MOHALLA SAI VIHAR COLONY BIJNOR MAI SAI MANDIR KE SAMNE CC ROAD NALI NIRMAN WORK LOT 3

E/W in cutting or in embankment in ordinary soil including ramming and dressing the surface to required levels and slopes.excavated earth carted from distance up to 5.0Km as per direction of Er. I/c S.I.No. 253(a)+ chapter 3

Concrete with 4cm gauge approved Stone ballast, coarse sand and cement in proportion of 8:4:1 including supply of all materials labour and completion of the work .S I no 281

M 150 Class Brick Work 1:3 Cement and approved Coarse sand of 2.25 fm in foundation and plinth including supply of all materials, labour Taxes and T&P etc required for proper completion of work S.I. No. 307

12 MM thick Plaster with one part of cement and Three part of approved Corse Sand Mortar including supply of all materials labour and completion of the work S.I.no 583.

W.B.M. G-3 (22.4- 53 mm stone ballast) providing] laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness] hand packing] rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 aspser Technical Specifiaction Clause 405.

Construciton of un-reinforced, dowel jointed at expansion and construciton joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M30 Grade, coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregates not exceeding 25mm, mixed in a concrete mixer of not less than 0.20cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side formwork steel channel, laying and fixing if 125 micron thick polythene film, wedges steel plates including leveling the formworkas per drawing spredaing the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion construciton joints, applying debonding strips, primer sealant, dowel bars, nearapproaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for14-days, using curing compound where specified and water finishing to lines and grade as per drawing and Technical Specification clause 1501. including supply of all materials labour and completion of the work .S I no Ch-20 New Item no 4.

Concrete with 2cm gauge approved Stone ballast, coarse sand and cement in proportion of 4:2:1 including supply of all materials labour and completion of the work .S I no 279 a

R.C.C. 1:1.5:3 with cement corse sand &20 mm gauge stone grit i/c including supply of all materials, labour and all tax T&P etc 284 A

M.S. or Iron work in plain work such as R.C.C. or R.B. work including bending for proper completion of work and including supply of steel as per complete

S/F Sine Board at site including material labour and T&P etc.as per direction of Engineer incharge. etc complete.