Repair and Renovation of Centralized facilities in the Department of Remote Sensing and GIS in connection with NAAC Accreditation of Jammu University

Amount

Removing dry/oil bound distemper or water proofing cement paint etc by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of 1.0 mm thick (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with Ist quality acrylic distemper (ready mixed) having VOC contents less than 50 gms/ltr, Two or more coats of required shade and colour, including applying one coat of water thinable cement primer of approved brand and manufacture.

Distempering (one coat) with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Painting with synthetic enamel of approved brand and manufacture of required colour to give an even shade (One or more coat) on wood /Steel Work (Asian/Nerolac)

Supply & fixing of following items including cost of nails/screws/fevicols etc. complete. Aluminium sheet

----------do------------- Door Steel (3'-0'')

----------do------------ 4 mm commercial ply (ISI)

Supply of Labour for different works Carpenter II Class

-----------do-------------- Mazdoor

Repair to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape, raking out joints and preparing & plastering the wall surface with cement mortar 1:4 (1 cement : 4 sand) including disposal of rubbish outside the University Campus.

Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 4.0 mm (weight not less than10kg/sqm)

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. Complete 250 x 10 mm

-----------do------------ 150 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete 125 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked anodised aluminium butt hinges with necessary screws including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Uprooting of rank vegetation/Plants grown on walls/roofs by way of dosmantling brick masonary/concrete, taking out of the roots including making good the wall/roof with brick masonry/cement concrete as required (Brick masonry/Cement concrete to be paid separately). All work upto floor V level.