Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.7 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹55.3 L+₹1.6 L (2.99%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹57.2 L+₹3.5 L (6.46%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | EAST INDIA CONSTURCTION & SUPPLY CO L3 | M/s TOVISHE ACHUMI L2 | MEGHALAYA CONSTRUCTION AND SUPPLY CO. L1 |
|---|---|---|---|---|---|---|
| 1.01 | SCHEDULE ‘A’ PART- I ( Addn and alteration ) :- Demolishing cement concrete nominal concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead as per direction of Engineer – In – Charge on roof slab. | 3.52 | Cum | 10,584.64 ₹10,584.64 | 10,208 ₹10,208 Lowest | 10,950.72 ₹10,950.72 |
| 1.02 | Providing and laying of grading roof for water proofing treatment with cement concrete 1:2:4 with graded stone aggregates 20 mm nominal size | 3.52 | Cum | 33,475.2 ₹33,475.2 | 33,123.2 ₹33,123.2 Lowest | 40,976.32 ₹40,976.32 |
| 1.03 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : | 93.94 | Cum | 87,739.96 ₹87,739.96 | 78,345.96 ₹78,345.96 | 77,782.32 ₹77,782.32 Lowest |
| 1.04 | Dismantling cement asbestos sheets or other hard board in ceiling , including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | 87.34 | Sqm | 12,751.64 ₹12,751.64 | 12,227.6 ₹12,227.6 | 6,201.14 ₹6,201.14 Lowest |
| 1.05 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead. | 0.88 | Cum | 4,113.12 ₹4,113.12 | 4,012.8 ₹4,012.8 Lowest | 5,011.6 ₹5,011.6 |
| 1.06 | Providing and fixing 12.5mm thick square edge Gypsum tile of size 595x595mm, made of Gypsum plasterboard and fixed in true horizontal level , suspended on interlocking metal grid of hot dipped galvanized steel section, consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick ( minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm centre to centre to form a grid of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in grid including required cutting/making, opening for services etc complete. Main T runner to be suspended from ceiling using GI slotted cleats od size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4 mm GI adjustable wire etc all complete with white colour tiles. | 87.34 | sqm | 2,14,070.34 ₹2,14,070.34 | 2,06,122.4 ₹2,06,122.4 | 1,68,828.22 ₹1,68,828.22 Lowest |
| 1.07 | Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster incl disposal of rubbish to the dumping ground within 50 mtr lead. | 301.4 | Sqm | 27,126 ₹27,126 | 26,523.2 ₹26,523.2 | 21,098 ₹21,098 Lowest |
| 1.08 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under incl cutting the patch in proper shape, racking out joints and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50m lead etc. complete with CM 1:4( 1 cement : 4 coarse sand). | 301.58 | Sqm | 3,16,659 ₹3,16,659 | 3,07,611.6 ₹3,07,611.6 | 2,23,470.78 ₹2,23,470.78 Lowest |
| 1.09 | Demolishing cement concrete nominal concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead as per direction of Engineer – In – Charge on roof slab. | 4.54 | Cum | 13,651.78 ₹13,651.78 | 13,393 ₹13,393 Lowest | 14,123.94 ₹14,123.94 |
| 1.10 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of :
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). | 26.7 | Sqm | 32,307 ₹32,307 | 31,506 ₹31,506 Lowest | 32,040 ₹32,040 |
Tender Value
Refer Docs
EMD Value
₹1.0 L
Closing Date
13 Nov 2023, 10:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO-I(Wks)
SO-I(Wks) ARTC and School Shokhuvi
Additionand alteration of B R works of existing 08 x Type_I (G I) (Bldg No. DT/SF//74/94 and DT/SF/75/94) in two blocks at ARTC S , Shokhuvi (Nagaland)
2023_ARMHA_778824_1
VIII.28028/ARTCS/NIT/23-24/38
Open Tender
Civil Works
Works
365 days
Shokhuvi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
Commandant, ARTC and School
₹1.0 L
16 Dec 2023
31 Oct 2023
14 Nov 2023
1 Nov 2023
13 Nov 2023
1 Nov 2023
1 Nov 2023 - 11 Nov 2023
SCHEDULE ‘A’ PART- I ( Addn and alteration ) :- Demolishing cement concrete nominal concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead as per direction of Engineer – In – Charge on roof slab.
Providing and laying of grading roof for water proofing treatment with cement concrete 1:2:4 with graded stone aggregates 20 mm nominal size
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
Dismantling cement asbestos sheets or other hard board in ceiling , including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead.
Providing and fixing 12.5mm thick square edge Gypsum tile of size 595x595mm, made of Gypsum plasterboard and fixed in true horizontal level , suspended on interlocking metal grid of hot dipped galvanized steel section, consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick ( minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm centre to centre to form a grid of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in grid including required cutting/making, opening for services etc complete. Main T runner to be suspended from ceiling using GI slotted cleats od size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4 mm GI adjustable wire etc all complete with white colour tiles.
Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster incl disposal of rubbish to the dumping ground within 50 mtr lead.
Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under incl cutting the patch in proper shape, racking out joints and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50m lead etc. complete with CM 1:4( 1 cement : 4 coarse sand).
Demolishing cement concrete nominal concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead as per direction of Engineer – In – Charge on roof slab.
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering etc.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Providing and laying non skid ceramic floor tiles of size 300x300mm ( thickness to be specified by the manufacturer) of approved make, in all colours and shades except white, Ivory, Grey laid on 20mm thick CM 1:4 (1cement :4 coarse sand), incl grouting the joints with white cement and matching pigments. etc. complete.
Providing and laying Vitrified tiles in Size of Tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
Providing and fixing of wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(Granite of any colour and shade, Area of slab over 0.50 sqm)
roviding and making plinth protection 50 mm thick of cement concrete (1:3:6) with stone aggr 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
M& L for half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand).
Providing and laying 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)
Dismantling doors, windows shutters including chowkhats, holdfasts etc complete of area 3 sqm and below.
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in door frame and guard bars.
Providing and fixing factory made steel glazed windows and ventilators , side/top/centre hung , with beading and all members such FD7,F4B,K11B etc, including providing and fining hinges, pivots, including priming coat of approved steel primer of fixing with 15x3mm lugs 10cm long embeded in cement concrete block 15x10x10cm of cement concrte (1:3:6).
Providing and fixing fly proof wire gauge to windows, doors and ventilators with MS flat 15x3mm and nuts & bolts complete of 0.63mm dia wire and 1.4 aperture on both sides.
Providing and fixing glass panes with putty and glazing clips in steel doors, windows and ventilators all complete with 4mm thick glass panes.
Providing and fixing 35mm thick factory made laminated flush door shutters decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete.
Providing and fixing of mosquito proof shutters using galvanized MS wire gauge of average width of aperature 1.4mm in both directions with wire of dia 0.63mm for door of 35mm with 2nd class teak wood.
Providing and fixing factory made 30 mm thick door shutter made out of solid panel , single piece extruded soild PVC profiles. as per manufacturer's specifications and direction of Engineer-in-charge.Non decorative finish (matt finish)
Providing and fixing aluminium tower bolts of size : 125x10 mm with necessary screws etc. Complete.
Providing and fixing aluminium handles of size : 100 mm, transparent or dyed to required colour or shade, with necessary screws etc. complete
Supply and fixing aluminum sliding door bolts, transparent or dyed to required colour or shade, with nuts and screws etc complete of size 250x16mm.
Steel work in built up tubular round sections for truss and wall cladding including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.with hot finished seamless type tubes.
Providing and finishing with two or more coats applied @ 1.43 ltr/10 Sqm over existing cement paint surface Premium Acrylic smooth exterior paint with silicon additives of required shade including removing of old water proofing cement paint by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.
Distempering with oil bound washable distemper approved brand and manufacturer to given an even shad in old work (one or more coats) incl preparation of old surface by removing old paint by scrapping, sand papering incl necessary repairs to scratches etc complete.
Distempering with oil bound washable distemper approved brand and manufacturer to given an even shad in old work (one or more coats) incl preparation of old surface by removing old paint by scrapping, sand papering incl necessary repairs to scratches etc complete.
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete.
Providing and painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture to give an even shade.
Providing and fixing of curtain rods of 1.25mm thick chromium plated brass plate , with two chromium plated brass brackets fixed with CP brass screws and wooden plugs etc, wherever necessary complete of size 20mm dia.
Providing and fixing for weather bd 40 mm tk
Providing and Painting two or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade.
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink without drain board of size : (610 x 460 mm) bowl depth 200 mm as per IS : 13983 with C.I. Brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.
Providing and fixing 32 mm dia flexible P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete..
Providing and fixing water closet squatting pan, White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
Providing and fixing of PTMT 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms
Providing and fixing of 15mm nominal bore CP bib cock of approved quality.
Providing and fixing of 15mm nominal bore CP angle cock of approved quality.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing white vitreous pedestal type china wash hand basin (Size 630x450 mm) incl pedestal with C.I. Brackets, 15 mm C.P Brass pillar taps, 32 mm C.P. Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. complete.
Providing and fixing 600x450mm beveled edge mirror of superior glass ( of approved quality) complete with 6 mm thick hard board backing fixed to wooden cleats with CP brass screws and washers complete..
Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 75 mm dia.
Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 100 mm dia.
Providing and fixing of 15mm nominal bore connection pipe of approved quality.
Providing and fixing of 15 mm nominal bore Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms of approved quality.
Providing and fixing C.P. brass shower rose ,100 mm diameter with 15 or 20 mm inlet :
Supply and fixing of stainless steel plate rack of approved quality (TP) incl fittings etc. complete. (FD-242/TP) Ser No. : 216 of Area rate list 2017-18.
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (15 mm to 40 mm dia)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 40 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed wk)
Construction of brick masonry manhole in cement mortar (1:4) with RCC top slap with (1:2:4) mix foundation concrete (1:4:8) mix inside plastering 12 mm thick with CM (1:3) finished with floating coat of neat cement and making channel in cement concrete (1:2:4) etc complete with common burnt clay FPS (non modular) bricks.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
(50 User Septic Tank ) Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth upto 50m and lift upto 1.5m in all kind of soil.
Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches ( not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m for all kinds of soil.
Extra for every additional lift of 1.5m or part thereof in excavation/banking excavated or stacked materials.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all work upto plinth level 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregates 40 mm nominal size)
Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregates 20mm nominal size)
Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundations etc in layers not exc 20 cm in depth, consolidating each deposited layers by ramming and watering lead upto 50 m and lift upto 1.5m.
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying up to plinth level reinforced cement concrete and the like, excluding the cost of centering , shuttering, finishing and reinforcement with 1:2:4 ( 1Cement : 2 Coarse sand : 4 graded stone aggregates 20 mm nominal size) in baffle wall.
Providing and hoisting and fixing up to floor five level precast reinforced cement concrete work in Manhole chamber slab including cost of centering, shuttering but excluding cost of reinforcement with (1:2:4) mix with 20 mm nominal size graded stone aggregates.
Centering and shuttering including strutting, propping etc and removal of form for suspended floors, roof slab.
Centering and shuttering including strutting, propping etc and removal of form for vertical surfaces for baffle wall.
Centering and shuttering including strutting, propping etc and removal of form in sides of roof slab.
Steel reinforcement for RCC work including straightening, cutting, bending placing in position and binding all complete (TMT bars)
Providing and laying 20 mm thick Cement plaster 1:3 (1 Cement : 3 Coarse sand) finished with a floating coat of neat cement.
Providing and laying 15 mm thick Cement plaster 1:4 (1 Cement : 4 Coarse sand) on rough side of single or half brick wall. (Out Side)
Providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturers specification
Providing and fixing PVC vent pipe 75 mm dia with vent cowl fixing properly.
(Soak Pit ) : Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
(Paver Block foot Path Ways ): Earth work in surface excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed in all kind of soil.
Supplying and stacking at site.(Over burnt (Jhama) brick aggregate 90 mm to 45 mm)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M 30 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand filling the joints with fine sand etc all complete as per the direction of Engineer – In – Charge.
Half brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure upto plinth level in CM 1:4 (1 cement : 4 coarse sand)
Providing and laying 15 mm cement plaster on rough side of single or half brick wall of cement of mix 1:4 (1 cement : 4 coarse sand) Note : Schedule of credit mentioned at page No.17 of NIT shall be deducted from Tender amount )
M/s TOVISHE ACHUMI
EAST INDIA CONSTURCTION & SUPPLY CO
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .