Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹28.9 L+₹26,282.75 (0.92%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹30.1 L+₹1.5 L (5.19%)Rejected-Finance KAPASS MILL KALONI BAZPUR ROAD KASHIPUR GUDIYA DEPTT WALI GALI UDHAM SINGH NAGAR UTTARAKHAND 244713 | UDAM SINGH NAGAR | UTTARAKHAND | 244713 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹31.3 L+₹2.7 L (9.44%)Rejected-Finance 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹33.1 L+₹4.4 L (15.4%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
2 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari PIN 180003
SPL REPAIR TO BLDG NO P 5/12 AND P 5/13 OF FD REGT AT MIL STN JAMMU
2024_MES_645186_1
GEJM-94/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE Satwari
Class D Cat a(i)
9 documents required · 9 mandatory
₹500
Yes
GE Satwari
₹64,000
Yes
10 Sept 2024
5 Mar 2024
4 Apr 2024
6 Mar 2024
2 Apr 2024
20 Mar 2024
6 Mar 2024 - 20 Mar 2024
Amount
Demolition of cement concrete (unreinforced) ground floor to 2nd floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified Make Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Make Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Material and labour Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4. Make Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Description all as item above but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.
M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified.
Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 2nd storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.
M&L Rendering cement plaster, 15 mm thick on fair faces of brick/concrete surfaces of wall in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:4 all as specifid and directed by Engr-in-charge.
M&L Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc.
Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets
Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Chage. Make: Gyproc,Lafarg Boral Gypsum India,India Gypsum, Armstrong
Dismantling of AC or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering.
Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ( AZ-150 Micron) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.
S&F in repair second class hard wood timber (framed) scantling fixed , wrought, complete all as specified and as directed.
M&L Framed mild steel rolled work as in tank staging, Gates,Guard bar ,Rafter, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections) including distance pieces, cleats, gusset plates, etc, conforming to grade Fe 290 complete all as specified.
M&L Mild steel screw bolt (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long complete all as specified.
S&F in repair under counter basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent in Jaquar/ Hindware.
M&L for 75mm thick cement concrete 1:3:6, type C1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement complete all as specified and directed.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.
M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete.Make:Jindal,Hindalco,Indal
Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified.
Supply and fixing 5.00 mm thick glass sheet ordinary quality Tinted ( approved by Engr-in-Charge/ GE) and glazed in squares, exceeding 0.5 Sqm in each pane.Make:Saint Goblin
Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.
Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 1000 litres capacity, (cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified. Make : Vectus Safe, Sintex Pure,Sheetal suraksha Plus .
M&L Rolled/Square/round pipe sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) main and cross beams, vertical post, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality-A complete all as specified.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
Demolition of reinforced cement concrete of any discription ground to 2nd floors and removing the rubbish from the work site out side defence premises complete all as specified.
M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed.
S&F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.
S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F Aluminium handles, fabricated type, anodised Size-100mm, anodised section and fixed complete all as specified. (ISI Marked)
S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge
Ditto as item no 45 above But Except Brick.
S&F 4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto second storey with necessary scaffolding), all as specified.
Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)
S&F in repair Stop valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)
S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified.
S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make:- Jainko,Essco,Parko, Prayag
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. Make:- Jainko,Essco,Parko, Prayag
S&F in repair Chromium plated, towel ring , complete all as specified. Make:- Jainko,Essco,Parko, Prayag
S&F in repair stainless steel Shop dish holder complete all as specified. Make:- Jainko,Essco,Parko, Prayag
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long Complete all as specified.Make:- Jainko,Essco,Parko, Prayag
S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge.Make:- Jainko,Essco,Parko, Prayag
S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.
S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge.Make- Cera/Hindware
Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. Make:- Cera, Cat Part No- S1053101 or equivalent in Jaquar/ Hindware.
Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make: Jainko, Essco, Parko
Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed
Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed
Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge
Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement. Make:- Jainko, Essco, Parko.
Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make:- Astral, Supreme, Finolex.
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. Make:- Astral, Supreme, Finolex.
Supply and fixing UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make:- Astral, Supreme, Finolex.
Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge. Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge. Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and directed. Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed. Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed by Engineer-in-charge Make:- Astral, Supreme, Finolex.
Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge Make:- Astral, Supreme, Finolex.
S&F UPVC (SWR) , reducers 110 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.
S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.
Supply and fixing in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.
Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over one coat of wall care putty of 3 mm thick and one coat of primer complete all as specified.
M & L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.
M & L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.
M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with dustfree sand paper mechanised scrapper as per paint manufacturer specifications and applying two coats of premium oil emulsion distemper over 1 to 2 mm thick wall care putty complete all as directed by Engineer-In-Charge.
Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.
Taking down of unsv MCB DB SPN /TPN along with MCB's
Taking down of unsv Sub main wiring of any type and size
M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed medium duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One Light / Fan/ Exhaust Fan point controlled by one, one way switch 6 Amp complete
(b) One 3 pin socket outlet 6 amp independent
(c) One 3 pin socket outlet 6 amp same board
All as per srl item No 94 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.
Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.
Supply and fix modular type socket 3 pin, 6 Amps 2 module complete all as specified and directed.
Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.
Supply and fix modular type socket 3 pin, 6 A/16 Amps 2 module complete all as specified and directed.
Supply and fix modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.
Supply and fix ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.
Supply and fix LED light fitting 1 x 18Watt, 220V, batten integrated LED channel fitting integral sleek extruded polycarbonate LED chanel with aryclic cover, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage.
Supply and fixing of Recess mounting 2 x 2 LED luminarie, 36 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 600x600 mm modular ceiling grid and also can be suspended with provided kit, complete fitting with all fixing arrangement all as specified and directed by Engr-in-Charge. Make- Crompton /Bajaj /WIPRO.
Supply and fix of lamp holder,PVC /Polycarbonate type with back plate for batten fitting .
Supply and fix LED lamp suitable for B22 holder of capacity 10 Watt.
Supply and fix energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells or equivalant in Crompton/ Philips/ Wipro
Supply and fix Distribution Board (SPN) double door 12 Way and should be IP 43 protected with Copper Bus bar 100 Amp rated ,Earth Bar ,neutral Bar Door Earthing.
Supply and fix MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.
Supply and fix MCB Single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed
Taking down and refixing of Ceiling fan / Exhaust Fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer, all as specified and directed by Engr-in-charge.
Supply and fix of exhaust fan, steel body AC single phase. 230 V of size 300 mm sweep with, blades, and frame and louvers and including making of holes in wall, floor etc all as directed by Engr in charge.
M & L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.
Supply and fix Vertical Distribution Board (VTP&N) 4 way double door suitable for MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. Makes: Legrand/IndoAsian Optipro/Schnider Note:- (i) MCCBs FP & SP shall be measured paid separately (ii) MCB & DB shall have the same make.
Supply and fix 4 Pole MCCB 100 Amp, 415 Volts with rupturing capacity 16 KA , complete all as specified and directed
M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for the following. Note : (i) Two runs of copper conducter and one runs of earth copper conducter shall be measured as one length (a) 2x6 sq mm and 1x6 sq mm as earth wire .
Supply, laying for replacement of unserviciable underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 4 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes:-
Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m in depth and getting out in Soft and loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm
Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifieds and directed.
Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed.
Supply & laying dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specifieds and directed.
Material and labour for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specifieds and directed.
M/S A TO Z ENGINEERS
M/S Raman Construction Co.
NARESH KUMAR AND COMPANY
BALVINDER SINGH AND SONS
STAR CONSTRUCTIONS
M/S ANIL MAHAJAN
J P TECHNO
Kanwal Nain Behl
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .