Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹2,000
Closing Date
10 Oct 2022, 11:00 amClosed
superintending engineer
S.E,EUDC-II NOIDA
Construction of 11 KV HT Line to separate Village Duryai and Kacheda emanating from 11 KV Bishnoli Feeder under EDD-Dadr
2022_PVVNL_734638_1
E-Tender No. 52/2022-23, EUDC-II, Noida.
Open Tender
Electrical Works
Item Rate
15 days
S.E, EUDC-II NOIDA
attached in doc
2 documents required · 2 mandatory
₹1,180
S.E,EUDC-II NOIDA
₹2,000
10 Oct 2022
5 Oct 2022
10 Oct 2022
5 Oct 2022
10 Oct 2022
5 Oct 2022
Amount
Safe Cartage of PCC 8.5Mtrs Pole from ESC Noida/Sahibabad/ Ghaziabad / any Store of PVVNL Discom to JE Store and from JE store to various points of site of work including loading and unloading at both ends.
Cartage of Other Line accessories (Pin Insulator, Cross Arm, T-Channel, Top Channel, Earthing, Disc Insulator, M.S. Agnle, M.S. Channel, 30mtr ACSR Weasel conductor, 120mtr 3x185sqmmm Cable etc.) and materail realted to work from ESC Noida/Sahibabad/ Ghaziabad / to JE Store and from JE store to various points of site of work including loading and unloading at both ends.
Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.
Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.
Fabrication and Errection of Sectional Double Pole for 11 KV Line as per site requirement with grouting and concreting as per RESPO.
Cartage of line material ACSR Rabbit Conductor sqmm from ESC Noida/Sahibabad/Ghaziabad /any store of Discom PVVNL to JE Store and from JE store to various points of site of work including loading and unloading at both ends.
Laying, Sagging and Re-Sagging of ACSR Rabbit Conductor with complete work in all respect.
Making, Jointing and Fixing of Jumpers by ACSR Weasel Conductor on the pole
Providing and Fixing of 11 KV Straight Through Box (Denson, compaq and 3M) suitable for 11 KV 3x185mm.sq.mm. XLPE cable with the help of Jointer after digging kaccha/pakka road after fill it again and complete connections in all respect.
Laying of 11 KV size 3x185 sqmm XLPE Cable by open method with three sides of sand and bricks and above one side bricks. (only cable will be provided by the deptt.)
Providing and Fixing of G.I. Pipe suitable for 11 KV size 3x185 sqmm XLPE Cable (PVVNL Approved) with complete work in all respect as per RESPO. (all material will be provided by the Department.)
Fixing of 11KV Pin Insulator with pin and clamp and nut & bolt with complete work in all respect as per RESPO.
Fixing of Top M.S. Channel 100x50x2240mm with complete work in all respect as per RESPO.
Fixing of M.S. angle with complete work in all respect as per RESPO.
Providing and Fixing of Number Plate with complete work in all respect as per RESPO.
Providing and Fixing of Danger Board with Clamp with complete work in all respect as per RESPO.
Providing of G.I. wire for Guarding the above 11 KV Line with complete work in all respect as per RESPO.
Guarding the above 11 KV Line by the G.I. wire for with complete work in all respect as per RESPO.
Fixing of 11KV Disc Insulators with Fitting complete work in all respect as per RESPO.
Providing and Fixing of PG Calmps with Bolt and Nut & Bolt as per requirement.
Providing and Fixing of F- Brackets with Calmps with Bolt and Nut & Bolt as per requirement.
Fixing of 11KV Cross Arm with Calmps with Bolt and Nut & Bolt as per requirement.
Fixing of T-Channel with Calmps with Bolt and Nut & Bolt as per requirement.
Fixing of Droper Channel with Calmps with Bolt and Nut & Bolt as per requirement.
Providing and Fixing of E- Brackets with Calmps with Bolt and Nut & Bolt as per requirement.
Providing and Fixing of Holding Clamp, Bolt and Nuts & Washers as per requirement.
Providing and Fixing of Eye Bolt for Guarding as per requirement.
Providing and Fixing of MS Bolt and Nuts as per requirement.
Providing and Driving of MS earth rod of size 20x2500 mm in earth and joining through G.I. wire of 7/8 SWG between support and earth electrode by providing proper size of bolts and nuts for pole earthing.
Erection of fixing of grouting of stay rod in cement, sand and brick ballast in ration 1:4:8 in Block 600*600*300 mm with binding & nuzzling including providing & fixing of stay insulator complete in all respect with grouting.
Fixing of Stone Pad size 300x300x75mm for ST Poles with complete work in all respect as per RESPO.
Anjali Electricals
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .