SPECIAL REPAIR TO 21 UNITS OF STAFF QUARTERS OF KENDRIYA VIDYALAYA UNDER GE NARANGI

Amount

Demolition of cement concrete (unreinforced) n.exc. 15cm thick above or below ground level of any description including removal of spoils/ demolished materials not exceeding 100m and depositing complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4, type B0 with using 12.5mm graded stone aggregate as in wearing courses to receive floor tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles of size 300 mm x 200 mm x 6-7 mm thick on vertical surfaces set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over and including 10mm thick screed in CM 1:4 complete all as specified and directed.

Material and labour for non skid coloured tiles area of each tile exc 0.11 Sqm but n.exc 0.18sqm, 7mm thick as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item No 5 here in before but as in skirting/dado with and including over 10mm rendering in CM(1:4) complete all as specified as directed

Material and labour for non skid coloured tiles area of each tile exc 0.18sqm but n exc 0.38 sqm each 9 to 10mm thick as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per item No 07 here in before but as in skirting/dado with and including over 10mm rendering in CM(1:4) complete all as specified as directed

S&F Vitrified ceramic tiles10mm thick light shade area of each tile exc 0.36sqm but not exc 0.42 sqm in floors, set and jointed and pointed in white or coloured cement to match over 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

All as per item No 09 here in before but as in skirting/dado with and over and including 10mm rendering in CM(1:4) complete all as specified as directed

S&F 18 to 20mm thick marble slab makarana Dongari rubbed and polished on kitchen plastforms , window cills and like in CM 1:4 including pointing in white cement 1:2 using marbal dust with admixture of pigment to mach with marbal shede over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

S&F machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick cement screed bed in CM 1:4 complete all as specified and directed.

S&F Kota stone slab 18 to 20 mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm rendering in CM(1:4) complete all as specified as directed.

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed.

S&F in Repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float, 15mm dia and 600mm long PVC connections with PTMT nuts and handle including brackets etc complete all as specified and as directed.

S&F in Repair Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets including 32 mm PTMT waste coupling suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified & directed.

S&F Vitrious china white wash hand basin of size 380x300mm fixed to wall incl waste coupling and waste pipe complete incl removing old one and make good existig surface. Make : Somany cat No 110148 LEO or Equivalent of Cera/ Hindware complete all as specified and directed.

S&F in Repairs Stainless Steel Sink with drainage board made out of 1.00mm thick sheet with plug washers( including waste coupling brass chromium plated suitable for Sink, with long screwed shanks and fly nuts of size 40 mm, PVC waste pipe) MS angles centilever brackets of suitable size and connecting union to pipe of over all size 915x460mm and bowl size 410x330x160mm all as specified & directed. Make : Nirali/Prayag/Blue star

S&F in repairs 1 mm thick stainless steel plate rack of size 31”x24”x10” including fixing with rawal plug and screws incl waste coupling and pipe complete all as specified and directed. Make : Blue Star Cat No KPR-313 or equivalent of Nirali/Prayag

S&F in repairs Stop Valves 15mm fancy type Chromium plated with long shank and cup(concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed.

S&F in Repair Bib Taps 15 mm bore cast copper alloy fancy type Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in Repair swivel Shower with arm of CP fancy type for fixing with 15mm pipe Make : Hindware Cat No : F160025 or Equivalent of Cera/ Hindware/ Prayag complete all as specified and directed.

S&F in Repair Grating doom 125mm dia with waste hole of PTMT (Min weight 40 gms). complete all as specified and directed. Make : Prayag/Polytuf

S&F in Repairs Brass Chromium Plated Tubular Towel Rail of 20mm dia of 60cm in length, D shaped, with brass chromium plated brackets completed all as specified and directed.

S&F in Repairs Tubular Towel Ring Make Prayag Cat No BA-41 or equivalent, with brass chromium plated brackets all as specified and directed.including brackets complete all as specified and directed.

S&F glass shelf of size 450x150mm size with CP guard rail below mirror for keeping soap box etc Make : Prayag Cat No BEA-47 or equivalent, complete all as specified and directed.

S&F Corner Glass shelf fancy type 6mm thick 250x250mm/300X 300mm size and fixed over CP brass bracket Make : Prayag Cat No BEA-46 or equivalent,complete all as specified and directed.

Taking down cement plaster on brick or stone wall and roof in any description including removal of spoils/ demolished materials not exceeding 100m and depositing complete all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4(using water proofing compound as per manufacture instructions) and finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid sepertely

Supply only integral water proofing compound

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc, including cleaning and refixing or removal to store (meaasured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F75mm PVC (SWR) multi floor/nahani trap with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm bore complete all as specified and as directed.

Fixing only old GI tubing medium grade 15mm bore including new fittings laid in trenches or on walls complete including making good, complete all as specified and directed.

Fixing only old GI tubing medium grade 20 mm bore including new fittings laid in trenches or on walls complete including and making good, complete all as specified and directed.

S&F GI Tubing medium grade 15mm bore laid in trenches and as wall `complete including making good, cutting portion all as specified and directed.

S&F GI Tubing medium grade 20mm bore laid in trenches and as wall `complete including making good, cutting portion all as specified and directed.

Demolition of Reinforced cement concrete as in water tanks etc including removal of spoils/ demolished materials not exceeding 100m and depositing complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 1000 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and complete all as specified and directed.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed

M & L for complete removal of existing wall surface and applying two coats of oil bound distempera over a coat of primer over 1.50 mm thick (minimum) wall care putty complete all as specified and directed

Preparation Newly plastered surface and applying two coat of oil bound distemper over a coat of primer over 1.50 mm thick (minimum) wall care putty on walls all as specified and directed.

M&L for complete scrapping of existing treatment of wall, prepration of old surface of wall etc and applying two coat of exterior emulsion paint ( 1st quality) over a coat of exterior primer over 1.5 mm thick wall putty on walls all as specified and directed.

M&L for preparation of new plastered surface of wall etc and applying two coat of exterior emulsion paint (1st quality) over a coat of exterior primer over 1.5 mm thick wall putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of oil bound distemper incl filling the holes and cracks with white cement so that the surface will appear smooth finish complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of cement/alkali primer complete all as directed.

M & L for preparation of old plastered surface of wall and applying one coats of cement base paint complete all as directed.

M & L for preparation of old decorative plastered/unplastered concrete surface of wall and making free from oil, laitance, grease, wax, dirt or any other form of foreign matter which might affect adhesion filling large holes, cracks and other defect repaired by cement mortar and applying high performance acrylic polymer modified cementious damp-proof coating in 2 coats to achive 1 mm thickness (minimum) and manufacture instruction complete all as directed and specified. Note : The first coat should be allowed to dry for 4-6 hours before applying second coat. Make : Fosroc/Pidilite/Sika/Dr. Fixit

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & Grill without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters without taking off shutters from the frame) complete all as specified and directed.

S&F pressed steel frames of size 125x60mm made from 1.25 mm thick sheet for doors with one or more rabates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F pressed steel frames of size 105x60mm made from 1.25 mm thick sheet for doors with single rabate incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for filling of hollow steel frames of any size complete all as specified and directed.

S &F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wooden grain printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and directed.

S&F Factory Made Solid Panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded sections 150 mm size complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S & F 100 mm long Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L for anodized aluminium sliding glazed window shutter (double leaf glazed window shutter and single leaf mosquito proof shutter each in single frame work) without sash bar with anodized aluminium shutter of section 40 mmx20mmx1.10mm thick and window frame/ chowkat of section 92.00 mmx29.50 mmx1.20 mm thick including necessary jointing cleats, glazing clip, rubber packing, snap bending, screws, handle, tower bolts and locking arragement etc and encluding 4mm thick sheet glass, tinted quality on panel and stinless steel wirecloth for mosquito proofing, 0.36 mm nominal dia and avarage width of aperture 1.40 mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and directed.

S&F framed work such as grills , gratings,etc with ends of bars shouldered and /or riveted, or froged into spikes, framed guard bars, barred iron doors, ladders, and similar work conforming to Fe 290, Gde E165 complete all specified and as directed.

S&F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for two coat of synthetic enamel paint on steel surface over 10 cm with or girth incl preparation complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling of timber scantling for unframed work under 40 sqcm in section as in fillets,rails,posts,rafters,purlins etc

M & L for suspended false ceiling using E-grid (exposed ceiling suspension system) of grid size 600x600mm with main runner 38mmx24mm and wall angle 24mmx24mm using 4mm thick Non Asbestos fiber cement designer board (E-Board classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures air conditioning diffuser and ducts, sprinkler, smoke detectors etc. THe main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c, the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c so as to from 600x600mm grid and painted with two coats of OBD over a coat of primer before installing it on the grid all as specified and directed.

S&F 19mm thick prelaminated plywood interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to screws to timber frame work etc complete all as specified and directed.

S&F CP Health faucet brass CP for 15 mm bore pipe complete all as specified and as directed. Make : Hindware Cat No : F160013 or Equivalent of Cera/ Hindware/ Prayag

S&F in repair CP soap dish fixed to wall with brass chromium plated screws Make : Jaquar Cat No : CAN 1131 or Equivalent complete all as specified and directed.

S&F in repairs chromium plated toilet paper holder Make : Hindware Cat No : F880003 or Equivalent of Cera/ Hindware/ Prayag complete all as directed.

S&F in repairs 20 mm dia anodised aluminium chromium plated tubular curtains rod with fixing brackets, stops, rollers etc. complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any guage, thickness, including nanital or similar patternroof coverings complete all as directed.

Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based corrugated steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based plain steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in ridges fixed with self tapping screws complete all as specified and directed.

M & L for cleaning the top surfaces of concete surface, including flushing and junction of parapes etc and surfaces painting with a layeer of blown grade bitumen of industrial bitumen 85/25 at the rate of 1.20 kg per sqm complete all as specified and directed.

M & L " APP" based polymetric membrane minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm) land on pried surface by forced application complete all as specified and directed.

M & L Aluminium paint on APP based surfaces of any dscription, exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified.

M&L 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 stone aggregate) in plinth protection, finished even and smooth without using extra cement with and including all necessary formwork and to divide the area in panels and finishing exposed edges fair and rounding or chamfered with and including filling the joints with mastic filling, complete all as specified and as directed.

Surface excavation n.exc 30cm deep averaging 15.00cm deep and getting out in soft/loose soil complete all as specified and as directed.

100mm thick hard core with aggregate of size exc. 63mm but not exc. 100mm, deposite, spreed, levelled in layers n.exc 15cm rolled/rammed to true surface complete all as specified and as directed.

M&L 50 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base and sub floors complete all as specified and directed.

M & L pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 25 mm thick with white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Supply & Fixing in repairs gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 20mm bore complete all as specified and as directed.

Supply and Fixing of Mortice Lock Brass 4 lever 100mm including escutcheon plates and two keys complete all as specified and directed.

Dismentling structural steel work including door , gates but excluding framed truss etc complete.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed. Conforming to Fe 290 (E165)

S&F Mild steel pain, black sheet in wall cladding, steel gate etc 0.8mm thick complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:3 on fair faces of brick/ concrete surfaces finished even and smooth wihtout using extra cement with using WPC. WPC shall be measured and paid seperately.

M&L for pasting of 150 micron thick polythene film laid/ pasted over one coat of bitumen primer @ 0.30 to 0.50 kg per sqm over vertical/ floor surfaces of sunken portion complete all as specified and directed.

M&L for 40mm dia GI pipe medium grade as in sprout of sunken floor 450mm long each complete all as specified and directed.

M&L for PCC 1:5:10 type D2 using 40 mm graded stone aggregate as in sunken floor complete all as specified and directed.

M&L for Rendering 5mm thick cement plastering in cement mortar 1:3 as on ceiling, chhajjas & other concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S & F Sheet frosted/ pin headed glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads in squares n.exc 0.5 sqm in each pane including hacking out old broken glass from wooden frame complete all as specified & as directed.

M & L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces all as specified.

Demolition of cement concrete (Reinforced) as in roof, floors (other than ground floors), beams, staircase, landing, chajjas, shelves and other similar suspended works and removing debrish from side complete all as specified and directed.

Mild steel TMT bars 8 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips and complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (12.5mm graded agg) as in lintels upto 1.50m clear span, cills , steps, copings , bed blocks, band, shelves/ chajjas, manhole covers etc with slightly rounded or chamferred angles or edges ( precast or casted in situ) all specified and as directed incl use and waste of form work for rough finished surfaces of concrete complete all as specified and directed.

Formwork to sideds and soffits of floor beams,roof beam ,catilevers,shelves etc and rough finished surfaces of concrete flat complete all as specified and as directed.

Formwork to sto chullah hoods,chajjas,troughs and similar work and rough finished surfaces of concrete flat complete all as specified and as directed.

Dismantling of brick work built in cement mortar incl all quoins, arches, pillar etc and complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 and complete all as specified and directed.

All as per ser item above but except bricks i.e., using old serviceable bricks retrieved under item above complete as specified and as directed.

Excavating in trenches n.exc. 1.50m wide and n.exc. 1.50m in depth for foundation etc and getting out in soft/loose soil complete as specified and as directed.

Removing excavating surplus soil, n.exc. 50.0 m and depositing where directed at a level n.exc. 1.50m above the starting point complete as specified and as directed.

M & L PCC type C-2 1:3:6 using 40mm graded aggregate as in surface drain and channels complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M & L for 15 mm thk rendering on fair faces of brick work in CM 1:4 complete all as specified.

M&L for 2nd class hard wood plain fillets, square rectangular or triangular in section, wrought bullnozed , rounded or chamferred on one edge or face fixed with nails not exc 25 sqcm complete all as specified and directed.

S&F for Continous (piano) hings mild steel bright finish or elecrogalvanised fixed in repair Width of Flap 40 mm when open complete all as specified and directed.

S&F 50mm dia polished hard wood knobs fixed with screw complete all as specified and directed.

S & F ball catches with 8mm dia steel ball and brass body and stiking plate incluing letting and fixed.

S&F windows / ventilators for opening any area (ECO-4000 Series) fabricated from roll framed sections made of galvanished steel colour coated / powder coated (Base steel as per IS 513 "D" quality galvanished as per IS-277 with zinc coating of 120 gms/ Sqm with total coated thickness of 0.06 mm sections for frame should be of 72mm x 55mm, section for mullion should be of 72mm x 50mm, Section for shutter frame should be of 41mm x 20mm, section for fixed glas bead should be of 12mm x 12mm, and section for fly mesh should be of 40mm x 20mm section for frame glazed shutters and mesh shutters should be cut to length and miter joined with polypropylene corner brackets, mulrion section should be joined with frame / mullion using mullion cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass, spoon section should be used around fly mesh to fix mesh in mesh shutter and including each glazed shutter and mesh shutter should be provided with stainless steel pivot flinges - 1 set, Seccolor Handle & Seccolor stay window frame should be fixed to brick / concrete masonry by using Nyron self expanding caps and driving MS electriplated 80mm long screws into the caps through frame including Grill made of 10mm sqm bars welded to at 150mm centre-to-centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws and including with primer coat of Epoxy Primer of 5 - 7 microns thick finish painted with Polyester paint of 12-16 microns thick or powder coated with polyester upto 50 - 60 microns thick complete all as specified and directed. (Vendors / Manufacturer of these windows shall be procured from NCL type - 4000 Series, TATA Steel, Mumbai, Ashwani & sons, 4-66, Raj Nagar, Ghaziabad (UP), Jindal, 2-32 Gurgaon, Haryana - 122 001, Ashish Industries, 1337, Manapur Industrial Area, Meerut Road (UP), Pune - 201003, Ph-9891542779). Note: (1) Wire mesh and Glass will be paid under respective items of Sch. (2) Rest all as specified in drawing No CESZ/2018/TD/35 Sheet No 1/2, 2/2

Taking down carefully old unserviciable copper/aluminium point wiring (light, fan, socket or power point) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Taking down ceiling fan including connection wires carefully removal to store in safe custody and refixing the same in original position after servicing including ball bearing, bush etc ( if required) and painting with synthetic enamel paint by spraying incl fillint cavity complete all as directed by Eng-in-charge

M&L for point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLSH quality) drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories including suitable module PVC modular box or pressed steel modular boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint both internally and externally including cover plate with frame for concealed in walls/ceiling etc and including cutting chases for conduits and sinking for boxes and making good to disturbed surfaces, including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point/fan point/bell point controlled by one 5 Amps one way switch complete as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

All as per item No 132 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches.

All as per item No 132 above but one socket outlet 3/5 pin 6 Amp on independent board.

All as per item No 132 above but one one light point controlled by 2 Nos 2-way modular switches .

All as per item No 132 above but with 2.50 sqmm cable for 3/5 pin 15 Amps switch socket outlet with PVC unsheathed single core multi- stranded copper cable of size 2.50 sqmm green in colour as earth continuity conductor in independent board complete all as specified.

All as per item No 132 above but with 4.00 sqmm cable for 3/5 pin 15 Amps switch socket outlet (Power point) with PVC unsheathed single core multi- stranded copper cable of size 4.0 sqmm green in colour as earth continuity conductor in independent board complete all as specified.

S & F plug and socket DB with industriel socket suitable for 3P-1N+1E complete with and including MCB FP 63A Model DX3 and plug in socket 5 pin for 415 volts complete all as specified and directed.

Supply and fixing of modular switch one way 6 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket outlet 3/5 pin 6 Amps 230/250 volts 2 module complete all as specified/ directed.Make: Legrand/L&T/Schneider

Supply and fixing of modular switch one way 16 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket 6/16 Amps, 230/250 volts, 3/5 pin combined, 2 module complete all as specified and directed.Make: Legrand/L&T/Schneider

Supply and fixing of modular fan regulator 120 W ,6 amps 2 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular bell push switch one way 6 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular switch two way 6 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing ceiling rose, 3 terminal PVC/polycarbonate, isolated body complete all as specified and directed. Make : Anchor/SSK/Havells

S&F Modular lamp holder, insulated body, with back plate for batten fitting including LED 9W bulb complete. Make of holder- Havells/anchor/Legrand. Make of LED bulb: Havells/Bajaj/Surya/CG/ Philips

S&F decorative hexagonal bulk head LED luminarie with 10 Watt, 6000K with IP-66 protection including connection complete all as specified and directed. Make: Havells Model No HEXAFT10WLED857SSYMBOPC or its equivalent make and model Philips/CG/Jaguar

S&F batten for LED box type fitting pre-wired including LED tube 1 x 20W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable and fixed on 2 Nos of PVC block complete all as directed. Make: Jaguar Model LGLZ01X020XC/ LGLZ01X020XW/LGLZ01X020XN or Havells Cat No LUMILINEPLUSBS20WLED865SPCSS or its equivalent make and model Philips/CG/ Havells

S&F batten for LED box type fitting pre-wired including LED tube 1 x 10W connecting up with PVC insulated and sheathed 1100 volt grade flexible copper cable and fixed on 2 Nos of PVC block complete all as directed. Make: Jaguar Model LGLZ01X010XC/ LGLZ01X010XW/LGLZ01X010XN or Havells Cat No LUMILINEPLUSBS10WLED865SPCSS or its equivalent make and model Philips/CG/ Havells

S&F wall decorative fitting durable plastic body and designer mesh in gold finish suitable for 9W LED lamp of B-22 including lamp of 9Watt LED warm light with necessary connection complete all as directed and specified. Make: Havells Cat Part No LHFOECE11Z1B014 or equivalent make Jaguar/CG

Supply and fixing Distribution board SPN , 240 volts single pole and neutral ,double door, sheet steel enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted on wooden board with electrical connection complete all as specified and directed including taking down old one. Make: Havells Cat part No DHDPSHODRW08 or equivalent in Schnieder/GE/Legrand.

Supply and fix in repairs MCCB Distribution board, VTP&N , loadline , double door, ,sheet steel, enclosure powder coated with 250 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in wall with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDLVDRWGOFO04 or equivalent in Legrand/Schnieder/GE/C&S/Legrand.

Supply and fixing Distribution board TPN , 240 volts single pole and neutral ,double door, sheet steel enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted on wooden board with electrical connection complete all as specified and directed including taking down old one. Make: Havells /Schnieder/GE/Legrand.

Supply and fix MCCB four pole , 415 Volt,63 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed .Make:- Make:Legrand /Siemens / Schneider / L & T/ABB.

Supply and fix MCB, SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Legrand /Siemens / Schneider / L & T/ABB .

Supply and fix MCB TPN , 415 Volt, 63 Amps complete all as specified and directed .Make:- Make: Legrand /Siemens / Schneider / L & T/AB.

Supply and fix MCB SPN , 415 Volt, 40 to 63 Amps complete all as specified and directed .Make:- Make: Legrand /Siemens / Schneider / L & T/ABB.

Supply and fix MCB, SPN, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Legrand /Siemens / Schneider / L & T/ABB .

M & L for Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall/ceiling alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM

Supply, installing connecting and testing AC single phase static energy meter of Accuracy class 1.0, 240 V 50 Hz with backlite LCD display of rating 10 to 60 Amp (Measure and displays in kWh, V.1 kW. PF last month history of kWh & MD in kW) with special features like TOD. Tamper logging optical communication port & display in absence of power with transparent hinge type box including taking down old metre complete all as specified and directed. Make: L&T Cat Part No WM101BC7DDHBOX or its equivalent.

Supply, installing connecting and testing AC single phase static energy meter of Accuracy class 1.0, 240 V 50 Hz with backlite LCD display of rating 5 to 30 Amp (Measure and displays in kWh, V.1 kW. PF last month history of kWh & MD in kW) with special features like TOD. Tamper logging optical communication port & display in absence of power with transparent hinge type box including taking down old metre complete all as specified and directed. Make: L&T Cat Part No WM101BC5DDHBOX or its equivalent make HPL/Secure

S&F anticorrosive dust proof, rust proof, shock proof self extinguishing property resistance to heat, vermin & water proof, Ultra violet stabilised and prefer resitant to accommodate 4 Nos single phase meter made from Thermosetting Plastic i.e, Glass Reinforced Polyester sheet moulding compound (SMC) confirming to IS-13947 (1992) as per attached technical specification by the process of not compression moulding drawing and IS-14772:2000 of minimum size of box from inside shall be 700 x 480x 230mm including taking down burnt one and making good disturbed surfaces using necessary plaster work after removing of existing meter box all as specified and directed. Make: RMC or equivaleint make Hensel/ Sintex

Supply & Fix and testing in replacement of storage type water heater of capacity 25 litrs five star rated 230V, maximum power consumption - 2 KW, polymer protective coating technology for inner container and titanium enamelled heating element vertical wall mounting complete with smart bath logic function all accessories and pvc connector pipe 15mm bore 450mm long 2 Nos for hot and cold water supply complete all as specified and directed. Make: Usha Models - MISTY 25L or equivalent model of Crompton or Bajaj.Note : Old Geyser to be deposit MES store yeard without any extra cost.

Supply & Fix in replacement of Antidust exhaust fans, AC single phase 230V/240V of size 300mm sweep, 900 RPM with necessary fixing accessories, writing MES No with black synthetic enamel paint 2 cm high in letter complete with necessary connection up including provision of three core copper flexible cable with flexible wire cover of plastic white in colour and connection from ceiling rose to exhaust fan terminal etc all as specified and directed. Make: Usha Model - Aeroclean LD (Anti Dust) or equivalent model of Crompton/Orient.

Material and labour for Earthing complete with galvanized steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth lead wire of 4 mm dia upto 7.50m up to test point by means of nuts, bolts, check nuts and washers, GI pipe 15mm bore light grade for cable protection, excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 15mm bore GI pipe, light grade for protection of earth wire, MS angle iron frame 40x40x3mm, 40mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh, charcoal and common salt in alternate layer of 15cm complete etc all as shown in electrical Plate No. 03 of SSR Part-I (2009) and connected to earthing test point including testing on completion and taking down old one complete all as specified and as directed.

S&F anticorrosive dust proof, rust proof, shock proof self extinguishing property resistance to heat, vermin & water proof, Ultra violet stabilised and prefer resitant to accommodate 1 No single phase meter made from Thermosetting Plastic i.e, Glass Reinforced Polyester sheet moulding compound (SMC) confirming to IS-13947 (1992) as per attached technical specification by the process of not compression moulding drawing and IS-14772:2000 of minimum size of box from inside shall be 250 x 250 x 160 mm including taking down burnt one and making good disturbed surfaces using necessary plaster work after removing of existing meter box all as specified and directed. Make: RMC or equivaleint make Hensel/ Sintex

M&L LED building security luminarie 48 watts WSPD epoxy powder coated pressure die cast alumnium housing with weather proof gasket for LEDs and control gear compartments pressure die cast alumnium frame with heat resistant toughened clear glass fixed with SS screws LED specification CREE LED / Equivalent colour temp 5700 K +/- 300 K Lens IP-66 Lumen efficiency >100 im/w surge protection 4kv internal (Built in) with twin core conductor complete all as specified and directed including testing in completion. Make: Havells Cat Part No ENDURAPERANEOSL48WLED757SASYTOPC of equivalent of Philips / Wipro/CG. Note: Drive of LED street light should be same as make approved.

M&L for building security light bracket made out of 40mm bore medium grade GI pipe with two sets clamps with nuts and bolts, bend to shape for fixing building security light luminarie length of GI pipe shall not be less than 2.0 mtrs complete all as specified and directed

Supply and lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable ,1100 volts grade, XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc, of 16 Sqmm 4 core , confirming to IS specifications including taking down old one.

Returning, filling in trenches, spreading ,levelling, watering and well ramming in layers not exceeding 25cm thick.

Supply lay and spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply and lay in trenches fly ash bricks, old size sub class “B” for cable protection all as specified and as directed.

S&F GI tube 32mm bore light grade with all fittings fixed complete to wall/ceiling pole or laid in trenches on floor including cutting existing floor for protection of electric cable all as specified and directed

M/S KAMAKHYA CONSTRUCTION AND BUILDERS

M/s JK Jangid and Company

LAXMI CONSTRUCTION

M/S Narayan Chandra Das

M/S MANOJ PAUL

M/S UTTAM SAHA

M/S SEWAK SINGH

M/s KRISHNA CONSTRUCTIONS