CERTAIN REPAIR TO OTM ACCN OF CERTAIN REGIMENT UNDER GE AMRITSAR

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed.

All as per Srl item No 6 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 5 shall be reused after necessary cleaning of mortar) complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 complete all as specified and directed.

Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered/old decorated surfaces complete all as specified and directed.

Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces complete all as specified and directed.

Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed.

Material and labour preparation of newly plastered/old decorated surface of wall and applying two coats of oil bound distemper with necessary putty filling complete all as specified and directed.

Material and labour preparation of newly plastered/old decorated surface of ceiling etc and applying two coats of oil bound distemper with necessary putty filling complete all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

Taking down Chowkats or frames from the opening of size exceeding 1.5 sqm but not exceeding 4 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

Taking down Shutters of any description of size not exc 1sqm each complete all as specified and directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

Taking down Wooden Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening after necessary easing and resucring with new SS butt hinges and new screws complete all as specified and directed.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf complete all as specified and directed. Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed. NOTE:-Sheet glass and painting shall be measured and paid Separately.

Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed

Factory made single extructed WPC but frame size 65x 125 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly) complete all as specified and directed.

Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete all as specified and directed.

Supply and Fixing Steel rolling shutters(1.25mm thick sheet), with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete all as specified and directed.

Supply and Fixing Ball bearing for rolling shutter ,complete all as specified and directed.

Supply and Fixing Safety lever locks mild steel with 4 lever ,complete all as specified and directed.

Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels complete all as specified and directed.

Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed. ( Min. thickness of powder coating 50 micron)

Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) complete all as specified and directed.

Supply and Fixing Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. (Min. thickness of powder coating 50 micron)

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed

Supply and Fixing 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in aluminium door as per specification and drawing.

Supply and Fixing Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed.

Supply and Fixing in repair door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej complete all as specified and directed.

Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed.

Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.

Material and Labour two coats of synthetic enamel painting over a priming coat of red oxide including prepration of previously untreated surfaceson steel surfaces of any description over 10 cm in width or girth not otherwise described complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grith and applying one coat of synthetic enamel paint complete all as specifed and directed.

Material and Labour two coats of synthetic enamel over pink primer including prepration of previously untreated surfaces painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described , complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads in wooden/steel window complete all as specified and directed.

Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty complete all as specified and directed.

Supply and Fixing 3mm thick figured glass pin head type & glazing with oil putty complete ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing complete all as specified and directed.directed.

Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

Supply and Fixing 150mm long Aluminium handles, cast type anodised complete all as specified and directed.

Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 etc., complete all as specified and directed.

Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting etc etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick cement plaster in CM 1:4 etc., complete all as specified and directed.

Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15mm thick screed bed(1:6) etc complete all as specified and directed.

Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 10mm thick cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. and Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed.

Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) as in floors etc over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) as in skirting etc.over 15mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

Supply and Fixing in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separatelycomplete all as specified and directed.

Supply and Fixing of Vitreous china wash down water closet pan( pedestal pattern), white complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.

Supply and Fixing in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed.

Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) Make-Prayag/Shakti complete all as specified and directed.

Supply and Fixing in repair PVC Jet spray suitable for EWC complete all as specified and directed.

Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and Fixing in Repair vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore complete all as specified and directed.

Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail complete all as specified and directed.

Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

S/F in repair15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

S/F in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

Supply and Fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed.

Supply and Fixing in repair Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed.

Supply and Fixing in repair PVC waste pipe32mm dia fixed to WHB/Urinals complete all as specified and directed.

Supply and Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed.

Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.

Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittingscomplete all as specified and directed.

All as per Srl item No 86 above but laid in trenches complete all as specified and directed.

Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed.

Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length laid in trenches etc. including all fittings complete all as specified and directed.

Supply and Fixing 110mm PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and Fixing 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and Fixing 75mm PVC floor trap with grating complete all as specified and directed.

Supply and Fixing 75mm PVC multi floor trap with grating complete all as specified and directed.

Supply and Fixing 125/110mm PVC gully trap setting and jointing with solvent cement complete all as specified and directed.

Supply and Fixing 75mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply and Fixing 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply and Fixing 75mmPVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and Fixing 110mmPVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fixing of Stack clamps for110 mm pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Supply and fixing of Stack clamps for 75 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Demolition reinforced roofs, floors (other than ground floors), beams staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Material and Labour for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in chajjas, fascia, slab and the like complete all as specified and directed.

Use and waste of formwork to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

Supply and Fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and directed.

Material and Labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4,complete all as specified and directed.

Material and Labour green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick cement screed bed in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match with shade of marble including grinding, rounding to edges and polishing complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish avg 50mm thick, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating complete all as specified and directed

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application along the length of 100mm lapping strip to either sides and sealed in after cleaning down the roof by brooms complete all as specified and directed.

Material and Labour for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement complete all as specified and directed

All a per Srl item 113 above but except tiles. Note:-Old serviceable tiles obtained from dismantling shall be reused after necessary cleaning of mortar etc.

Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound @2% weight of cement and, finishing even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separatly).

Supply only integral water proofing compound complete all as specified and directed.

Material and Labour for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

Material and Labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed.

Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. Repair all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with Shali SBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed.

Material and Labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even complete all as specified and directed.

Material and Labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 25mm thick sand cushioning complete all as specified and directed.

Material and labour machine pressed coloured chequered cement concrete tile ISI Marked of size 30cm x30cmx22-25mm thick over and including 15mm thick cement screed in CM 1:6 set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles complete all as specified and directed.

Dismantling boarding , any description , fixed in any position with screws complete all as specified and directed.

Supply and Fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Material and Labour for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening complete all as specified and directed.

Supply and Fixing in repair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated ,etc.) sheets in roof coverings complete all as specified and directed.

Material and Labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets Fixed with L-type or screws J-type or cranked hook boltsin roofs, walls etc. complete all as specified and directed.

All as per Srl item 130 above but except asbeastos sheets Note:-Old serviceable sheets obtained from dismantling shall be reused after necessary cleaning etc.

Dismantling structural steel work including doors, gates including truss etc, complete all as specified and directed.

Material and Labour Cutting holes (not exc 150sqcm) or into wallls or through brick walls built in Cement Mortar and making good with cement mortar 1:3 or Cement Concrete 1:2:4 Type B-1 as required at sitecomplete all as specified and directed.

Supply and Fixing Steel work in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed.

Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified and directed.

Taking down aluminium door shutters of area not exc 1 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified and directed.

Material and labour for damp proofing treatment to wall with two component acrylic polymer cementitious water proof elastomeric coating food grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joints of fibre mesh not be less than 10mm, then finally apply second layer mix by brush to entire surface of container covering 0.6-0.78 sqm/G at 1mm thickness in two coats depending on the level of substrate and curing it minimum 3 days complete all as specified and directed. Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6m etc.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed

Material and Labour for point wiring drawn in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) including fixing of switch/socket/regulator/ etc complete all as specified and as directed. Note : 1. Switche/socket/regulator/etc shall be measured and paid separately

For one light /fan/ buzzer point controlled by one 5 Amp switch one way

For one three pin socket outlet 5 Amps independent board complete

For one three pin 5 Amps socket outlet on the same board with other switches

For one light point controlled by two way switch

All a per item No 141 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete.

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) including fixing of switch/socket/regulator/ etc complete all as specified and as directed. Note : 1. Switche/socket/regulator/etc shall be measured and paid separately

For one light /fan/ buzzer point controlled by one 5 Amp switch one way complete all as specified and as directed.

For one three pin socket outlet 5 Amps independent board complete all as specified and as directed.

For one three pin 5 Amps socket outlet on the same board with other switches complete all as specified and as directed.

For one light point controlled by two way switch complete all as specified and as directed.

All a per item No 143 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and fixing of Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed by Engr-in-Charge

Supply and fixing of Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing ceiling rose 65X50 mm three terminals complete all as specified and directed.

Supply and fixing of Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Ding Dong bell AC 230 Volts complete all as specified and directed .

Supply and fixing of Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and directed.

Supply and fixing of in replacement for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories. (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No.

Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement MCB single pole 6 to 32 Amps complete all as specified and directed.

Supply and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed

Supply and fixing in replacement 40 to 63 Amps MCB TPN, 415 Volt complete all as specified and directed.

Supply and fixing of in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps complete all as specified and directed.

Supply and fix in replacement ,Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan complete all as specified and directed. Note: Making suitable opening for fixing air fan shall be deemed included in the quoted rate of item.

Supply and fix in rep[lacement , Exhaust fan of size 300mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply, copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection complete all as specified and directed. Note: Making suitable opening for fixing exhaust fan shall be deemed included in the quoted rate of item. Note for Sr item no - 166 and 167 Old item shall be deposited in store yard

Supply and fix in replacement LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories complete all as specified and directed.

Supply and fix in replacement LED decorative Gate ligh/Garden lights 20 watt light fitting with all accessories including making connections by using suitable size of PVC wire any type complete all as specified and directed.

Supply and fixing Iin replacement LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed.

Supply and fix in replacement SMD/PLUTO NEO LED luminare 36/40 watt 600 x 600 mm 220 V AC LED ceiling light recessed/surface type with high efficiency PMMA diffuser soft glass free light complete with driver ,holders and LED lamps stable for roof/ceiling including fixing arrangements and connecting with copper wire flexible three core 1.5 sqmm PVC insulated 3 core cable from ceiling rose to light fitting complete all as specified and as directed.

Supply and fix in repalacement decorative Ceiling light 12 watt light fitting LED type with accessories including any type complete all as specified and as directed.

Supply and fixing of in replacement 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 sqmm 2 core cable complete all as specified and directed.

Supply and fixing of in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable shall be measured as one unit/ one running meter.

Supply and fixing of in replacement, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit shall be measured as one unit/ one running meter.

Supply and fixing of in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running meter.

Supply and fixing of in replacement, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running meter.

Material and labour for replacement Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in electrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate complete all as specified and directed. Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm shall be included in quoted rates .

ESS KAY BUILDER (BID ID -3489607)

M/s. M Company (BID ID -3489213)

TARSAM LAL SAINI CONTRACTOR (BID ID -3484268)