Demarcation of ROW with pre-cast R.C.C. M20 posts with Barbed wire fencing 3m apart and dismantling & disposal of released materials of dismantled Structures falling in the alignment of DFCCIL ROW of Khurja-Dadri Section under CGM/Tundla unit.

"Supplying and fixing Pre-cast R.C.C.M20 Standard posts of size 100mmx 100mmx1800mm (for barbed wire fencing) 1.80m Long every 3m apart with struts provided as per approved sketch, boundary posts being embedded underground in 300mmx300mms 600mm 1 pit/hole with plain Cement concrete (1:2:4) in proper location as directed by Engineer-in-charge and Also, writing 'DFCCIL' letter on posts in Red/Black paint with white background at 30m interval as directed by Engineer-in-Charge. Cement and nominal Reinforcement bars for pre-cast RCC Posts are included in the rate. Moreover, Cement for doing in-situ concreting in Pit/hole & all transportation cost included in the rate."

Providing and fixing 1.2 high fencing With Pre-erected 1.80m R.C.C. post Placed every 3m apart, every 15th post or Nearer (If there is abrupt change of ground Slope), last but one 2 end post and corner Post shall be strutted on both sides and in End post one side only with struts Embedded in cement concrete blocks, provided with 5 horizontal lines and two Diagonals of G.I barbed wire of 2 strand Wires, 2.5mm thickness (12SWG) having 1 kg weight per 6m length approx for each Single wire, fixed with G.I staples on turn Buckles or G.I binding wire tied with 6mm Bar nibs fixed while casting the post (cost of posts, struts and concrete to paid separately)

Demarcation of DFCCIL ROW as per Approved Land Acquisition Plan.

Hiring of JCB Machine (In good working Condition) for leveling and dressing Ground/dismantling structures including Disposal of debris through dumpers etc. With contractor's labour, JCB Machine, Dumper machine, machine operator, fuel etc. The contractor shall arrange road 4 Permit for all vehicles for all the States of Operation, as per instructions of engineer Incharge and vehicle shall not be more than three years old, Payment shall be made for actual working hours at site as per log Book to be maintained by Engineer-in-Charge. Payment will be made for working of machines only Including idle hours in continuous Operation. No other idle hours will be paid.

Preparation of land plans using plane table or any other surveying technique along 5 the existing track (if any) and both sides of proposed alignment of detour, calculation of land area has acquired, collection of all necessary document & information and preparation & submission of land Plan to IR divisions for Handing over land to IR.