
S&F 100mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
S&F in repair 125mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.
S & F in repair aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.
S & F 125mm double action spring hinges,mild steel with steel wire spring, stove enamelled black, complete all as specified and directed.
S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.
M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enamelled complete all as specified and as directed.
M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old painted steel surface of any description and applying one coat of synthetic enamelled paint complete all as specified and as directed.
S&F in position 4.8 to 5mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen n. exc 0.5 sqm in each pane all as specified and directed.
S&F in position 4.8 mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen exc 0.5 sqm in each pane all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repair Stainless steel curtain rods powder coated fixed to bracket complete all as specified and directed.
S&F Stainless steel knobs with bracket fixing at end of pelmet rod complete all as specified and directed.
Dismantling of ceiling board/lathing any thickness including frame work complete all as specified and directed.
Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction.
Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and directed.
Dismantling of timber fillets , rails, posts, rafters, purlin etc under 40 sqcm in section, in any position in unframed work complete all as specified and as directed.
S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates confirming to Fe 410W(Gde E-250 quality A)complete all as specified and directed.
Dismantling Asbestos Cement (corrugated,semi corrugated, etc) sheets in roof covering complete all as specified & directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick,Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.
Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.
M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.
All as the item No 60 but as in skirting but tile laid over 10mm thick CM (1:4) complete all as specified and directed.
M&L for coloured Glazed ceramic tiles 450 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick complete all as specified and directed.
Demolition of Reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc complete all as specified and directed.
M&L for form work fair finished to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide complete all as specified and directed.
S&F steel reinforcement of TMT Bars of size 8mm dia and over cut to length bent to shape as required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc .complete all as specified and directed.
M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.
Moulding as In edge of granite platform complete all as specified & directed.
Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and directed
S& F rotational moulded synthetic (HDPE) water storage tank 500litre capacity (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spd & directed.
S&F in repairs ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified and directed.
S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
All as per Ser item No 74 above but 20 mm bore complete all as specified and directed.
S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.
All as per Ser item No 76 but 20 mm bore complete all as specified and directed.
M & L for refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed.
All as per Ser item No 78 but 20 mm bore complete all as specified and directed.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets,Waste coupling 32mm of PTMT (half or full threaded) (Minimum weight 32mm 45gms),waste pipe complete all as specified and directed
S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.
S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.
S&F in repairs PVC waste pipe 32mm bore 600mm long with one end socketed complete all as specified and directed.
S&F in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe 15mm bore iron pipe complete all as specified and directed.
S&F PVC floor trap with grating 75mm dia fixed with cement joint complete all as specified and directed.
S&F in repairs grating square 125mm size of PTMT with centre hole movable or side hole for fix to waste pipe complete all as specified and directed.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.
S&F in repair tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.
S&F in repairs Fancy type chromium plated stop valve 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.
S&F in repairs Chromium plated concealed stop cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as spd & directed.
S&F in repair brass chromium plated shower rose of 125mm size with swivel joints, incl Fixing to steel pipe or union of 15mm bore complete all as specified and directed.
S&F steel made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and directed.
S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
Taking down copper/aluminum point wiring (light, fan, socket or power) complete including fitting and fixture such as swithces, ceiling roses, pendants, regulators, sockets, light fittings etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed for wall, floors etc complete all as specified and directed.
Taking down distribution boards along with MCB's incl removing the same from site and making good distrubed for wall, floors etc complete all as specified and directed. Note:- All taken down MCB's should be deposited to MES store by the contractor without any extra charge
M/L for point wiring concealed type with 1.5 Sqm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor drawn through in and incl FRLS PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box incl 3mm thick ISI marked laminated sheet cover for fixing switches/socket/regulators etc for the following. Note: On RCC ceiling/column, false ceiling, AC/mettalic sheet ceiling wiring done on surface with conduit/PVC casing caping and its accessories.
One light/fan/bell point controlled by one No. piano type switch 5 Amps single pole one way complete all as specified and directed.
One socket outlet 5/3 pin 6 Amps controlled by one switch on the same board complete all as specified and directed.
One socket outlet 5/3 pin 6 Amps controlled by one switch on independant board complete all as specified and directed.
All as per Ser item No. 103 above but 3 pin socket outlet 15/16 Amps on the independent board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sqmm for phase & neutral & 2.5 sqmm for earth continuity conductor complete all as specified and directed.
S&F switch piano flush button single pole one way 5/6 Amps complete all as specified and directed.
S&F switch piano flush button single pole one way 15/16 Amps complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp and 15/16 Amps, 240 volts complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 20 mm, 100 watt three terminals complete all as specified and directed.
S&F step type electronic fan regulator fllush type on the existing phenolic laminated sheet complete all as specified and directed.
S&F Lamp holder/batten holder PVC / polycarbonate insulated body with metal ring and back plate for batten fittings complete all as specified and directed.
S&F bell ding dong type, AC 230 volts, single pole complete all as specified and directed.
S&F bell Push, flush type, 5 Amps, AC 230 volts, single pole complete all as specified and directed.
S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door (mettalic) type complete all as specified and directed.
S&F MCB, SP 5 to 32 Amps, 240 volts, 'C' series, 10 KA, 50 HZ, including connection in the B and testing/commissioning complete all as specified and directed.
S&F MCB, SPN 40 Amps, 240 volts, 'C' series, 10 KA, 50 HZ complete all as specified and directed.
Supply and fixing LED lights fitting 1 x 18W, 4 feet, 220V, AC decorative box type with driver, holder including LED light connecting up with three core fiexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED Lamp 9W B22 Type all as specified and directed
Supply and laying or fixing or passing through pipe in replacement, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC type and overall PVC sheathed in service connection suspended by insulating hangers not more than 1.00 meter apart including 4mm dia suspension wire one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed.
S&F house service bracket hook type complete with 3.00 Mtr Long GI Pipe 40mm dia medium grade, 02 Numbers 90 degree bends MS hook and stay or guy complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm thick buried directly in ground(earth pit not less than 2.25 meter deep below ground level) with top edge of earth plate not less than 1.5 meter below normal ground level, connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as soon in electrical plate no 3 of SSR pt 1 including necessary excabation and earth work, PCC(1:3:6) type C-1 with 50mm thick pre cast RCC (1:2:4) type B-1 cover slab framed with 50x30x4 mm MS angle (reinforced with 6mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing characoal or clke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20mm bore galvanized iron watering pipe (medium grade) wire mesh; copper lugs, complete in all respect. GI earh wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar, (test point) made of MS flat (400x32x6mm) bend in 'D' shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height 4 sqmm PVC insulated (Colour green) copper conductor single run as earh continuty conductor along with 15 mm PVC conduit grouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed. Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed.
M/S SHIVA TRADERS
M/s Indu Enterprises
M/S A.R BUILDERS
DEVENDRA ENTERPRISES
M/S PRAKASH RAIKWAR TRADERS AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .