Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹37.3 L+₹97,701.67 (2.69%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹38.3 L+₹1.9 L (5.18%)Rejected-Finance | L3 | Rejected-Finance Not Lowest |
Tender Value
₹36.5 L
EMD Value
₹73,000
Closing Date
15 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
PROVN OF CERTAIN REVENUE WORK AND MINOR WORK AT BAGRAKOTE STN UNDER GE SEVOKE ROAD
2022_MES_538702_1
GE/SEV/21 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹73,000
Yes
27 Aug 2022
16 Jul 2022
17 Aug 2022
16 Jul 2022
15 Aug 2022
1 Aug 2022
18 Jul 2022 - 27 Jul 2022
Amount
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated material for foundation and laying / taking out pipe line, cables etc in hard/dense soil complete all as specified and directed
M&L for PCC 1:4:8 type D-2 (40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L for brick work with Fly Ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in each layer in soft/ loose soil complete all as specified and directed
Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.
M&L for broken stone boulders Hardcore of gauge not exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L RCC 1:2:4 , type B1, (using 20mm graded crushed stone aggregate ) as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work complete all as specified.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips complete all as specified.
All as per item No. 9 above but 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
Supply only water proofing compound complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection & paving, surface finished even & smooth without using extra cement complete all as specified and directed.
S&F 15 mm bore GI pipe medium grade with all fittings and fixed to wall and ceiling or laid in floors complete all specified and directed.
Preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S&F 25mm bore PTMT ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
S&F 25mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
M&L for rendering in CM (1:4), 15mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation as in sand cushioning for interlocking paver blocks complete all as specified and directed. Note:- Consolidated thickness shall be measured.
M&L 100mm thick cement concrete 1:2:4 type B2 (using 40mm graded crushed stone aggregated) finished fair & even without using extra cement complete all as specified.
Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.
Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.
M&L 75mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregated ) as in sub base complete all as specified.
M&L 75mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregated) as in sub base of flooring complete all as specified.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt wilded tubes confirming to IS 1161-1979 grade St - 240 complete all as specified and directed.
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 W Gde-E 250 Quality A complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work as reqd complete all as specified and as directed
M&L 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape. Complete all as specified and as directed
Excavation in trenches not exc 1.5 mtr wide but depth exc 1.5 mtr and not exc 3.00 mtr in depth and getting out excavated material for foundation and laying / taking out pipe line, cables etc in hard/dense soil complete all as specified and directed
M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.
M&L moorum/red bajri filling in floors or pavings laid in layers n exc 15 cm thick spread levelled and rammed including watering complete all as specified and as directed.
M&L 50mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregated ) as in sub base complete all as specified.
M&L for 40mm thick PCC 1:2:4, type B0 (using 12.50mm graded crushed stone aggregated) for DPC to horizontal or vertical surfaces including necessary from work incl mixing WPC as per manufactures instructions complete all as specified and as directed. Note : WPC shall be measured seperately.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
S & F steel ventilators with top hung shutter including hinges,steel peg stay, including one shop coat of Zinc Chrome primer complete all as specified.
S&F 3mm thick glass sheet ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one end screwed the other or screwed both end, each screwed end to be fitted with washer and one hexagonal or square nut exceeding 05cm and not exceeding 10cm long complete all as specified and as directed.
M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.
M&L rendering 10mm thick in CM 1: 4 on fair faces of brick/concrete surfaces for fixing tiles / stone complete all as specified and as directed.
M&L for glazed ceramic coloured tiles on vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and as directed.
S&F vitreous china urinal half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , grating and Union for discharge pipecomplete all as specified and as directed. (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe)
S&F urinal spreader of PTMT, any colour, for fixing with size 15mm dia pipe (minimum weight 60 gm) complete all as specified and as directed.
S&F PVC connection 15mm dia with PTMT nuts of length 600mm. Complete all as specified and as directed.
S&F fancy type chromium plated stop valves cast copper alloy, , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 40 mm bore bottle trap of PTMT, having minimum water seal of 25 mm (minimum weight 270gms) complete all as specified and as directed.
S&F Vitreous China wash basins, white, flat back, size 550x400mm excluding taps, waste but including brackets complete all as specified and directed.
S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F low density 32mm bore polythene waste pipe (LDPE) complete all as specified and as directed.
M&L for RCC 1:2:4 type B1, (using 20mm graded crushed stone aggregate ) as in slabs supported on walls, beam and columns in floors, roofs, landings, balconies, canopies, deck slabs and shelves and the like all as specified.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
M&L for cement concrete (1:4:8) type D2 concrete to drain pipes of 100mm bore includings packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for mild steel round bars 10mm dia and over, cut ot lenght, bent to shpe requied, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe 410 W Gde E-250 Quality A or Fe 290 Gde E-165 complete all as specified and directed.
M&L for Brickwork with subclass B brick straight and curved on plan to exc 6 m mean radius built in C.M. 1:4 complete all as specified and as directed.
M&L for Brickwork with subclass B bricks, one and half brick thick honey comb walls built in C.M. 1:4 complete all as specified and as directed.
M&L for Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakge pits soakge wells complete all as specified and as directed.
S&F circular manhole covers and frames, size of clear opening 560 mm medium duty (MD) solid type complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.
M&L 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregated) as in sub base of flooring complete all as specified.
S&F framed mild steel work as in doors gates of angles or other section with gusset plates, rails, braces etc complete drilling for fixing of steel sheeting or other covering doors etc to be prepared for hanging or slidings with and includings either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete conforming to Fe 290 (Gde-E-165)
S&F mild steel 1.25 mm thick plain black sheet in wall cladding, steel gates and similar work cut of size holes punched including round headed screwes clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required complete all as specified and as directed.
M&L bricks sub class B laid on edge in floor old size bricks bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and as directed.
M&L 200mm bore cast iron pipe with spigot and socket ends vertically cast class B in any length complete all as specified and as directed.
M&L for shingle filling in floor or paving laid in layers n exc 15 cm thick spread levelled and blinded with earth and rammed including watering complete all as specified and as directed.
M&L PCC 1:2:4 type C-1 (using 20 mm gradded crushed stone aggregated) as in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel n exc 30 cm inner grith in cement concrete using extra cement including forms moulds mitred stopped end complete all as specified and as directed.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out excavated material for laying/ taking out pipe line, cables, etc in soft/ loose soil complete all as specified and directed
M&L for preparing new steel and iron surfaces of any description over 10 cm in width or girth and apply two coats of synthetic enamel paint complete all as specified and directed
S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and as directed.
S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, etc complete including providing one shop coat of zinc chrome primer complete all as specified and directed..
S & F factory made 35mm thick plain, framed panelled shutter (two panel) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering on both faces. The size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood (Hollock/Sal/Kalasiris), complete all as specified and directed.
S&F mild steel tower bolts stove enamelled black with bright bolt 200 mm long complete all as specified and as directed.
S&F 300 mm long mild steel sliding door bolts plate type, stove enamelled black, with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate & two on staple plate complete all as specified and as directed.
S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded including one shop coat of zinc chrome primer complete all as specified and directed.
S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, Fe 290 Gde-E-165 complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
M&L for preparation new steel and iron surfaces of any description n. exc 10cm in width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F Anodised aluminum section powder coated in partition / frame for door, shutters, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco). Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing element of these items shall be deemed to be included in quoted rate.
Supply only float glass 4.0 mm thick ordinary quality and glazing with aluminium beads in squares exc 0.50 sqm in each pane including securing glass in metal frames complete all as specified and as directed.
Supply only 9mm thick prelaminated practicle board, interior grade prelaminated both sides with decorative choice lamination & other side balanching with laminate fixed with screws to metal frame work complete all as specified and as directed.
Supply only solar control film 25 micron reflective type to glass panes as per instructions of manufactures exc 1.50 sqm complete all as specified and as directed.
S&F mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to stepsincluding embeding in concreteand screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc complete all as specified and as directed.
S&F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanished MS wire, staples or steel pins etc (Each line wire to be measured separately.)
Supply only chain link fencing with 4mm dia galvanised steel wire ,size of mesh 100mmx100mm complete all as specified.
Fixing only chain link fencing including line wires , any mesh, size and type to any type of standard, rails , straining bolts, etc including provision of binding wire complete all as specified
S&F Rotational moulded polyethylene water storage tanks 500 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
M&L for concealed point wiring with two single core PVC insulated, FRLSH unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated FRLSH unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including MS sunk terminal box for appropiate size suitable for flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete all as specified and as directed. Note: Cost of making good the disturbed surfaces (if any) & matching with the existing surface is deemed to be included in the quoted rate.
All as per Item Sl No - 97 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor FRLSH of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor FRLSH of size 1.5 sqmm green in colour as earth lead for 5/6 A switch -socket point on independent board.
All as per Item Sl No - 97 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor FRLSH of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor FRLSH of size 1.5 sqmm green in colour as earth lead for 5/6 A switch -socket point on same board.
S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F decorative box type fittings with LED light fittings 20 watt 4 feet with Al extruded batten luminaire for 230 volts AC all as directed by Engineer-in- Charge
S&F new genration energy saving & environmental friendly building security light with high power LED as light source lamp type 25 watt with SPD, IP 66 protection with rod and connecting arrangements complete all as specified and as directed.
S&F decorative box type fittings with LED light fittings 9 watt 2 feet with Al extruded batten luminaire for 230 volts AC all as directed by Engineer-in- Charge
Supply & Fixing DB with sheet metal enclouser 240 volts, 04 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
S&F MCB, SP,240 volts, breaking capacity 10 KA, C curve, rating 6 to 32 amps, ISI marked complete all as specified and as directed.
S&F MCB, DP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on completion.
S&F Switch Socket combination, 2-in-1, 3 pin, 5 Amps flush type universal , 240 volts complete all as specified and as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.
Supply and laying in trenches /wall LT UG , XLPE insulated, heavy duty armoured sheathed 1100 volts grade 6 Sq mm, 2 core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm light grade with fittings for cable protection complete all as specified and as directed.
Cutting & screwing existing water pipe line mains and connection with new pipe line laid including necessary fitting required at site complete all as specified and directed.
Supply & laying in trenches GI pipe 20 mm bore medium grade ISI marked including fittings in trench/wall complete all as specified and directed.
Supply & laying in trenches GI pipe 25 mm bore medium grade ISI marked including fittings in trench/wall complete all as specified and directed.
M&L steel tubular swaged poles, type 410 SP-31, 9 mtr long with CI base plate and finial taper plug, bolts, nuts and screws including painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
S&F LED security light fittings of 72 w , die cast Alluminium body with IP 66 protection with high powered LED as light source with intedrated driver and surge protection complete all as specified and directed
M&L for street light bracket made out of MS angle/flat iron suitable for fixing of street light complete all as specified and directed
M&L of weather proof PVC insulated copper conductor cable 1.5 sqmm 3 core complete all as specified and as directed.
Supply and fixing street light junction box suitable "weather proof" for outside installation with metric knockout entry for cable of size 10-16 sqmm and size 155x210x92mm with terminals and provision of one MCB SP 6A complete with fixing arrangements on 40mm dia GI pipe 1 mtr long (light grade) with necessery clamps incl necessery cable connections all as specified and as directed of Make Hensel/ Sintax/C&S. Note: Rate of all necessery connected items such as MCB SP, GI pipe, clamps etc are deemed to be included in quoted rates.
M&L for PCC 1:3:6 type C-2 (40 mm graded crushed stone aggregate) as in foundation, of pole/stay including formwork where required complete all as specified and as directed.
M&L for PCC 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in coping, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for PCC 1:4:8 type C-2 (40 mm graded crushed stone aggregate) as in base foundation of pole/stay including formwork where required complete all as specified and as directed.
Supply and laying in trenches /wall LT UG , XLPE insulated, heavy duty armoured sheathed 1100 volts grade 10 Sq mm, 4 core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified.
S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chase or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earting etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.
SRI SURAJIT SENGUPTA
M S ALOK SAHA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .