WELCOME MAINTENANCE FOR OFFRs AND OTHER SERVICES TO JCOs/ORs MD ACCN IN ZONE A AREA UNDER AGE B/R-I UNDER GE (CENTRAL) KHADKI

Amount

NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6), finished even and smooth without using extra cement on internal walls, complete all as specified and as directed.

Material and labour for rendering 20 mm thick in two layers on stone masonry surfaces in CM (1:4), finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5 mm thick on concrete surfaces as in ceiling in CM (1:3), finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 2 mm thick wall care putty on walls/ceiling complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed.

Material and labour for preparation of old plasterd or unplastered surfaces of ceilings and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound emulsion distemper of approved tint ,including priming plastered and other surfaces with alkali resistant primer complete all as specified and directed

Material and labour for preparation of newly plastered surfaces of ceilings and applying two coats of oil bound emulsion distemper of approved tint , including priming plastered and other surfaces with alkali resistant primer complete all as specified and directed

Material and labour for preparation of old plastered surfaces of walls and applying two coats of oil bound emulsion distemper of approverd tint, complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of ceilings and applying two coats of oil bound emulsion distemper of approverd tint, complete all as specified and as directed.

Material and labour for one coat of synthetic enamal paint of approverd tint over wooden surfaces including preparation of old surfaces over 10 cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamal paint of approverd tint over wooden surfaces including preparation of old surfaces over 10 cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamal paint of approverd tint over coat of primer over wooden surfaces including preparation of New surfaces over 10 cm width or girth complete all as specified and as directed.

Material and labour for one coat of synthetic enamal paint of approverd tint on steel surfaces including prepration of old surfaces of any description, over 10cm in width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamal paint of approverd tint on steel surfaces including prepration of old surface of any description, over 10cm in width or girth complete all as specified and as directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing / taking down unsound treatment / surface, Material and labour for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instructions complete and as directed, the PU foam shall have 100% solids and solvent free, and shall expand 30-40 times of its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and directed. MAKE :- PIDILITE or equivalent.

Material and labour for fixing the metallic packer for hydrophobic PU foam and sealer for Sl Item No. 19 above as per manufacturers specifications including making suitable holes, complete all as specified and directed. MAKE :- PIDILITE or equivalent.

Material and labour for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with white/matching colour epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, and as per the sample approved at site complete all as directed by Engr-in-Charge.

Material and labour for 25mm thick plain cement concrete (1:2:4), type B0, using 12.5 mm graded stone aggregate as in leveling course of floor including demolition of existing PCC floor, complete all as specified and as directed.

Material and labour for non skid ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, as in floors etc. set in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:6) including dismantling existing floor tiles of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for vitrified tiles 600x600/600x1200 mm and 7 to 8 mm thick, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6), including dismantling existing floor tiles of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for vitrified tiles 600x600/600x1200 mm and 7 to 8 mm thick, as in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in cement mortar (1:4), including dismantling existing tiles of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6), including dismantling existing floor tiles of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4), including dismantling existing tiles of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for glazed ceramic tiles as in vertical surface 300 x 600 x 7mm / 300x450x7mm thick or equivalent set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:4) and dismantling existing tiles of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for 15-20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like fixed over and including 10 mm thick backing coat in CM(1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling existing stone slabs of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement screed base in CM(1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding to edge including dismantling existing floor of any type complete all as specified and as directed by Engr-in-Charge

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc. and making good the wall for fixing new window, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium louvered ventilators of section size 80mm x 20mm x 1.50mm including 5mm thick frosted glass fixed in half portion and adjustable type louvers in another half and stainless steel wire mesh fixed type on out side frame etc., and making good the jambs and wall for fixing new ventilator complete all as specified and as directed by Engineer-in-Charge.

Material and labour for aluminium framed work such as grills, gratings, etc..as in window / ventilators, complete all as specified and as directed by Engr-in-Charge

Supply and fix in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, all as per Prayag Cat No. 1239DM or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Taking down chowkats or frames with shutter without taking off shutters from frame of door/window of any description area n.exc 1.50 sqm sqm each and removing from the site complete all as specified and as directed by Engr-in-charge.

Taking down chowkats or frames with shutter without taking off shutters from frame of any description area exc 1.50 sqm but n.exc 4.00 sqm each and removing from the site complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description area exc. 1 sqm but n exc 2 sq. m each complete all as specified and as directed by Engr-in-charge.

Supply and fix factory made internal PVC door frame of size 50x47mm single rebated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed.

Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specifed and as directed.

Supply and fix 35mm thick second class hard wood plain framed panelled factory made door shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 30mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of shutters as specified in SSR-I, Section 8.24(a) supplied and fitted to chawkats complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium anodised barrel tower bolt 200mm long of extruded section with steel screws complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 150mm fixed with screws or welded complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100mm size stainless steel medium weight butt hinges for door shutters and frames fixed with bright screwes complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100mm size stainless steel light weight butt hinges for PVC door shutters and frames fixed with bright screwes complete all as specified and as directed by Engineer-in-Charge.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in aluminium window/ wire mesh door / steel window complete all as specified and as directed.

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, over all length of cover plate 150mm size complete all as specified and as directed.

Supply and fix in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and as directed.

Supply and fix galvanised tubing 15mm bore medium grade, galvanised, ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and directed.

Supply and fix galvanised tubing 20mm bore medium grade, galvanised, ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and directed.

Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Cleaning of serviceable PVC water tanks capacity exc. 250ltrs and n.exc 500ltrs, removing all scales and dirt etc from tank and from mouth of circulating pipes etc complete all as specified and as directed.

Cleaning of serviceable PVC water tanks capacity exc. 500 ltrs and n.exc 1000 ltrs, removing all scales and dirt etc., from tank and from mouth of circulating pipes etc complete all as specified and as directed.

Supply and fix in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore dia of pipe complete all as specified and as directed.

Supply and fix in repairs cast iron floor trap / nahani trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joints, dia of outlet 100 mm, complete all as specified and as directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap 110/110mm bore dia, 110mm PVC (SWR) WC connector with lip ring and connection to flushing pipe anti syphonage pipe, complete including making good to floor fixed in repairs complete all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white, including fixing bolts, and flush pipe fixed complete all as specified and as directed.

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed complete all as specified and as directed.

Supply and fix in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings all as specified and as directed.

Supply and fix in repairs swan neck pillar taps chromium plated, cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm dia complete all as specified and as directed.

Supply and fix in repairs bib taps long body, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore complete all as specified and as directed.

Supply and fix in repairs wall mixer 3 in 1, brass chromium plated, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs brass chromium plated shower rose 150mm size with swivel joint including fixing to steel pipe 15mm dia fixed in repairs complete all as specified and as directed.

Supply and fix in repairs angle stop cock, chromium plated brass, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia fixed in repairs complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, D type, 500mm long between flanges complete all as specified and as directed.

Supply and fix in repairs health faucet with 1 meter SS braided connection pipe fixed in repairs complete all as specified and as directed.

Supply and fix in repair Soap dish, brass chromium plated,all as per Cat Part No BA-45 of Prayag or equivalent makes specified in PS fixed to wall as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long in repairs complete all as specified and as directed.

Material and labour for repairs in PVC connection 450mm long with 2 nos brass check CP nuts as suitable complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm 'thickness (below or above ground level) complete all as specified and directed.

Material and labour for 75 mm thick plain cement concrete, (1:3:6), type C2 using 40mm graded stone aggregate as in plinth protection and paths laid in alternate bays and surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Supply and fix rotational moulded three layered polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, white, hoisted and fixed in position complete all as specified in SSR part I, capacity of tank 500 ltrs including 20 mm dia brass float valve and polyethylene ball including taking down existing unserviceable overhead tank of any description complete all as specified and as directed.

Supply and fix rotational moulded three layered polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, white, hoisted and fixed in position complete all as specified in SSR part I, capacity of tank 1000 ltrs including 20 mm dia brass float valve and polyethylene ball including taking down existing unserviceable overhead tank of any description.complete all as specified and as directed.

Supply and fix for ready made pully operated clothes drying system incl of four aluminium pipes of 2.7 RM long each (4 pipe set), outer dia 22 mm and inner dia19.8 mm chanel assemble, locking system ropes and all fixing materials alongwith L angle complete all as specified and as directed

Material and labour for preparation of old plastered surfaces of wall/ceilings and applying two coats of white wash complete all as specified and as directed.

S P DEVELOPERS (BID ID -3086390)

M/S K.D.MATE (BID ID -3074187)

S M MISHRA (BID ID -3074813)

MAHESH DADAJI BACHHAV (BID ID -3071333)

V.R.PRAJAPATI AND CO. (BID ID -3085944)

DARSHAN ENTERPRISES (BID ID -3085330)

greenstone construction (BID ID -3069796)

S.R.M.K Enterprises (BID ID -3074779)