PERIODICAL SERVICES AND REPAIRS TO SEEPAGE/ LEAKAGE OF CERTAIN MD AND OTM ACCN FOR MIL STN NOWGONG UNDER AGE B/R-I AT GE JHANSI

Amount

M&L for preparation of old surface and applying one coat of white wash (lime) on walls including cornices plastered or un-plastered surfaces complete all as specified and directed .

All as per item No 01 above but on ceiling.

M&L for preparation of existing plastered surfaces by bruss , sand paper, surface repair if required, filling putty in holes etc on wall surface and applying one coat of oil bound distemper white or any tinted over a coat of primer, complete all as specified and directed.

All as specified in item No 03 above but applying two coat of oil bound distemper of white or any tinted on walls.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a layer of (JK/Birla) wall care putty to get smooth and level finish, complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying a coat of cement base paint on walls, facia , cornice, chajja complete all as specified and directed.

M&L for preparation of existing surface of wall and applying two coats of cement base paint over a coat of cement base primer.

M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand preparing / rubbing and finally washing with watering and applying a coats of exterior emulsion acyrlic weather proof antifungal paint over a coat of cement base primer.

M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on other than fair fair faces of brick work or concrete surfaces with integral waterproofing compound @ 3% by weight of cement to be finished even and smoth without using extre cement.

M&L for 15 mm thick rendering in CM (1:6) on fair fair faces of brick work finished even and fair complete all as specified and directed.

M&L for preperation of new plastered surface and applying two coat of cement base paint on newly plastered surfaces of wall, complete all as directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

Taking down/removing existing roof treatment over roof slab incl roughening and wire brushing the surface to remove the loose concrete, dust and cleaning the surface all as specified & directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal phase of grooves with cement mortal 1:3.

M&L for rendering 10mm thick on top of roof in CM 1:4 incl mixed with WPC (Water proofing compound shall be paid separately).

Prepration of existing surface and m&l of water proofing treatment to roof slab with APP based modified polymeric membrane having thickness 3 mm and weight not less than 3 Kg/Sqm reinforced with polyster non wove fabric ( wt not less then 150 gms) with 100 mm overlap laid as per manufacturer’s instructions,laid on primer surface with bituminous primer 0.4kg /sqm apply with torch application Apply a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membran all edges to be taken up to vertical wall of 20 cm height and inserted into the vertical wall and conceiled the joint with bitumen sealent complete all as specified and directed by Engineer-in-Charge.

Shri Tirupati Associates