VGTPS -Civil -Construction of 2 blocks of S Type Quarters (12 tenements) and raising of 1st and 2nd floor over the existing T- type quarters (3 Tenements) in the second phase at VGTPS/ Ramanathapuram

Amount

Dismantling the existing Pressed tiles with Weathering course suitable for first floor construction including cost of removal of all debris, all labour, lead, lift etc., complete as instructed by the Engineer at site.

Dismantling the RCC Column concrete in the ground floor parapet portion suitable for first floor construction including cost of removal of all debris, all labour, lead, lift etc., complete as instructed by the Engineer at site.

Earthwork excavation for foundation in all classes of soil, hard red earth, shales, murram, black cotton soil and depositing on bank not under water with an initial lead of 10m and lift of 2m including cost of all materials, labour, lead, lift etc., complete.

With an initial lead of 10M & lift of 2M

As per the Item 3 above and with additional lift of 1M

Earthwork excavation for foundation in all classes of soil, hard red earth, shales, murram, black cotton soil and depositing on bank under water with an intial lead of 10m and lift of 2m including cost of all materials, labour, lead, lift etc., complete.

Protection arrangemets with timber shoring using ISMB 150 x 80 mm with wooden planks 40mm thick to prevent earth from slipping from the sides during excavation if needed including cost of all materials, labour, lead, lift etc., complete as instructed by the Engineer at site.

Transporting the surplus earth including debris up to 1 km by tipper, over the intial lead of 10M and lift of 2 M, deposting inplaces and spreading etc., complete as directed by the Engineer at site.

Supplying and providing anti termite pre construction treatment using required chemicals as per relevant specifications including cost of all materials, labour, hire charges for T&P etc., complete.

Refilling with excavated sandy soil and consolidated including cost of all materials, labour, lead, lift etc., complete for basement and foundation as instructed by the Engineer at site.

Supplying and filling in foundation, basement, etc., with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc., complete complying with standard specification including cost of all labour, lead, lift etc., complete as directed by the Engineer at site.

Providing Plain Cement Concrete 1:4:8 using 40mm downgraded size HBS metal including cost all materials, labour, lead, lift, curing etc., complete.

With dewatering

Without dewatering

Providing RCC footing in M20 using 12 to 20mm HBS and cement with minium cement content of 360 kg per cum and maximum water cement ratio of 0.5 including cost of form work, cost of all materials, dewatering, labour, lead, lift, curing etc., complete but excluding cost of steel reinforcement.

Providing RCC column in M20 using 12 to 20mm HBS and cement with minimum cement content of 360 Kg per cum and maximum water cement ratio of 0.5 including cost of form work, cost of all materials, labour, lead, lift, curing etc., complete but excluding cost of steel reinforcement.

Column above footing including dewatering

Up to basement

Ground floor

First floor

Second floor

Third floor

Providing RCC M20 using 12 to 20 mm HBS and cement with minimum cement content of 360 Kg per cum and maximum water cement ratio of 0.5 for GRADE BEAM/PLINTH BEAM including cost of form work, cost of all materials, labour, lead, lift, curing etc., complete but excluding cost of steel reinforcement.

Brick work in CM 1:5 using II class chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" including cost of all materials, labour, lead, lift, curing etc., complete for foundation and basement.

Providing damp roof course in CM 1:3, 20mm thick including cost of water proofing compound, crude oil, cost of all materials, labour, lead, lift etc., complete as directed by the Engineer at site.

Brick work in CM 1:5 using II class chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" inclduing cost of all materials, labour, lead, lift, curing etc., complete for all floors.

Ground floor

First floor

Second floor

Third floor

Providing RCC LINTEL/SUN SHADE/LOFT/SILL SLAB in M20 using 12 to 20mm HBS and cement with minimum cement content of 360 Kg per cum and maximum water cement ratio of 0.5 including cost of form work, all materials, labour, lead, lift, curing etc., complete but excluding cost of steel reinforcement.

Ground floor

First floor

Second floor

Third floor

Providing RCC ROOF SLAB AND WAIST SLAB in M20 using 12 to 20 mm HBS and cement with minimum content of 360 Kg per cum and maximum water content ratio of 0.5 including cost of form work, cost of all materials, labour, lead, lift, curing etc., complete but exlcuding cost of steel reinforcement. (Centering should be done for the soffits of RCC slab using MS sheet of size 90 x 60 cm and 10 SWG stiffened and welded to 25 x 25 x 3 mm MS angles laid over silver oak joints of size 10cm x 6.5 cm and supported by casuarina props of 10cm to 13 cm dia complying with standard specification).

Ground floor

First floor

Second floor

Third floor

Providing RCC ROOF BEAM in M20 using 12 to 20 mm HBS and cement with minimum cement content of 360 KG per cum and maximum water cement ratio of 0.5 including cost of form work, all materials, labour, lead, lift, curing etc., complete but excluding cost of steel reinforcment.

Ground floor

First floor

Second floor

Third floor

Supplying and fixing of TMT/RTS reinforcement rods for all RCC works in all floors including cost of steel, binding wire, labour for fabrication, lead, lift, etc., complete.

Brick work in CM 1:3 using II class chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" for partition walls including cost of all materials, labour, lead, lift, curing etc., complete.

Ground floor

First floor

Second floor

Third floor

Floor finish with CM 1:3, 20 mm thick for outside floors and line threaded including cost of all materials, labour, lead, lift, curing etc., complete.

Floor finish with Vitrified tiles of size 600 x 600 x 8 mm of approved quality and make, over CM 1:3, 20 mm thick and pointing with coloured mortar in all floors including cost of all tiles, all materials, labour, lead, lift, curing etc., complete.

Skirting with Vitrified tiles of 8 mm thick of approved quality, colour and size over CM 1:3 , 20 mm thick and pointing with coloured mortar in all floors, including cost of all materials, lead, lift, curing etc., complete.

Floor finish with non slippery ceramic tiles of approved quality, make, colour and size over CM 1:3, 20 mm thick and pointing with coloured mortar in all floors including cost of tiles, all materials, labour, lead, lift, curing etc., complete.

Dadooing with glazed tiles of size 300 x 300 mm, 6 mm thick of approved quality, colour, make and size over CM 1:3, 20mm thick and pointing with coloured mortar in all floors, including cost of tiles, all materials, labour, lead, lift, curing etc., complete.

Supplying and fixing of solid core flush shutters with TEAK ply on both sides with TEAK wood lipping alround 35 mm thick fixed to country wood frame of size 100 x 75 mm and fully threaded GI screws with following fixturtes for 'D1' doors including polishing the door , cost of all materials, labour, lead, lift etc., complete. i) 6 Nos. Iron hold fasts ii) 3 Nos Stainless steel butt hinges iii) 2 Nos of anodized alimunium tower bolt iv) 1 No anodized aluminium aldrop, v) 1 No Rubber Brush, vi) 1 No wind stopper, vii) 2 Nos anodized aluminium handles viii) 1No metallic magic eye and door chain ix) 1 No Chromium plated internal locking arrangement with Mortice lock (Godrej or equivalent with night latch) with 3 keys.

Supplying and fixing of factory made paneled door shutter using solid core flush shutters with TEAK ply on one side and commercial ply on the other side with TEAK wood lipping alround 35 mm thick fixed to country wood frame of size 100 x 75 mm and fully threaded GI screws with the following fixtures for 'D2' doors including painting with two coats of approved enamel paint over one coar of primer including cost of all materials, labour, lead, lift etc, complete. i) 6 Nos. Iron hold fasts ii) 3 Nos Stainless steel Butt hinges iii) 2 Nos. anodized alimunium tower bolts iv) 1 No anodized aluminium aldrop, v) 2 Nos Anodised aluminium handle vi) 1 No Rubber brush vii) 1 No wind stopper viii) 1 No Internal locking arrangements with Mortice lock with 3 keys.

Supplying and fixing of PVC framed solid core SINTEX door or equivalent quality single leaf door with the following fixtures i) 3 Nos stainless steel butt hinges ii) 2 Nos. anodised aluminium tower bolt iii) 1 No anodized aluminium aldrop iv) 2 Nos Anodised aluminium handles including cost of all materials, labour, lead, lift, labour etc., complete.

Supplying and fixing steel door with single/double leaf using required angles for door frames, suitable flats and stiffeners as required for the door including cost of all steel materials, labour, lead, lift etc, complete as instructed by the engineer at site including two coats of enamel paint over one coat of steel primer.

Providing and fixing in position of powder coated Anodized Aluminum framed glazed sliding window of suitable aluminium frame and cleat angles as per specification including fixing the window in position, cost of all materials,rubber beeding, aluminum beeding etc., all labour charges, transport charges, lead, lift etc complete as instructed by the Engineer at site.

Supplying and fixing of fixed type country wood Louvre type ventilators as per specification with glazed louvers of 4 mm thick, suitable MS round rod, including cost of all materials, labour, lead, lift, enamel paint with two coats over one coat of primer etc., complete.

Inside Plastering with cement mortar 1:5, 12mm thick in all floors, including cost of all materials, labour, lead,lift,curing, etc., complete

Ceiling plastering with cement mortar 1:3, 10mm thick in all floors, including cost of all materials, labour,lead, lift, curing, etc., complete.

Outside Plastering with cement mortar 1:5, 20 mm thick for external surfaces in all floors including cost of all materials, labour, lead, lift, curing etc., complete.

White washing two coats with white cement including cost of white cement, Fevicol type gum, brushes, all labour, lead, lift, etc., complete.

Colour washing two coats using ready mixed plastic emulsion water based paint of first class quality and approved colour over one coat of priming coat including thorough scrapping, clean removal of dirt, etc., complete and including cost of all materials, necessary plaster of paris, whereever required for interior walls in all floors.

Colour washing two coats with ready mixed plastic emulsion water based paint of first class quality and approved colour over one coar of priming coat including thorough scrapping, clean removal of dirt, etc., complete and including cost of all materials, necessary plaster of paris, whereever required for exterior walls in all floors.

Providing weathering course using pressed tiles of size 230 x 230 x 18 mm in Cement mortar 1:3 mixed with 10 % crude oil and pointed with same oiled mortar over a bed of pure slakedlime & brick jelly concrete to an average thickness of 80mm, well beaten with wooden mallet to required slope over the roof slab, including cost of all materials, lead, lift, labour, curing etc., complete.

Supplying and fixing of Oriya pan type Indian water closet of size 580 x 440 mm, white colour with "P" or "S" trap with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete, sand filling, fixing labour, connecting to existing line using 110 mm dia PVC pipe of 60 mm long, etc., complete in all floors.

Supplying and fixing of European type water closet with white cistern ' P' or 'S' trap, double flapped seat and seat cover and 10 liter capacity low level PVC tank with all internal fittings including cost of brick jelly concrete, fixing labour, connecting to existing line etc., complete in all floors.

Supplying and fixing of Wash basin 550 x 400 mm white colour, with cast iron brackets, 32 mm dia CP waste coupling, rubber plug and chain, 32 mm dia PVC pipe, 15mm dia GM Gun metal valve, 15mm dia nylon hose connection, 15mm dia brass nipples, 15mm dia CP pillar tap with all fittings including cost of all materials, labour, lead, lift etc., complete (Without pedestal) in all floors.

Supplying and fixing of MS grills for sit out and windows using suitable MS angle and MS flats including cost of all materials, welding charges, transporting etc., complete including two coats of enamel paint over one coat of steel primer as instructed by the Engineer at site.

Supplying and and fixing of brass chromium plated steel towel rail 600 mm long (1no), semi-circular marble soap slab(2 Nos) (minimum 1 Sq.ft each) as directed by the Engineer at site including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing of PVC pipes of 6 Kg/cm² pressure rating with specials such as bends, coupler, Tee cowls, Tee door, bend door, shoes clamps, PVC adhesive etc., including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of 110 mm dia PVC pipes of 4 Kg/Cm² pressure rating with specials such as bends, coupler, Tee, Cowls, Tee door, bend door, shoes, clamps, PVC adhesive, etc.,including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of PVC heavy duty pipes of 10 Kg/Cm² Finolex (or) equivalent with ISI monogram with necessary specials and fittings, PVC adhesive, for water supply including cost of all materials, labour, lead, lift, etc., complete.

32 mm PVC

25 mm PVC

Supplying and fixing of 12mm dia Stainless steel quarter turn Tap as directed by the Engineer at site including shellac, thread ball and cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing of 100mm dia stainless steel shower including cost of CP stop cock, shellac, thread ball and all materials, labour, lead, lift etc., complete.

Supplying and fixing of approved half way ball valve( heavy duty) including PVC FTA, shellac, solvent, thread ball and cost of all materials, labour, lead, lift etc., complete.

35mm valve

25mm Valve

Supplying and fixing of 1000 litres capacity PVC water tank of approved quality and colour including cost of all materials, tank fittings, lead, lift, labour for erecting in position, etc., complete.

Supplying and fixing of readymade RCC machine pressed Manhole cover with frame of size 600 x600 mm heavy duty including transportation and cost of all materials, lead, lift, etc., complete.

Supplying and fixing of PVC sanitary fittings in position including cost of all materials, labour, lead, lift, etc., complete.

Nahni/ Floor trap with PVC grating

Gulley trap with cover

Supplying and fixing in position of country wood panelled cup board using country wood frame 100 x 40 mm & shutter frame 75 x 32 mm double leaf with both side pre-laminated MDF board 12 mm thick with the following fixture i|) 6 nos butt hinges ii) 2 nos tower bolt iii) D-type handle iv) Godrej padlock as per specification including cost of all materials, labour, painting the frames with two coats of enamel paint over one coat of primer, etc., complete.

Supply and fixing of granite slab of 20mm thick of required size, single side finish for cooking platform in all floors, including cost of all materils, labour, lead, lift, etc., complete.

Supplying and fixing of Cuddapah kitchen sink of size 0.60 x 0.60 x 0.30m with waste water pipe & necessary fittings including cost of all materials, labour, lead, lift, curing etc., complete as directed by the Engineer at site.

Supplying and fixing of cuddapah slab 25 mm thick of required size double side finish for cup board slab in all floors, including cost of all materials, labour, lead, lift, curing etc., complete.

Supplying of good quality water for construction and curing works including cost of water, hire charges for water tank, Transport to the site, all labour, lead, lift etc., complete as instructed by the Engineer at site.

ELECTRIFICATION

Supplying and fixing of 4 way D.B with 32 amps DPIC switch with fuse and neutral on suitable TW box with earthing materials as per PWD standard .(SD No. 155).

Supplying and fixing of 16 A DPIC switch of 500 V with metal clad with fuse and neutral (side handle) on suitable TW box with earth connection only including cost of all materials, labour, lead, lift, etc., complete (SD No.142).

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed copper cable of 1100V in suitable PVC rigid pipe concealed in wall and ceiling for lights and buzzers with PVC accessories in flush with wall with 3mm thick Hylem sheet cover with TW switch box and 5A flush type switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point (Buzzer switch should be at main entrance of each flat) with 5amps FT switch, ceiling rose, cable, pipe etc., complete. (SD .23)

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed copper cable of 1100V in suitable PVC rigid pipe concealed in wall and ceiling for lights and buzzers with PVC accessories in flush with wall with 3mm thick Hylem sheet cover with TW switch box and 5A flush type switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed fan point including cost of specials, clamps, screws, all materials, lead, lift, labour etc., complete.

Wiring with 2 x 1.5 sq. mm PVC insulated unsheathed copper cable of 1100 V in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with 150 x 100 x113 mm TW Box with 3mm thick Hylem sheet cover for 5A 3 pin non inter locking flush type CS plug with continuous earth wire connection by 14SWG TC wire for making good of the concealed portion with suitable colour for PVC plug point including cost of all materials such as cables, pipe etc., complete. (SD No. 38).

Wiring with 2 x 4 sq. mm PVC insulated unsheathed copper cable of 1100 V in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with 150 x 100 x113 mm TW Box with 3mm thick Hylem sheet cover for 15A 3 pin non inter locking flush type CS plug with continuous earth wire connection by 14SWG TC wire for making good of the concealed portion with suitable colour for PVC plug point including cost of specials, clamps, screw, all materials, lead, lift, labour etc., complete. (SD No. 40).

Wiring with 3 x 1.5 sq.mm PVC insulated unsheathed copper conductor cable of 1100v in suitable PVC rigid pipe concealed in wall and ceiling for light points with PVC accessories in flush with wall with 3 mm thick Hylem sheet cover for TW switch box and 5A F.T switch (2 way) with continuous earth wire connection by 14SWG TC wire for making good of the concealed portion for fan with 5amps F.T switch, ceiling rose complete for head including cost of specials, clamps, screw, all materials, lead, lift, labour etc., complete. (SD No.31).

Supply and fixing of standard quality fancy glass shade, 11W CFL, battery holder (Bakelite) for BH point including cost of all materials, labour, lead, lift etc., complete.( SD No. 80).

Supply and fixing of water tight B.H fittings with guard (Philips/Bajaj/Crompton/K.Lite) for incadescent lamp suitable for 11W CFL for staircase, terrace & portico including cost of all materials, labour, lead, lift etc., complete.(SD No. 83)

Supply and fixing of single box type 4'-40 W fluroscent fittings with tube light complete with electronic ballast with TW round blocks on walls or ceiling with PVC unsheathed copper leads from terminals to the fitting including cost of all materials, labour, lead, lift etc., complete. (SD No. 87).

Supplying and fixing of TNEB meter board suitable for 3phases 63A service connection made up of suitable angle iron frame work of size 2feet x 1 1/2 feet using angle iron of size 1 1/2 x 1 1/2 x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necesssary bolts and nuts supports and supply and fixing of 3 nos 63A fuse units (500V) one no neutral link, copper earth flat of size 1 x 1/4 " with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete. (SD No.129)

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300V regulator, as approved by the Engineer with necessary down rod, fan clamp with side plates and cross arm of required size with continuous earth connection including cost of all materials, labour, lead, lift etc., complete.(SD No. 106).

Supplying and fixing of AC/DC buzzer /call bell of suitable size for 230 V single phase AC supply with push switch, concealed for each tenement including cost of all materials, labour, lead, lift etc., complete.(SD No.105).

Wiring with single pair telephone cable in suitable PVC rigid pipe concealed in wall for intercom plug with PVC accessories in flush with wall and 100 x 100 x 113 mm TW box with Hylem sheet cover for intercom female plug including supplying and fixing of intercom female plug, making good of the concealed portion with suitable colour for PVC plug point, cost towards supply for all materials, such as cable, PVC pipe, labour, lead, lift , etc., complete.

Supply and run of 1.5/2 sq.mm Copper cable suitable for earthing the main switch board and individual boards and inter connection between earth pits including U nails and cost of all materials, labour, lead, lift etc., complete.

Road Work

Providing laying,spreading and compacting graded stone aggregates to Wet Mix Macadam as per specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by the tipper to site, laying with pavers in base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of materials, labour charges,rentals of machinery ,fuel and all other incidental chargs etc..,complete as directed by the Engineer at site and as per clause 406 of MORTH Rev-5.

Providing RCC 1:1.5:3 for road work using 12 to 20mm HBS including cost of all materials, labours, lead, lift, curing, shuttering cost,including provision of contraction, expansion construction and longitudinal joints as per standard practice, joint filler, joint sealant, mild steel dowl bar of required size etc., complete as instructed by the Engineer at site but excluding the cost of steel reinforcement.

Providing RCC 1:1.5:3 for drain and culvert using 12 to 20mm HBS including cost of all materials, labours, lead, lift, curing, shuttering etc.,complete excluding cost of steel reinforcement.

Supplying and spreading with gravel for the side berms including filling, watering and compacting etc., complete as instructed by the Engineer at site.

Please enter GST in %

VASANTHA CONSTRUCTIONS PRIVATE LIMITED

SRI SASTHAA CONSTRUCTIONS