Annamalainagar TP, Cuddalore Dt - MLA Work - 2025-26

Earth work excacation in all soils including initial lead and lift charges as per standard specification.

Collection supply and filling of Stone Dust of approved quarry including cost and Conveyance of all materials to site and all labor charges for filling etc., Complete.

Plain Cement Concrete 1:4:8 using 40mm ISS size HBG metal form approved quarry including cost and conveyance of all materials to worksite, including labour for mixing, laying the concrete with good water and compacting the concrete including charges for form work and all other incidental charges etc., complete as per Specifications MORD 800.

Centering for sofits of RCC slabs of Plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and B.G. 10 stiffened with M.S. angles of size 25mm x 25mm x 3mm laid over silver Oak (CW) joists of size 10cmx 6.5cm (spaced at about 90cm c/c) complying with standard specification.

Column upto Roof level

Lintel beam, Roof slab etc.,

for lintel bottom

Supplying, cutting, bending, tying and fixing in position of M.S (or) RTS Grills for RCC works including cost of steel and blinding wire etc., complete.

Providing and laying in position, Standardised Concrete Mix M-20(1:1/2:3) Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

for basement

for super structure

Brick work in cement mortar 1:5 mix using country bricks of std size 8¾”x 4½”x 2¼” (one part of cement five part of sand etc complete as per standard specification for foundation and basement.

for basement

for super structure

Weathering course with broken brick jelly of 20mm size mixing of slacked lime required ratio and required slope and as directed by the departmental officers, as per standard specification.

Finishing the top of roof with one course of machine pressed tiles and pointing with cm 1:3 pointing red oxide etc., complete as per standard specification

Supply and fixing Rolling shelter including all cost and conveyance etc., (complete.PWD SOR p.no.44)

Supplying and fixing of jolly including all cost and conveyance etc complete as per std specification.

Supplying and fixing of MS Door and Window including all cost and conveyance etc complete as per std specification.

Special celing Plastering in cement mortal 1:3 and 10mm thick including all cost and conveyance etc. as per standard specification.

Plastering in cement mortal 1:5 and 12mm thick including all cost and conveyance etc. as per standard specification.

Plastering with cement mortar 1:3 mix 20mm thick etc., complete as per standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats with ready mix enamal paint of approved colour and trade for doors & windows including cost and conveyance of all materials and all other labour charges etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A FT switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for lectronic regulator) (SD 19)

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point (SD 39)

Supply and fixing of 110mm PVC pipe including placing and leading etc.,